Latest mineral processing machinery Tenders | Government mineral processing machinery Tenders

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

Central Government/Public Sector

CTN :45486268

03 Jul, 2026 NA

Prayagraj - Uttar Pradesh

Tender For supply of coarse aggregate 20 mm &10 mm nominal size of granite stone and fine aggregate (coarse river sand) to concrete sleeper plant, subedarganj, prayagraj

corporations/Associations/Others

CTN :45498277

01 Jul, 2026 NA

Kasimpur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; plain cement concrete work under cable tray and other area at 1x660 mw harduaganj thermal power station, kasimpur aligarh, up; service provider

State Government

CTN :45462730

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For annual rate of hotmix material for various roads under rajpipla (r&b) division rajpipla (2026-27) - providing and laying premix semi dense bituminous concrete with b.t. aggregate as per morth gradation & using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg./10 sq.m. on bt surface with asphalt grade vg-30 for mixing @ 50.00 kg./m.t. including heating and mixing the aggregate and asphalt by continuous of batch mix plant and hot laid process laying with paver finisher and consolidation with roller as per morth specification to achieve desire density, including cost all materials equipments, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor's own machineries batch mix plant and paver finisher etc. complete. plant and paver finisher etc. complete. providing and laying 50 mm thick bituminous macadam with b.t. aggregate as per morth specification and using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg. / 10 sq.m. on bt surface with mechanical sprayer and bulk asphalt vg 30 for mixing @ 34.00 kg./m.t. i.e. 3.40 percentage of total weight of mix including heating and mixing the aggregate and asphalt in continuous of drum mix plant and hot laid process spreading the same by paver finisher and consolidation with roller as per morth specification to achieve desire density, including providing all materials equipments, tools and plants, fire wood, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant and paver finisher etc. complete. providing & laying bituminous grout 37.5 mm thick compacted with asphalt of vg 30grade @ 1.99 percentage by weight of mix for mixing and 2.5 kg/10 sqm. of rapid curing emulsion for tack coat and using b.t. chips of required gradation including cleaning and heating asphalt premix materials by hot mix process in proper gradation and laying with sensor paver finisher and consolidation work as per most specifications including cost of materials labours labour equipment and plant fuel oil complete.... providing and laying 250mm thick wet mix macadam (w.m.m.) in two layers (each layer of 150mm avearge) using machine crushed black trap aggregate of 40 to 50 mm size in the material with water omc in mechanically mix (pug mill) carriage of mix material by contractor's 1.000 own tipper to site of work including laying, spreading and compacting in sub base, base course on well prepared under base of compacting as per most specification to achieve the desired density (mechanically providing & laying bituminous prime coat asphalt @ 7.5 kg / 10 sqm. of slow curing emulsion as per most specifications including cost of materials labours labour equipment etc. complete..... labour charges for spreading hotmix / drum mix material on scattered area of road by manually in regular shape including surface dressing with wire brush and spreading of sand including cost of sand. complete. (for patch work) labour charges for spreading hotmix / drum mix material by paver finisher including heating and spraying tackcoat as per requirement consolidation by static roller and spraying stone dust as directed etc. complete. providing and laying asphalt painting on b.t. surface with bitumen v.g. 30 at rate of 5 kg./10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.mt. / 10 sq.mt. in selected length of the road including rolling and cost of asphalt. providing. laying built-up spray grout base course intwo layers with bitumen at rate of 15 kg./per 10 sq.m. with 0.50 cu.m. stone aggregate for first layer and 15kg. of bitumen and 0.50 cu.m. of stone aggregate per 10 sq.μ. of roadsurface for second layer and using 0.13cu.m. of key aggregate per 10 sq.m. excluding rolling and consolidation complete. (stone aggregate and bitumen shall be paid separately) surface dressing two coat with bitumen using 18kg.bitumen per 10.0 sq.m. with 0.15 cu.m. of stone chipping 12mm nominal size per 10.0 sq.m. for first coa

CTN :45463659

29 Jun, 2026 NA

Birbhum - West Bengal

Tender For replacement of damaged/missing precast concrete slabs at different area inside plant, bktps.

CTN :45474615

22 Jun, 2026 16.49 Lacs

Jalore - Rajasthan

Tender For construction of cement concrete road dammar plant to savaram ke ghar se mala ram ke ghar tak nagar palika area sanchore

CTN :45477072

22 Jun, 2026 16.49 Lacs

Sanchore - Rajasthan

Tender For construction of cement concrete road dammar plant to savaram ke ghar se mala ram ke ghar tak nagar palika area sanchore

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

CTN :45435640

20 Jun, 2026 5.01 Crore

Gangtok - Sikkim

Tender For providing and laying bituminous concrete 3.00 cm and 4.00 cm thick compacted including correction works with dbm 5.00 cm thick compacted with hot mix plant using crushed aggregates of specified grading laying with paver finisher including cleaning of - providing and laying bituminous concrete 3.00 cm & 4.00 cm thick compacted including correction works with dbm 5.00 cm thick compacted with hot mix plant using crushed aggregates of specified grading laying with paver finisher including cleaning of road surface, applying tack coat, road marking 2.5 mm thick and providing & fixing of road studs as per mort&h specifications between km 0.00 to km 5.127 (net length-5.127 km) on road northern by pass (bc 4.00 cm) under part ‘a’, between km 4.800 to km 6.250 (net length-1.450 km) on road gangtok-chungthang (bc 4.00 cm) under part ‘b’ and between km 0.00 to km 1.540 (net length-1.540 km) on swastik approach road (bc 3.00 cm) under part ‘c’ for resurfacing works for fy 2026-27 under 129 rcc in 764 brtf area under project swastik in sikkim state 3rd call’’

CTN :45444903

16 Jun, 2026 65.00 Lacs

Ludhiana - Punjab

Tender For estimate for lining of peori disty rd 20137-26187 (extension portion) off taking rd 25518/r of raika feeder by concrete lining m-15 concrete mix, mixed in automatic batching and mixing plant, carried to site in transit mixers, laid manually with s - estimate for lining of peori disty rd 20137-26187 (extension portion) off taking at rd 25518/r of raika feeder by concrete lining m-15 concrete mix, mixed in automatic batching and mixing plant, carried to site in transit mixers, laid manually with specified thickness.

Mineral Processing Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government