Latest mill coupling bolt Tenders | Government mill coupling bolt Tenders

State Government

CTN :43255522

24 Dec, 2025 1.50 Lacs

Barmer - Rajasthan

Tender For supply of ms full thread nuts

State Government

CTN :43255523

24 Dec, 2025 1.50 Lacs

Barmer - Rajasthan

Tender For supply of ms half thread nuts

CTN :42619647

22 Dec, 2025 NA

Khurda - Odisha

Tender For bid to ras bid to ras corrigendum : supply of connection pipe with nuts (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , condenser 4 mfd , aluminium tower bolt 150mm , bipin holder , three pin plug 5 amp , ampere tape , three pin plug 16 amp , aluminium service cable , insulation tap , grease , aluminium aldrop 250mm , bib cock , particle board , pvc cover , dendrite , aluminium aldrop 200mm , ms nails , gi pipe , iron bracket , kit forll level flushing cistern , aluminium wire mesh , bracket for curtain rod , cp stop valve , hack saw blade , pvc pipe , plywood , tower bolt , hasp and staple , bow handle , sand paper , gi grating , bow handle , helical door spring , butt hinges , ss grating , door stopper , gi nipple , gi elbow , gi tee , pvc grating , galvanised iron tee 15mm , m seal , conduit pipe , nut bolt , hook and eye , screw 75mm , gi socket , plastic washer , white cement , nails , butt hinges , washer for bib cock , screw 25mm , screw 20mm ) /bid number : gem/2025/b/6844754 * /dated: 06-11-2025 & & / bid document 1 / 50

CTN :42884678

22 Dec, 2025 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : dr.mvr rtpp-procurement of ms, ss, ht bolts, nuts, washers, studs, allen bolts and hex bolts of bmd & ahp of stage-iv and cam of stage-i- offer- req- reg

CTN :42888261

22 Dec, 2025 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : dr.mvr rtpp-procurement of ms bolts, nuts, washers, studs, allen bolts and hex bolts of bmd, tms, cam & mrt of stage-i-

CTN :43171573

23 Dec, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of wc european type d d--floor drain traps (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , european pattern toilet seat vitreous china (q3) , sinks / wash basins vitreous china as per is 2556 (part 4) (q3) , toilet seat indian style squatting pan (q3) , gang box 1x2 way , ply wood size 6x4 ft x 12mm , insulation mat 10 mm thick , lt pole 9 mtr ht , alu handle 150 mm long , ht joint kit 95 sq mm 3 core , pre laminated particl board 12mm thick size 4 ft x 8 ft interrior grade one side decorative choice lamination and other sixe balancing white laminated , gi pipe 20 mm dia , cable lugs aluminium of various size ie 16 sqmm to 95 sqmm , pre laminated particl board 9mm thick size 4 ft x 8 ft interrior grade one side decorative choice lamination and other sixe balancing white laminated , cable lugs aluminium of various size ie 120 to 240 sqmm , corner glass shelf , gi pipe 15mm dia , alu handle 100 mm long , lt joint kit 70 sqmm 3. 5 core , lt joint kit 50 sqmm 3. 5 core , wire 4 sqmm 3 core copper , lt joint kit 95 sqmm 3. 5 core , window door stainless steel kabja size 3 inch , pvc casing caping 1 inch , window door stainless steel kabja size 6 ich , gi pipe 50 mm dia , union 20 mm , gang box 1x4 way , ms sliding bolt 250mm long , switch piono type 5 or 6 amps , reducer 80 x 50 mm , lt insulation tape red yellow blue black , fevicol synthetic resin adhesive , reducer 25 x 20 mm , m seal , aluminium tower bolt 200mm long , ms door spring incl roller helical 200mm long , ms sliding bolt 300mm long , union 80 mm , union 40 mm , union 25 mm , reducer 40 x 25 mm , nipple 50 x 100 mm , speed paint thinner , nipple 25 x 100 mm , socket 20 mm , steel almirah handle 6 inch , nipple 20 x 100 mm , union 50 mm , nipple 20 x 150 mm , socket 25 mm , elbow 80 mm , nipple 25 x 50 mm , aluminium sliding bolt 250mm long , nipple 80 x 100 mm , nipple 20 x 50 mm , aluminium tower bolt 150mm long , socket 50 mm , gang box 6x8 way , iron wire nail size 4 inch , socket 40 mm , iron wire nail size 2 inch , iron wire nail size 3 inch , iron wire nail size 1 inch , white cane for chair , elbow 25 mm , elbow 20 mm , glycol , star delta starter 10 hp motor , nuts bolts of various size for cable lugs , gi red socket 15x20 mm , gi tank nipple 15mm , gi tank nipple 20mm , sheet glass shelf assembly , gi tee 15mm , ms butt hinge 100mm , 6 ft x 3 ft x12mm plywood bwr , 7 ft x3 ft x12mm plywood , varnish , terpene oil , cloth malmal , star delta starter 12. 5 hp motor , star delta starter 20 hp motor , star delta starter 25 hp motor , star delta starter upto 40 hp motor , gi union 15 mm , gi elbow 15 mm , gi nipple 15x100 mm , pvc tank 500 ltr , pvc tank 1000 ltr , gi pipe 80mm dia , gi socket 15mm , gi nipple 15 x 150 mm , lakh dana , synthetic enamel paint gray , melamyne wood polish , synthetic oxide colour yellow brown , epoxy metal putty , hadraulically regulated door closer

CTN :43225570

29 Dec, 2025 15.75 Lacs

Belgaum - Karnataka

Tender For supply of aldrop bolt alum 300mm long with nut and bolt , aluminium bow handle 100 mm , aluminium bow handle150 mm , aluminium door stopper 150mm , ball cock 20 mm , barrel nipple gi 15 mm 60 mm long , barrel nipple gi 15 mm 75 mm long , brush 2 inches , cp bow handle , female threaded adapter 25x20 mm , female threaded adapter 20x15 mm , female threaded elbow 25x20 mm , floor paint , male threaded adapter 20x15 mm , nails 1 point 5 inches , nails 2 inches , nails 2 point 5 inches , nails wire 25 x 2 mm , nails wire 30 x 2 mm , nails wire 50 x 2 point 28 mm , nails wire 75 x 4 mm , oil putty , paint brush 25 mm , paint brush 50 mm , paint red , paint rfu smok grey white , reducer socket 25x20 mm , reducing bush 25x20 mm , reducing elbow 25x15 mm , socket reducer 25x20 mm , socket reducer 50x25 mm , soda ash , star screw wood steel 25 x 10 mm , tank nipple 25 mm , tee reducer gi 20 x 15 mm , tee reducer gi 25 x 15 mm , teflon tape , union gi 20 mm , union gi 25 mm , upvc coupler 25 mm , upvc end cap 15 mm , upvc equal tee 20 mm , upvc union 20 mm , laminated sheet , block board , star screw wood steel 15 x 08 mm , star screw wood brass 20 x 06 mm , star screw steel 45x8 mm , star screw 25 mm , star screw steel 32x8 mm , star screw 20 mm , star screw steel 16x8 mm , star screw steel 12x8 mm , paint black , paint white , paint og , primer , fevicol sh , french polish , nails wire 50 x 3 point 2 mm , nails wire 40 x 2 mm , nails wire 65 x 3 point 2 mm , nails wire 125 x 5 point 8 mm , nails wire 100 mm , nails 1 inches , bow handle ms 100mm , but hinges ms 75 mm , thinner , aldrop ss 250mm with required nuts and bolts , aluminium bow handle 125 mm , aluminium bow handle 75 mm , bow handle ss 100mm , bow handle ss 150mm , clamp for gi pipe 20 mm , concrete nails , cotton thread for plumber best quality , cpvc reducer 20 x 25mm brass , cpvc socket 20 mm brass , cpvc socket 25 mm brass , elbow 20 mm cpvc brass , gi reducer tee 15 x 25 mm. , glass corner shelf 12 inches , glass panes 450x600x5mm , glass panes 600x900x3mm plain , nails head less 20 mm , nails wire round 20 mm long , nails wire round 40mm long , nails wire round 50 mm long , sliding door bolt aluminium 300 mm , solvent for cpvc , ss bow handle 125mm , stainless steel knobs for drawers and cup board , tee 20 mm cpvc brass , tee equal gi 15 mm , white cement , aluminium door handle 200 mm , gi bend 15 mm , gi bend 20 mm , gi nipple 20 x 100mm , gi nipple 20 x 150 mm , gi socket 50 mm , gi socket reducer 25 x 15 mm , gi socket reducer 50 x 25 mm , nails half inch for wire mesh , pvc bend 110 mm , pvc bend 75 mm , pvc pipe socket 75 mm , pvc pipe110mm , pvc tee 110mm , wall putty , water tank lid //bid details2 / 91

CTN :43170416

23 Dec, 2025 13.00 Lacs

Sonitpur - Assam

Tender For supply of navya e e-- copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , bathroom water shower (v2) (q3) , soap dish - case (q4) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , waste pipe (q3) , tower bolts (ferrous metals) as per is 204 (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , water storage tank 500 ltrs 4 layer , looking mirror 450 by 600mm with pvc frame , cp paper roll , wire mesh ss 1 pt 2 m wide 15m long with wire dia pt 56 mm and aperture value 1 pt 4mm , bib tap pvc 15 mm , hydraulic door closer , health faucet cp 1 or 1 pt 5 mtr long , flash strip self adhesive 100mm by 1mtr , cement ppc 50 kgs , sink cock cp long body 15mm , stop cock cp 2 way 15mm , health faucet pvc 1 pt 5 mtr long , brass peg set , rubber washer for flushing cistern incl balls , waste outlet ss for sink 32mm , pillar tap pvc 15 mm , decorative knob , rubber gasket with almn body snake guard for door 1 mtr long , ss curtain rod , curtain bracket decorative type for 19 or 20mm curtain rod , door stopper 100mm long , oil putty , door handle aluminium 150 mm , bib cock long body 15 mm ptmt or pvc , sliding door bolt 300 mm aluminium , nipple gi 15 by 100 mm , tank cover of 500 ltr , door stopper 150 mm , stop cock angular pvc 15mm , ms hinges 100mm , elbow gi 15 mm , hasp and staple 75mm , nipple gi 20 by 100 mm , magnet door catcher , tee reducer gi 20 mm to 15 mm , gi elbow 20 mm , floor drain tapes or grating pvc 100mm , ms hinges 50mm , oil bound distemper , gi plug 20 mm , pvc elbow 20 mm , cement based paint , grating cp 125mm ) /bid number: gem/2025/b/6997615 * /dated: 13-12-2025 & & / bid document1 / 50

CTN :43159177

27 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For supply of office shelter c c - orl ds wall panel 4000x1000x50mm , orl ds wall panel 900x1000x50mm , orl ds wall panel 1900x1000x50mm , mild steel bar tmt bar 8mm dia and upto 16mm dia to length , office shelter wall panels , office shelter window , office shelter roof ceiling , fd security fence angle iron picket 65x65x6mm length 2 point 8 mtr , fd security fence ms flat 50x5mm of 1 point 80m ht , fd security fence ms flat 50x5mm jindal 3 mtr , fd security fence angle iron picket 50x50x6mm strut post of height 2 point 35mtr jindal , fd security fence barbed wire , fd security fence chain link fence dia wire 4mm and size of mesh 100x100mm , fd security fence 12mm dia 50mm long bolt with nuts and 2x washers for each set , solar security lights set ) /bid number: gem/2025/b/6972224 * /dated: 12-12-2025 & & / bid document1 / 24

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

Mill Coupling Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government