Milk Weigher Tenders

Get complete information related to latest Milk Weigher Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Milk Weigher Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Milk Weigher Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

Central Government / Public Sector

CTN :40539427

23 Jun, 2025 NA

Sambalpur - Odisha

Tender For supply of bridge testing kit:- inspection tools consists of: (1).rivet testing hammer 310 mm long & we ight 110 grms (2). magnifying glass 100mm (3). freeman`s pocket steel tape with bubble & belt clip 3 met er long. (4). freeman`s glass fibre tape 30 meter long. (5). precision rail welding straight edge as per is-22 20-1990 with centre knotch & handle 1 meter long. (6). aluminium sounding rod 4 meter long extendable t ype. (7).tilting mirror (convex) (8). inside calliper 10 inch long measurement range: 0 to 10-11/16 in. (9). o utside calliper 10 inch long measurement range: 0 to 10 in (10). prismatic binocular (olympic/nikon)- falco n 10 x 50 or similar 10x zoom (11). shim feeler gauge 4 inch having 10 leaves of 0.05mm to 0.80mm. = 0 2 nos. (12). chisel = 02 nos. (13). safety belt (14). safety helmet as per is:2925 (15). bridge cam welding gauge. size(mm)-0-60, angle-60 ,70,80,90 to take accurate reading of welding of steel welded girders. (16) . heavy duty laser plumb bob with hook string and runner (17). standard wire gauge (18). optical crack m easuring microscope (19). concrete test hammer measuring range 10 to 70 n/mm?, impact energy = 2.207 nm (20). digital coating thickness gauge for ferrous metals, measuring range 0-1250 micron (21). laser ta rgeting distance meter for measuring distances is as bridge heights and hard to reach objects range up to 30 meter. (22). led torch (23). plaster of paris in case (24). red paint with brush and thinner (25). chalk m arker (26). piano wire 30 meters length (27). chipping hammer (28). spirit level with two bubble (29). tds meter digital spec: 0.19-990 ppm (30). chloroscope (chlorine test kit)drinking water testing kit, hardnes s, ph range, chloride, fluoride, nitrate turbidity test, weight of master kit 3kgs. approx) (31). thickness gau ge (32). wire brush (33). good quality protective gloves & eyewear (34). rebound hammer (35). nicely fini shed storing and transportation box and case for keeping above items with all relevant items from srl no 1 to 35. with all relevant items from sr no 1 to 35. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500170

03 Jun, 2025 NA

Kazipet - Telangana

Tender For supply of transportation of 65 nos loco wheels of wag-9, drawing no. 1209-01-111-003 from nhava sheva/mumbai to smm/els/kzj/scr - kazipet, unde r kadipikonda bridge, warangal, telangana, total weight: 36.84 mts. ]

Central Government/Public Sector

CTN :40459620

09 Jun, 2025 NA

Kazipet - Telangana

Tender For supply of transportation of 65 nos. loco wheels of 3-ph wap-7, drawing no. 1209-01-111-070 from nhava sheva/mumbai to smm/els/kzj/scr - kazipet, under kadipikonda bridge, warangal, telangana, total weight: 36.72 mts. ]

State Government

CTN :40425610

04 Jun, 2025 NA

Mulshi - Maharashtra

Tender For providing all types of electrical and electronic equipment in gram panchayat hinjawadi during the financial year 2025-26. - electrical material, supplying and erecting modulartype switch6a / 10a isimark approved make duly erected on provided plate and box with wiring connections complete.(8-1-2), supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. oh-pl/stp, supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation (weight 175 kg.) as per specification no. . oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv (1-3-29), supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification no fg odf/fls-2, supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm 7-1-15, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying, erecting & marking tpmcb 6 a to 32amp in provided distribution board 5-3-14, supplying, erecting & marking fpmcb 40a

Loading, Please wait...

Milk Weigher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government