Latest mobile card Tenders | Government mobile card Tenders

corporations/Associations/Others

CTN :40884410

14 Jul, 2025 18.26 Lacs

Moradabad - Uttar Pradesh

Tender For supply and installation of furniture for scada control room at 33/11 kv s/s company baag distt. moradabad under moradabad smart city project distt. moradabad. - supply and fxing combind 5 user console desk size 5500mmx800mmx750mm operator control desk will have following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided. 13- earthing busbar will be provided. 14- cfl/led lamp will be provided for internal illumination. 15- per console 2 nos. 10 amp dp mcb (total 10 nos.) siemens/havells make complete with wiring and fitting will be provided. 16- per console 2 nos. 6 way pdu 5/15 power socket (total 10 nos.) complete with wiring and fitting will be provided. 17- per console 2 nos fan (total 10 nos.) rexnord make complete with wiring and fitting will be provided. 18- per console 2 nos toggle swich for fan (total 10 nos.) complete with wiring and fittings will be provided. 19- per console 2 nos, data socket (rj45) (total 10 nos.) d-link/legrand make complete with wiring and fitting will be provided, 20- per console 02 nos telephone socket (rj11) (total 10nos.) d-link/legrand make complete with wiring and fitting will be provided, 21- per console 1 nos keyboard tray (total 5 nos) ebco/innofit/harmoni make complete with all manner will be provided. 22- per consol 2 nos monitor arm (total10 nos) innofit/harmoni make complete with all manner will be provided. 23- looping will be provided for both type of power supply . all specification include the cost of all material , labour , t&p and other nessesary things required for proper completion of work. colour of lamination of table top , side , front ,back shutter and profile & frame is as per approved by e/i nsi (other important specification in annexure (1) attached as pdf), supply and fxing combind 4 user console desk size 4000mmx800mmx750mm, operator control desk will following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided. 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided.

Central Government And Public Sector

CTN :40962628

14 Jul, 2025 5.81 Lacs

Rajkot - Gujarat

Tender For supply of inirepairfaultcltservicngandcompmaintenaceofpassengerlift 1tekr d d - liftservcie cleaningdoor setting , traction machine repairing , wiring charges mcb , ups lb1000va omglum , lead acid battery 12v 7ah , smpssmpslrs , smt009948vbatterycharging pcb , battery lug for 6sqmm , power monitorting device with single phasing preventer , mcb 50a wo shunttrip4pol , power switching device 18amp , contactor for power switching device , low power switch2co24v dc , load safety device omg lxr , square pb red majestica uparrow , regulated power source omgmw 124 , smt711 single 6pin smd led pcbpmc , positive door contact with clamp , limitswitch actuator , plateropfittingten bolt , plating rope fit stud , traction omg rope 7x193mm ss type , ad liner gutkha assembly for alu bottom , limit switchzv7h23611z1058 , pvcropeclamp10mmassembly , battery12v1dot2ah , landing aluminium bottom track 900mm , adjustable chair type bracket , plating ms stud m10 125 assembly , guide clip for 16mm guide assembly , adjustable counter weight chair type bracket , guide clip for 10mm guide assembly , chemical hit mmplus , pvc tiles 455mm 455mm 2mm , fevicol sr 998 , telephone main unit , telephone hand set unit in side the car , telephone hand set unit at ground floor , labour charges for fixing all items , comprehensive maintenance of 1 no13 passenger lift

CTN :40964041

25 Jul, 2025 NA

West Kameng - Arunachal Pradesh

Tender For supply of 50 watt fm transmitter , internet radio for audio processing , 2 way dipole anteena , rf cable , 19 inch audio video equipment enclosure , 100w dummy load , self supported tower 30 mtr with lightening arrester and earthing , 100 watt active monitor speaker , 12 channel analog audio mixer , condenser microphone , desktop editing workstation for audio video processing , table top mic stand , suspension type mic stand , studio headphone , on air logger software , dynamic cardioid microphone , field recorder , 6 ch audio distribution unit , 6 ch headphone distribution unit , telephone hybrid , power conditioning unit 3 kva with battery set , backup power supply unit 10 kva with canopy , 2 into 2 warm studio light , electric work earthing and wiring complete studio , wall acoustic work , sound proof door , false ceiling treatment , sound proof flooring mat , furniture for production table to house the console outside production studio room comma onair studio table comma transmission room table comma reception table , installation material and freight charge bracket on cable comma connector for audio wiring bracket off , warning light bracket on recording bracket off , warning light bracket on on air bracket off , initial application charge , sacfa clearance charge , spectrum charges , bank guarantee charge , stamp paper charge , notary charges , public performance license for bundle music air time , station manager , technician , attender , radio jockey two member team , electricity bill , refreshment charges , fol charges , air internet , telephone and mobile charges ) /bid number : gem/2025/b/6380130 * /dated: 04-07-2025 & & / bid document 1 / 40

Central Government And Public Sector

CTN :40937122

11 Jul, 2025 2.77 Lacs

Bengaluru - Karnataka

Tender For providing electrical wiring fittings ups wiring lan and telephone cable and associated works for cgm qa office 2nd floor sanchar complex building wms compound jayanagar bengaluru

CTN :40428321

02 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras providing of cluster outsourcing for maintenance of landline and broadband network optical fiber cable network - telephone line, ug cables, internal wiring, distribution boxes and telephone instruments; attending the broadband fault, maintenance of customer access network, att..

CTN :40861402

16 Jul, 2025 NA

Mumbai - Maharashtra

Tender For biannual contract for work of removal shifting up gradation and installation of office data utilities for various departments in bmc - removal of point wiring (light ,fan points,ip,pp,call bell,gong bell,bell indicator points), removal of fixtures / fittings / ceiling fans / bulkhead / street light / gyeser etc., re-fixing of telephone wires/ cables, any type of communication /data cables/ wires in pvc conduit/casing n caping /concealed etc., re-fixing of ceiling fans., re-fixing of tube light fixture with new flexible wire accessories & using old conduit pipe or old t. w. round block., removing of existing old furniture & partitions,etc., designing and providing of metallic variable/ detachable unit as per technical specifications, terms & conditions., designing and providing of metallic fixed volume organizer unit as per technical specifications, terms & conditions., designing and providing of customized closet system as per technical specifications, terms & conditions.

CTN :40871550

11 Jul, 2025 8.45 Crore

Chennai - Tamil Nadu

Tender For construction of indoor shooting range (cisr) of 50mx8 lanes for 27 scg, nsg at regional hub, chennai 127. including internal water supply and sanitary installations and also providing internal electrical installations, ups, power wiring, telephone conduits, lightening conductors, street lights, lan, automatic fire alarm system, fire fighting with down comer system, solar photo voltic plant (20kwp) etc.subwork/packages:construction of indoor shooting range (cisr) of 50mx8 lanes for 27 scg, nsg at regional hub, chennai-127. including internal water supply and sanitary installations and also providing internal electrical installations, ups, power wiring, telephone conduits, lightening conductors, street lights, lan, automatic fire alarm system, fire fighting with down comer system, solar photo voltic plant (20kwp) etc.

Central Government / Public Sector

CTN :40810059

23 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullou t trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with in tegrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet (l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic l aminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside t he cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 n os ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought ou t to interface boxes as one for power supply and another for the communication cables. these boxes shall be designed to accept connections from the control room circuits. 5) modular workstation material shall con firms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-1205 5) certification or latest if any. [ warranty period: 30 months after the date of delivery ]