Latest mobile air compressor hiring Tenders | Government mobile air compressor hiring Tenders

Central Government/Public Sector

CTN :40957174

08 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of 1.5t 5 star split ac including green ac nominal marketing capacity as per bee sta r rating label (in ton): 1.5, technology of air conditioner :inverter ac variable speed, iseer (wh/wh) value s for compliance of green ac: not applicable for non green ac, rated voltage (in volts): 230 v, 1 phase, 50 hz, ac, unit mounting arrangement :indoor unit wall mount type, air conditioner compliance : ac, bee star rating of the product : 5, classification by function : cooling & heating (cooling and dehumidification during cooling mode), material of evaporator :copper, material of condenser :copper, ac machine warranty (in ye ars) :1, warranty on compressor (in years) :10 (for inverter ac)up to including 2 ton capacity, rated coolin g capacity (in watts) as peris:1391(part 2): 4750-5800, split air conditioner: conforming to is:1391 (part 2) latest, eco-friendly refrigerant: yes, refrigerant designation: r 32, refrigerant global warming potential (g wp): 675 (for r32), refrigerant ozone depletion potential is zero: yes, classification by function: cooling an d heating (cooling and dehumidification during cooling mode), heating capacity (in watts): 4750-5800, unit type: single split ( single indoor and single outdoor), compressor type: single split ( single indoor and sing le outdoor), compressor type: rotary type/dual or twin, material of evaporator: copper, material of conde nser: copper, material of air filter (on indoor unit): synthetic fibre, reusable air filter: yes, ac modes: turb o mode, auto clean mode, quiet mode, dry mode, eco saving, swing, timer, remote control features: time r ,fan speed control, on/off, additional features: sleep mode, auto off, auto restart, indoor temperature indicator, dust filter, auto air swing, virus deactivation technology,4 way auto air swing, nanotech coatin g on evaporator tubes, noise level: as per is:1391 (part 2) latest, environmental friendly paint: yes (paint does not contain heavy metals or their compounds include mercury(hg), lead (pb), cadmium (cd) and hexa valent chromium (cr), recycled plastic components: >80% by weight of total plastic components in produc t, marking on the split ac: as per cl.17.1.1 and as per cl.17.1.2 of is:1391 (part 2), mode of packing: packe d with recycled and biodegradable material, supply cord and the inter connecting cord between the indoor and outdoor unit: 1 m (pvc insulated sheathed cables as per is:694), accessories / installation kit with each split air conditioner: 3m cu connecting pipe (for wall mount type up to 2 ton),remote control, operating m anual, installation manual, no installation kit, warranty card- ac machine warranty (in years): 1, warranty on compressor(in years): 10 (for inverter ac) up to including 2 ton capacity, availability of type test report from govt. lab/nabl accredited lab /ilac accredited lab to prove conformity of the specification: yes. as pe r is:1391 (part 2) latest, test report number and date - must declare: nabl, agreed to furnish all the test re ports and certificates to buyer on demand: yes. refrigerant pipe of min 3 meters including min connecting cable of 3 mtrs, drain pipe and suitable ms stand (powder coated) along with nut and bolt for fixing outdoo r unit. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40957068

28 Jul, 2025 NA

Rajkot - Gujarat

Tender For supply, installation, testing, commissioning and proving of rotary screw ,electric driven , air cooled stationary air compressor of capacity 300 cfm ,10 kg/cm2 pressure with concomitant accessories as per attached annexure-a. specifications as per cofmow spec. no. cofmow/ir/edac/2019, (rev -01) or latest, at c&w depot/hapa/wr. make- elgi or atlascopco or compair or colt or similar. [ warranty period: 24 months after the date of deliver y ]

Central Government/Public Sector

CTN :40957962

14 Jul, 2025 NA

Katni - Madhya Pradesh

Tender For supply of maintenance spare set as per attached annexure -a, for godrej make electric driven rotary screw type air compressor, cap-500cfm, model-ls20-125hh (air cooled), warranty - 12 month [ warrant y period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40960118

28 Jul, 2025 NA

Ajmer - Rajasthan

Tender For supply of electrical driven rotary screw air compressor cap 500 cfm 10 kg/cm2 [ warranty period: 2 4 months after the date of delivery ]

CTN :40960335

10 Jul, 2025 NA

Radhanaga - Maharashtra

Tender For design, supply, installation, commissioning and proving out of the machine, electric driv en, rotary screw, air-cooled, microprocessor based stationary air compressor of 300 cfm, 10.0 - 10.5 k g/cm2 as per attached annexure. [quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

CTN :40872057

10 Jul, 2025 NA

Radhanaga - Maharashtra

Tender For supply of rotary screw diesel driven air compressor cap 300 cfm 10 kg per cm2 technical specification attached as annexure-a. [quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

State Government

CTN :40935703

11 Jul, 2025 NA

Kheda - Gujarat

Tender For supply of various rotary compressor for split a.c installed at various location of 1x800 mw unit no-8 of wanakbori tps

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

CTN :40566700

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

CTN :40932489

21 Jul, 2025 NA

Jamshedpur - Jharkhand

Tender For supply of split air-conditioner of bee 5-star rating, suitable for cooling capacity for the whol e range of 5201 to 6860 2 ton w (2 ton) with the function of cooling only, with rotary compressor, invert er (variable speed) type, suitable for 230 v ac, 50 hz system, with 100% copper coil, eco friendly refriger ant, anti-freeze thermostat, with thermal protection for blower motor & condenser motor. conforming to bi s specification no. is:1391 (part-2) 2023. bee 5-star rating must comply to ministry of power notification no . s.o. 3897(e) dated 29th october 2019 for table 3.2(f) with minimum indian seasonal energy efficiency r atio of 5.0 (applicability date extended by notifications no. s.o. 4485(e) dated 10th december, 2020 and n o. s.o. 4634(e) dated 10th november, 2021). complying to ministry of power notification no.s.0. 2528(e) d ated 8th august 2017 for other requirements. refrigerant copper pipes (suction & return) of minimum 4-m eter length each, nitrile rubber tube with density 55 kg/cubic meter or more, fire performance class 1, ra te of burning class v-0, water vapour diffusion resistance factor (i) more than 12000, service temperature 10 to 105-degree c, surface flame spread class 1 & thickness of minimum 2 inch, relevant test certificates to be submitted. nitrile rubber tube shall be with suitable inner diameter to suit & to wrap the complete le ngth of refrigerant copper pipe and aluminium foil lamination of 0.2 mm thick to cover entire length of the copper refrigerant pipes will be supplied along with each air-conditioner. make- daikin/ lg/ carrier/ blue st ar/ godrej /hitachi/lloyd, voltas/samsung or similar. [ warranty period: 30 months after the date of deliv ery ]

Mobile Air Compressor Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government