Latest mining equipment Tenders | Government mining equipment Tenders

Central Government/Public Sector

CTN :40490261

03 Jun, 2025 96

Davangere - Karnataka

Tender For e-tender for supply installation & commissioning of medical equipments for the year 2025-26 - portable x-ray 100 ma (cghdvg2025), portable ultrasound machine (cghdvg2025), electric suction machine 1/2 hp(cghdvg2025), laryngoscope -adult and paediatric (cghdvg2025), crash cart (cghdvg2025), instrument trolly (cghdvg2025), cautery machine (cghdvg2025), cbc machine 3- part (cghdvg2025), man man drill (cghdvg2025), battery operated hand drill- with saw (cghdvg2025), hand drill cannulated with kwire, screw, reamer attachments plus(cghdvg2025), k wire set (0.8mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm) (cghdvg2025), pneumatic tourniquet ( peadeatric and adult- for both upper and lower limbs )(cghdvg2025), bone nibbler (cghdvg2025), bone plier (cghdvg2025), jumbo cutter (cghdvg2025), k wire cutter (cghdvg2025), lead jackets (cghdvg2025), charnleys retractor (cghdvg2025), patellar clamps (cghdvg2025), ss wire passer (cghdvg2025), periosteal elevator (small) (cghdvg2025), periosteal elevator (medium) (cghdvg2025), periosteal elevator (large) (cghdvg2025), serreted reduction clamps (small) (cghdvg2025), serreted reduction clamps (medium) (cghdvg2025) , serreted reduction clamps (large)(cghdvg2025), osteotomes (curved) (cghdvg2025), osteotomes (straight) (cghdvg2025), bone scoops (small/medium/large) (cghdvg2025), bone scoops (medium) (cghdvg2025), bone scoops (large) (cghdvg2025), teflon exchange tube (cghdvg2025), plate bending forceps (cghdvg2025), broad long retractors (cghdvg2025), distal screw pointer (1ml/l nail) (cghdvg2025), bone punch elevator (cghdvg2025), bone cement removal set (cghdvg2025), bone holding clamps (small) (cghdvg2025), bone holding clamps (medium) (cghdvg2025), bone holding clamps (large) (cghdvg2025), bone guage (curved) (cghdvg2025), bone guage (straight) (cghdvg2025), counter sync (2.5/3.5/4.5/6.5) (cghdvg2025), bone cement gun (cghdvg2025), mippo wire passer (cghdvg2025), screw removal & broken screw removal set hollow mill set of 3 screw head removal plier screw thread removal plier drill set of 3 conical threaded tap set of 3(2.7mm,3.5mm,4.5mm)square type tap set of 2 ( 3.5 mm,4.5 mm), femoral distractor (femoral distractor). (cghdvg2025), minimally invasive spine surgery implantation set(cghdvg2025), arthrex bone burr drill system with 4mm,4.5mm and 5mm bone burrs. (cghdvg2025), spinal instrument set (cghdvg2025)

Central Government/Public Sector

CTN :40446814

13 Jun, 2025 NA

East Singhbhum - Jharkhand

Tender For supply of transformer typre welding machine , driling machine , portable drill machine , pedestal grinder , pneumatic grinder , base bench vice

corporations/Associations/Others

CTN :40389755

16 Jun, 2025 22.20 Lacs

Bacheli - Chhattisgarh

Tender For providing of custom bid for services - annual maintenance contract of kiosk for mining equipments

corporations/Associations/Others

CTN :40398360

16 Jun, 2025 22.20 Lacs

Bacheli - Chhattisgarh

Tender For annual maintenance contract of 11kv and 6.6kv kiosk for mining equipments at electrical services

CTN :39038230

06 Jun, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

CTN :39038241

06 Jun, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

State Government

CTN :39898671

28 May, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage - tm- procurement of various t and p materials p electrode drying oven, capacity:5kg, model: arc-3101 (or) equivalent make: arcon (or) esab (or) ador fontech , screw extractor set, size:m3 to m25, spiral flute structure, left hand cobalt drill bits:16 nos multispline cobalt screw extractors : 13 nos spiral flute cobalt screw extractors: 6 nos model: exd35(or) equivalent along with carrying case make:snap-on (or) bosch (or) taberia , rotary hammer drilling machine with sds plus, hand operated, make:bosch model:gbh 4-32 dfr professional in carrying case with auxiliary handle along with one set of drill bits 6- 32mm (concrete) , 18v cordless impact wrench, model: gds 250li (or) equivalent make:bosch (or) hikoki (or) dewalt , impact wrench, 1"square drive along with 4 nos inlet bushing and 2 sets of throttle valve kit. model:cp-6920-d24, type: pneumatic make:chicago pneumatic ultimate torque: 2600 nm including all accessories , hand torque multiplier, range: max input:540 nm, max output: 2700 nm with offset and straight reaction arms range:max input:540 nm, max output:2700 nm accuracy: 4% output square:1" input square:3/4" multiplication ratio:5:1 weight:3.7kg reaction type: bar and cranked make: snap-on (or) bosch (or) mekaster , die set for outer threading; type: metric m6-m24 coarse and m6-m24 fine . material: hss; no of dies: 20; die sizes: coarse: m6 x 1.00, m8 x 1.25, m10 x 1.50, m12 x 1.75, m14 x 2.00, m16 ? 2.00,, ?18 x 2.50,, m20 x 2.50, m22 x 2.50, m24 x 3.00 fine: m6 x 0.75, m8 x 1.00, m10 x 1.25, m12 x 1.50, m14 x 1.50, m16 x 1.50, m18 x 1.50, m20 x 1.50, m22 x 1.50, m24 x 1.50, with die holder and the adaptor; material: hss , allen key, black finish 32 mm heavy duty material: make: taparia (or) snap-on (or) chromium vanadium steel dewalt (or) bosch torque wrench, 12-68nm,1/2" sq. drive make:taparia (or) mekaster (or) mac master , torque wrench, 135-675 nm,3/4" sq. drive make:taparia (or) mekaster (or) mac master , socket bit adapter,sq.drive, 1" (f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter,sq.drive, 1" (f) to 1/2"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive,3/4"(f) to 1"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive, 1/2"(f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m55x3/4"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m70x1"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch

State Government

CTN :35872072

30 May, 2025 15.70 Crore

Bhubaneswar - Odisha

Tender For corrigendum : tender for supply, installation and commissioning of neurosurgery equipment for scb mch-cuttack and vimsar-burla - "high speed pneumatic drill system unit price to be mentioned in col.3 should include the basic equipment cost and all other accessories and consumables with specified quantity as mentioned in technical specification) n.b. format b (price break up of unit basic machine + standard accessories+necessary consumables): it is mandatory to quote the price of unit basic machine along with the price of each standard accessory and necessary consumables with required quantity exactly as mentioned in the technical specification or any modifications made in subsequent amendment, in this format and upload along with price boq. the total of the break up prices (excluding taxes) mentioned in the pdf file should be the same as the unit price mentioned in the respective boq file (excel file). the bidders have to upload the cost of spare parts in format c of the separate price bid format in pdf attached in the e-tender portal for this tender reference no. "

CTN :40155262

26 May, 2025 NA

Kharagpur - West Bengal

Tender For supply of heavy duty pneumatic drill/reamer machine capacity(steel) drilling dia 25.4 mm free s peed 450 rpm overall length 370mm air inlet thread size 1/2 inch chuck capacity(size) 32mm [ warra nty period: 30 months after the date of delivery ]

Mining Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government