Get complete information related to latest Miphocal Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Miphocal Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Miphocal Tenders.
Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di
Tender For material purchase for submersible and tube well repairing for drinking water under narayanpur gram panchayat - 25 mm (1") pvc pipe (brand name:- falcon, dupol, polo, utkarsh), 75 mm (3") pvc pipe (brand name:- falcon, dupol, polo, utkarsh), 1-1/4" pvc pipe (brand name:- falcon, dupol, polo, utkarsh), 75 mm (3") pvc stainer 3.0 meter (brand name:- falcon, dupol, polo, utkarsh), 75 mm (3") pvc stainer 1.8 meter (brand name:- falcon, dupol, polo, utkarsh), 25 mm (1") pvc l socket, 25 mm (1") pvc t socket, 38 mm (1.5") brush l socket, 38 mm (1.5") brush t socket, 25 mm (1") union, 25 mm (1") pvc mta, 25 mm (1") pvc fta, 25 mm (1") gi nipple, pvc adapter (1"-1/4"), pvc ball valve, 25 mm (1") water tank nipple, pvc bib cock tap (water teck, aqua teck or similar type with isi marked), taplon tape, 1.5 mm, 3 core flat cable (isi marked) (brand name:- havels, gloster), 25 mm (1") saddle, 32 mm (1 x 1-1/4") gi elbow, 32 mm (1-1/4") gi clamp, gi wall guard, 3 layer water tank, 1.5 hp (18-20 stage) water submersible pump of v3 model including panel box (brand name:- crompton, kiloskar, fontex, cri), single starter (panel box) for 1.25 hp motor
Tender For gi pipe 15mm nominal bore and length 6m , gi pipe 20mm nomimal bore and length 6m , gi pipe 25mm nominal bore and length 6m , equal elbow of 15 mm nominal bore , gi elbow size 20mm nb , gi equal elbow of 25 mm nominal bore , gi nipple dia 15 x 50mm lg made , gi nipple of 15 mm nominal bore and length 75 mm , gi nipple size 15mm nb x 100mm lg , socket union of 15 mm nominal bore , gi union size 20mm nb , socket union of 25 mm nominal bore , gi socket size 15mm nb , gi socket of 20 mm nominal bore , gi socket size 25mm nb , gi equal t size 15x15x15mm nb , gi equal tee of 20 mm nominal bore , gi tee25x25x25mm , 15 mm nominal bore ptmt pillar tap , 15 mm nominal bore ptmt angle valve , 15 mm nominal bore ptmt stop valve , pvc waste pipe for urinal , 32 mm pvc urinal waste pipe with threaded end , spindle for tap size designation number 1 , spindle for tap size designation number 2 , spindle for tap size designation number 3 , spindle for tap size designation number 4 , spindle for tap size designation number 5 , spindle for tap size designation number 6 , disc spindle for tap , flexible garden pipe for nominal bore 15 mm and length minimum 30 m , flexible garden pipe for nominal bore 20 mm and length minimum 30 m
Tender For tee all side female thread , gi 1 by 2 inch elbow both side female thread , gi 1 inch elbow both side female thread , gi 2 inch elbow both side female thread , lugs pin type 1.5 sq mm tinned copper insulated packet of 100 piece , lugs pin type 2.5 sq mm tinned copper insulated packet of 100 piece , super lock nylon cable tie sl 150 packet off 100 piece , super lock nylon cable tie sl 250 packet off 100 piece , bolt and nut ss m10 x 50mm with 2 washer packet off 100 piece , bolt and nut ss m8 x 40mm with 2 washer packet off 100 piece , bolt and nut ss m6 x 25mm with 2 washer packet off 100 piece , bolt and nut ss m4 x 50mm with 2 washer packet off 100 piece , bolt and nut ss m12 x 50mm with 2 washer packet off 100 piece , bolt and nut ss m12 x 80mm with 2 washer packet off 100 piece , bolt and nut ss m16 x 100mm with 2 washer packet off 100 piece , sorf flanges as per ansi b16.5 class 150 of size 15nb moc.ms , sorf flanges as per ansi b16.5 class 150 of size 25nb moc.ms , sorf flanges as per ansi b16.5 class 150 of size 50nb moc.ms , sorf flanges as per ansi b16.5 class 300 of size 50nb moc.ms , sorf flanges as per ansi b16.5 class 150 of size 80nb moc.ms , sorf flanges as per ansi b16.5 class 300 of size 80nb moc.ms , stainless steel 304 syphone, connection 1 by 2 inch npt male,working pressure steam - 14 kg by cm2 , ss 304 1 by 2 inch tube 1.2 mm thk , ss 304 1 by 4 inch tube 1 mm thk , connector male aluminium 8 mm tube od x 1 by 2 nptm , connector male aluminium 11 mm tube odx 1 by 2 nptm , connector male aluminium 8 mm tube od x 3 by 4 nptm , connector male aluminium 11 mm tube od x 3 by 4 nptm , connector male aluminium 8 mm tube od x 1 by 4 nptm , connector male aluminium 11 mm tube od x 1 by 4 nptm , connector male aluminium 10 mm tube od x 1 by 2 nptm , connector male aluminium 10 mm tube od x 1 by 4 nptm , connector male aluminium 10 mm tube od x 3 by 4 nptm , union tee aluminium 8 mm tube od , union tee aluminium 11 mm tube od , union bulkhead aluminium 8 mm tube od , union bulkhead aluminium 11 mm tube od , union bulkhead ss 6 mm tube od , union bulkhead ss 10 mm tube od , connector male ss 1 by 2 inch tube x 1 by 2 inch nptm , connector male ss 1 by 4 inch tube x 1 by 4 inch nptm , 1 by 4 inch bsp male x 6 mm tube ss304 , pvc tape anchor for cable insulation , teflon tap mseal for pipe fittings , ms stud m 10 x 1000 mm , ms stud m 12 x 1000 mm , ss stud m 10 x 1000 mm , ss stud m 12 x 1000 mm , ss 1 by 2 inch high pressure ball valve , ss 1 inch high pressure ball valve , ibr 1 by 2 inch high pressure ball valve , ibr 1 inch high pressure ball valve , ss 2 inch anchor fasteners 8mm , ss 2 inch anchor fasteners 10mm , anabond 100 gm, tube , regular epoxy compound 100 gm , allenkey bolt m4 x 100mm packet off 100 piece , allenkey bolt m4 x 50mm packet off 100 piece , pu tube pipe 10 mm od to 6.5 mm id heavy duty blue , pu tube pipe 8 mm od to 5.5 mm id heavy duty blue
Tender For supply of instrument consumable fittingssupply of instrument consumable fittings - rustlick 631,370 ml spray bottle , qd-electrical contact cleaner , pipe wrench heavy duty,straight,length-14 inch,taparia , gi 1 inch to half inch reducer socket both side female thread , gi 1 1 by 4 inch to 1 inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 1 by 4 inch reducer socket both side female thread , gi 1 1 by 4 inch to 1 by 2inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 by 2 inch reducer socket both side female thread , gi 1 by 2 inch to 3 by 8 inch reducer socket both side female thread , ss 1 by 2 inch to 3 by 8 inch reducer socket both side male thread , ss 1 by 2 inch npt m to 3 by 8 inch npt f reducer socket , ss 1 by 2 inch npt f to 3 by 8 inch npt m reducer socket , ss 3 by 8 inch to 1 by 4 inch reducer socket both side male thread , ss 1 by 2 inch to 1 by 4 inch reducer socket both side male thread , ss 1 by 2 inch to 3 by 4 inch reducer socket both side male thread , ss 1 by 2 inch npt m to 3 by 4 inch npt f reducer socket , ss 1 by 2 inch npt f to 3 by 4 inch npt m reducer socket , gi 1 inch union , gi 1 by 2 inch union , gi 1 1 by 4 inch union , gi 1 1 by 2 inch union , ss 1 by 2 inch union , gi 1 inch nipple 6 inch length both side thread , gi 1 inch nipple 4 inch length both side thread , gi 1 by 2 inch nipple 6 inch length both side thread , gi 1 1 by 4 inch nipple 6 inch length both side thread , gi 1 1 by 2 inch nipple 6 inch length both side thread , gi 2 inch nipple 6 inch length both side thread , ss 1 by 2 inch nipple 6 inch length both side thread , ibr 1 by 2 inch nipple 6 inch length both side thread , gi 1 inch tee all side female thread , gi 1 by 2 inch tee all side female thread , gi 1 1 by 4 inch tee all side female thread , gi 1 1 by 2 inch tee all side female thread , gi 1 by 2 inch elbow both side female thread , gi 1 inch elbow both side female thread , gi 2 inch elbow both side female thread , lugs pin type 1.5 sq
Tender For bid to ras supply of 12 watt white-led based solar street lighting system as per mnre specification (q3) , gi pole 5 mtr , 45watt inverter street light , 90 watt inverter street light , gi socket 25mm , gi socket 40 mm , gi socket 50 mm , gi elbow 40 mm
Tender For supply of water supply pipe line hand pump bore well repair anf repairing material under np raghogarh - water supply materiasl, cid joint 80mm dia class 15, cid joint 100mm dia class 15, cid joint 80mm dia class 10, cid joint 100mm dia class 10, ci sluse valve 50mm dia heavy duty, ci sluse valve 80mm dia heavy duty, ci non return valve 50mm dia heavy duty, rubber packing sheet, nut bolt all size, ci flang 50mm dia heavy duty, ci flang 80mm dia heavy duty, threst plate, acp pipe 150mm dia class15, hand pump rod socket 12 mm, hdpe pipe 75mm dia pe100/10kg, starter oil p, gi pipe 32mm dia with socket class b heavy duty 5 kg/rmt, gi pipe 50mm dia with socket class b heavy duty 8 kg/rmt, gi socket 50mm dia seamless, gi socket 50mm dia, gi bend 50mm dia, gi clamp 50mm dia 150mm length, main switch 63 amp., main switch 100 amp., gi nipple 50mm dia 100 mm length, gi redeuser 50mm x 75mm, copper cable 3 core 16 sqmm (falcon or finolex make), bore cap 6 inch, bore cap 8 inch, gi end cap 2 inch, gi end cap 3 inch, submerciable moter pump single phase 3 hp 160m., gi elbow 2 inch, gi elbow 3 inch, gi/ci t 2 inch, gi/ci t 3 inch, cpbc pipe heavy duty 16mm dia, handle hand asembly compleate, padestanal heavy duty, water chamber, ci cylender heavy duty (deep well), upper valve assembaly compleate, check valve assembaly compleate, ms rod 3m - 12mm, hexagonal nut bolt, chain nut bolt, chain with cupler, handle excell, bearing 6204 heavy duty\, naitril washer, leather washer, rubber sealing ring, uppor valve guide seat, submercible motor pump 15 hp motor 12 stage pump (falcon /texmo/cri or equelent make), starter 1 hp to3 hp switch penal, starter 10 to 15 hp delta, control penel board oil starter 20 to 35 hp (two button), control penel board oil starter 20 to 35 hp (trhee button), rubber ring 80 mm, rubber ring 100 mm, auto switch 7 wire semi, 9 wire wth, pvc cable 3x4 sqmt standard make (falcon /finolex or equlent make), pvc cable 3x6 sqmt standard make (falcon /finolex or equlent make), copper cable three core 16sqmt standard make (falcon/finolex or equlent make), nariyal rassa, pvc rassa, teflon tap, clamp 1/2 ", clamp 1 ", clamp 1 -1/4", clamp 2", clamp 2-1/2", clamp 3", black roll pipe 3/4 ", black roll pipe 1", black roll pipe 1-1/4", tala 50mm, tala 60 mm, tala 75 mm, penchkas, plaash, pipe rinch 12 ", 18" & 24", 7/16 coper wire, 1.5 coper wire, 1" over flow footwall, 63 a. kit kat, 100 a. kit kat, 63a. m.c. b. for pol, 100a. m.c. b. for pol, 125a. m.c. b. for pol, 1 hp open well moter ci body, over head tank 1000l.
Tender For ms erw 250nb , ms erw 200nb , ms erw 150 nnb , ms erw 75 nb , sorf flange 100 nb 150 , sorf flange 150 nb 150 , 45 deg elbow 150 nb , 45 deg elbow 200 nb , 90 deg elbow 150 nb , 90 deg elbow 200 nb , blrf 150 nb 150 , caf gasket style 20 , 100 nb , caf gasket style 20 , 15 nb , caf gasket style 20 , 150 nb , caf gasket style 20 , 25 nb , caf gasket style 20 , 50 nb , gi pipe 15 nb , gi pipe 25 nb , gi pipe 50 nb , gi 45 deg elbow 50 nb , gi 90 deg elbow 25 nb , gi 90 deg elbow 50 nb , gi blrf flange, 150cl, 50 nb , gi swrf flange, 150cl, 25 nb , gi sorf flange, 150cl, 50 nb , gi swrf flange, 150cl, 15 nb , 15 nb half coupling , 15 nb gi tee one side threaded , 25 x 25 x 15 mm gi unequal te , 15 nb 90 deg gi socket weld , 15 mm sockolet, sch 80 , stud bolt 1 by 2inch , length 55 mm , stud bolt 1 by 2inch , length 70 mm , stud bolt 1 by 2inch , length 85 mm , stud bolt 3 by 4inch , length 100 mm , stud bolt 5 by 8inch length 90 mm , supply and installation of double hydrant , supply and installation of monitors , supply and installation of hose box , hose fire figting , supply and installation of gate valve 100 nb , ball valve 15nb 800 , supply and installation of y strainer , supply and installation of deluge valve , supply and installation of spray nozzl with coupling , supply and installation of flp pressure switch , supply and installation of quartzoid bulb , supply and installation of glycerine filled pressure gauge 0 20 kgf by cm2 , supply and installation of soleniod valve with coil , supply and wrapping of wrapping coating , fabricaiton of pipeline , laying of pipeline a by g , laying of pipeline b by g , surface preparation sand blasting , primer ms erw pipes , mio ms erw pipes , final coat ms erw pipes , etch ,ezp pri and synth enml gi , back filling , brick masonary , external plaster 30 mm , excavation , supply and laying of hume pipe 150 nb , ms inserts plate ,angle channel etc , pcc , rcc m20 grade , s,f,e and w of structural steel , gi honey comb gratings , reinforcemnent steel , lettering upto 2 inch , erection of valves , hydrant , monitors, hose boxes , fab erect air station with ins , air filter regulators , fabrication and erection of 15 nb and 25 nb air line , s,f,e of pipe supports , s,f,e, of hand railshand rails
Tender For supply of gi pipe c class 15mm jindal swastik,gi pipe c class 20mm jindal swastik,gi pipe c class 1 inch jindal swastik,gi pipe c class 1 inch 8mm jindal swastik,gi pipe c class 1inch 15mm jindal swastik,gi pipe c class 2 inch jindal swastik,gi pipe c class 2inch 15mm jindal swastik,di pipe 3 inch with vasher 20 feet length,di pipe 4 inch with vasher 20 feet length,elbow 15mm gi,tee 15mm gi,socket 15mm gi,union 15mm gi,handel valve gate valve 15mm gi,elbow 20mm gi,tee 20mm gi,tee 20mm gi,socket 20mm gi,union 20mm gi,handel valve gate valve 20mm gi,elbow 20mm x 15mm gi,tee 20mm x 15mm g i,socket 1inch gi,elbow 1 inch gi,union 1 inch gi,handel valve gate valve 1inch gi,tee 1inch gi,tee 1inchx 15mm gi,elbow 1 inch x 20mm,tee 1 inchx 20mm,socket 1 inchx 15mm,socket 1 inchx 20mm gi,elbow 1 inchx 20mm gi,tee 1inch 8mm gi,elbow 1inch 8mm,socket 1inch 8mm,union 1inch 8mm gi,handel valve gate valve 1 inch 8mm gi,tee 1 inch 8mm x 15mm gi,tee 1 inch 8mm x 20mm gi,tee 1 inch 8mm x 1 gi,elbow 1 inch 8mmx 15mm,elbow 1inch 8mmx 20mm,