Latest mobile repair kit Tenders | Government mobile repair kit Tenders

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

CTN :45085574

15 May, 2026 NA

Aliganj - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; supply and installation of hardware - connecting screwdriver, neon tester, screw driver set, insulated combination pliers, insulated side cutting pliers, long nose pliers, soldering iron, electrician knife, tweezers, digital multi meter, soldering iron changeable bits, de-soldering pump, steel rule, steel measuring tape, tools maker vice, crimping tool (pliers), scriber straight, allen key set, double ended spanner, magnifying lenses, hacksaw frame adjustable, cold chisel, scissors, handsaw, drill machine (electrical), first aid kit, fire extinguisher, bench vice, dual dc regulated power supply, lcr meter (digital), cro dual trace (component testing facilities), battery charger, analog multi meter, function generator (triangular, square and sine wave), electronic work bench, comprising of dc power supply, dmm, amm, cro, function generator, dimmer-stat, component, tray, soldering station., dimmer state, analog component trainer, op amp trainer, digital ic trainer, digital ic tester

Central Government/Public Sector

CTN :45072404

25 May, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of 32 types of tools - battery gun standard , feeler gauges 0.05mm to 1.0mm , torque wrench 5 to 25 nm , torque wrench 1 to 200 nm , allen key set 1.5 to 32 mm , magnetic lifter for fod & removal , vacuum cleaner portable , inspection mirror flexible , stop watch digital , knock out punch de rivetting , tap wrench , strap wrench capacity 125 mm , electronic soldering iron 230v 68w , hand tap m5x0.8 to 6h for tapping , hand tap m6x1 to 6h for tapping , helicoil hand tap set m 4 x 0.7 set of 3 , helicoil hand tap set m 5 x 0.8 set of 3 , helicoil hand tap set m 6 x 1.0 set of 3 , helicoil hand tap set m 8 x 1.0 set of 3 , helicoil hand tap set m 8 x 1.25 set of 3 , helicoil hand tap set m 10 x 1.25 set of 3 , helicoil hand tap set m 12 x 1.25 set of 3 , helicoil hand tap set m 24 x 2.0 set of 3 , helicoil hand tap set m 30 x 2.0 set of 3 , helicoil thread plug gauge m2 x 0.4 , engraving gun 230v ac , centre punch 4 , oil can capacity 500 cm3 , measuring jar 5 litres , spirit level for levelling purpose , rivet removal tool , depth gauge

CTN :44687071

07 May, 2026 24.17 Lacs

Bathinda - Punjab

Tender For corrigendum : supply of supply of superstructure of small store shelter , supply of construction material , supply of electronic , supply of earthing items , supply of lightening conductor , supply of furniture items , supply of tools

Central Government And Public Sector

CTN :45045298

21 May, 2026 3.92 Lacs

Mumbai - Maharashtra

Tender For custom bid for services annual maintenance contract of electronic key and tld management system; installed electronic key management system and electronic tld s management system at ctcrs building. the product details are as follows: (1) electronic key management system (1 nos. - 96 keys), 1) rfid card access based key management system with cabinet for 96 keys, 2) software for key management system, 3) id card and keyfob enrollment device set, 4) spare user console module, 5) spare key holding module, 6) spare battery backup power supply, (2) electronic tld management system (2-48 tlds, 1-96 tlds), (1-48 tlds rack, 1-96 tlds rack at ct & crs and 1-48 tlds rack at mod lab b-block), 1) cabinet suitable for 48 tld's, 2) cabinet suitable for 96 tld's, 3) emergency release tools for tld racks, 4) usb based tld tag reader, 5) usb based rfid idcard card reader, 6) battery backed power supply, 7) spare rfid tag for tld..

CTN :44734555

02 May, 2026 39.94 Lacs

Bathinda - Punjab

Tender For bid to ras corrigendum : supply of supply of field flush latrine,supply of construction material,supply of construction material for soakage pit,supply of building and repair,supply of electronic and earthing items,supply of construction material for earthing pit,supply of tools

CTN :44747596

02 May, 2026 8.23 Lacs

Bathinda - Punjab

Tender For bid to ras supply of supply of superstructure of medium store shelter , supply of construction material , supply of electronic , supply of earthing items , supply of lightening conductor , supply of furniture items , supply of tools

Central Government And Public Sector

CTN :45024341

19 May, 2026 8.52 Lacs

Chamba - Himachal Pradesh

Tender For supply of general electrical and mechanical consumables items and loose tools d d - 96 sq mm ammeter0-100a , ac ammeter 030a , ammeter 0 -250a analog , amp meter 0-50 amp , blanket , cotton hand gloves , crocodile clip , crow bar , d spanner set 6x7- 8x9- 10x11- 12x13- 14x15- 16x17- 18x19- 20x22- 21x23- 24x27- 25x28- 30x32 , decorative rope light , dee shackle 3.2ton , digital vernier calliper 300 mm , drill bit set 1mm to 13mm , d-shackle 10 ton , d-shackle 2mt capacity , d- shackle 5mt , electronic component cleaner co2 500 ml aerosol can , fan regulator module base , gas cutting torch, cuttozen-5 , grease gun 10 kg , grinding wheel bosch 4 inch , hand saw , insulation matt for electrical purpose 1000mm width , led indication lamp 110v , led indication lamp 24v ac-dc , led street light 110w , long travel limit switch , mcb 20amp single pole , mcb 63a single pole , mcb single pole 10a, 240v ac, single pole, c-curve , mcb sp c curve 32 amp , mccb 400a 3 pole , mccb 400a 3 pole 415v breaking capacity 50ka with adjust. thermal o-c and magnetic s-c release , nylon rope 20mm dia in meter , nylon rope 25mm dia in meter , nylon rope 8 mm in meter , nylon slings 10 ton capacity 10 mtr lenth with both side loop , nylon slings 10 ton capacity 5 mtr lenth with both side loop , nylon slings 5 ton capacity 10 mtr length with both side loop , nylon slings 5 ton capacity 5 mtr length with both side loop , nylone rope-10mm in meter , optical fiber cable ofc-6 core , panal voltmeter size 72mmx72mm range 0 to 500v , pvc insulated flexible copper cable 1.5 sq.mm 3 core , pvc insulated flexible copper sheated cable 2 core x 2.5 sq mm , pvc insulated unarmoured two core 1.0 sq mm flexible copper cable , ring spanner set 6x7mm,8x9mm,10x11mm,12x13mm,14x15mm,16x17mm,18 x19mm,20x22mm , screw driver set , slide wrench 12 , socket 16amp 6 pin piano type , steel knife blade , steel weld putty , steel wire rope sling with both end loop- 12mm dia. x 03 mtrs length , steel wire rope sling with both end loop- 16mm dia. x 02 mtrs length , steel wire rope sling with both end loop- 16mm dia. x 04 mtrs length , strip type space heater, 60w, 240v , switch 16 amp,piano type , switch 5a-6a , telephone cable , telephone set , timer for street light , voltmeter square type 0 - 500 v , welder s jacket leather , welding goggles black , welding hand gloves leather , welding lead copper 70 sq.mm , wire rope fluid -lubricant //bid details 2 / 56

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

corporations/Associations/Others

CTN :44996885

30 Apr, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of disposal of static test rig,disposal of electronic-waste (e-waste),disposal of electrical-waste (e-waste),disposal of various types of old, rusted, unusable old scrap ms pipes, etc,,disposal of various old, rusted facilities spare parts/tools, fittings, etc,,disposal of old, used hepa filter,disposal of old, un serviceable motors, pumps, vacuum pumps, valves, hoist etc,,disposal of air compressor system,disposal of three types of liquid nitrogen storage tank,disposal of old, rusted integration tools,disposal of old, rusted gi duct, walk-in coolers panel, tools,disposal of used fuel filters, oil filters, coolant and lube oils etc,,disposal of old, used and dead batteries (hazardous item)

Mobile Repair Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

corporations/Associations/Others