Latest milling cutter Tenders | Government milling cutter Tenders

Central Government/Public Sector

CTN :45077948

13 May, 2026 NA

Delhi - Delhi

Tender For supply of ultra thermic cutting electrode consumables of size (3/8 inchx 36 inch), model no.inbr/9591-25 for the use cutting equipment inbr/a5/30x2irr. as per attached annexure [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44698679

06 May, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, a

CTN :45071902

25 May, 2026 2.70 Lacs

Nagpur - Maharashtra

Tender For supply of brazed carbide milling cutter for machining of aluminium alloy as per fs/t-1408 b/2. , thread milling cutter to drg. no. fs/t-1103d

CTN :44773885

12 Jun, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of solid tungsten carbide mica milling cutter-dimension: od.-20 mm., id -7 mm., thk.-0.95 mm, no. of teeth-20 to iso grade k20, tungsten carbide; composition: tungsten carbide-94% & cobalt-6%, hardness-91.8ra. [ warranty period: 30 months after the date of delivery ]

CTN :45078949

12 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of solid tungsten carbide mica milling cutter-dimension: od.-20 mm., id -7 mm., thk.-0.95 mm, no. of teeth-20 to iso grade k20, tungsten carbide; composition: tungsten carbide-94% & cobalt-6%, hardness-91.8ra. [ warranty period: 30 months after the date of delivery ]

CTN :45057329

15 May, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of 4100401605 high feed mill cutter dia. 40 mm, connection dia. min 36 mm, with thread end, through co , 4100401606 indexable mill. insert for high feed milling cutter dia. 40 mm, insert cutting edge lengt , 4100401607 bt 40 adaptor screw fit type, for high feed milling cutter along with all attachments, co , 4100401608 insert screw for clamping of indexable milling insert for high feed milling cutter dia. 4 , 4100401609 key/spanner suitable for clamping of indexable milling insert for high feed milling cutte

Central Government And Public Sector

CTN :45061681

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant 48 feet distance east-west direction along p.c.c road and 49 feet distance in north- south direction.

Central Government And Public Sector

CTN :45061684

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:back of steel melt shop, near peepal tree 62 feet north from east-west p.c.c road. east-west 59 feet and north-south distance 85 feet.

Central Government And Public Sector

CTN :45061685

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant east-west 48 feet distance and 80 feet north-south along temporary road.

Central Government And Public Sector

CTN :45061686

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant east-west 100 feet distance and north-south 64 feet distance.

Milling Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector