Latest mobile crane spares Tenders | Government mobile crane spares Tenders

State Government

CTN :40940352

11 Aug, 2025 9.05 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of unique industrial handlers make eot cranes installed at 2x660mw, ph-ii, sstpp, mppgcl, dongalia /etni-ii - "pulse encoder: sn:700001240582, ip 66, f255, ub 9-30v dc).1024ppr, class 2, existing make: baumer" , shrouded type dsl for 110/25t eot: 400a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc. , accessories of dsl , 4 pole hanger clamp , copper joint link , joint cover , current collector , 250a current collector for 110/25t eot. , anti-collision device, model no. acc 102. , dc electromagnetic brake , "dcem brake :code ebdc 300/bm, inrush volt:300v dc, torque :76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/1, existing make: elektromag methods" , "dcem brake: code ebdc 300/bm, inrush volt:300v dc, torque: 76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/2,existing make: elektromag methods" , dyanamic braking resistor. , "dyanamic braking resistor for mh, s.no. sj-342, job no. sj-1348, kw/h.p: 30/ ,volt: 600, amps: 51.3, type: wi30dbr11.4/p6, ohms: 11.4, rating : conti., existing make: speed-o-controls pvt. ltd" , "dbr for ct, s.no. sj-344, job no. sj-1348, kw/h.p: 1.2/ ,volt: 600, amps: 4.5, type: wi1.2dbr60/p6, ohms: 60, rating : conti.,existing make: speed-o-controls pvt. ltd" , "dbr for lt, s.no. sj-346, job no. sj-1348, kw/h.p: 6.4/ ,volt: 600, amps: 19.5, type: wi4dbr16.9/p6, ohms: 16.9, rating : conti.,existing make: speed-o-controls pvt. ltd" , radio remote control , rrc: radio remote control ( shoulder hung, joystic type). range: approx. 355m, frq: 335mhz. (transmeter+ receiver) , rectifier pannel complete unit for dcem brake , "rectifier pannel having sr.no. v-24628/4 is connected with dc brake dia 300 having sr.no. v-24627/4. dc pannel specification: code rpnlc/12, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. v-24628/4, existing make: elektromag methods" , line choke -3phase: inductance 0.157mh, current: 142 amps., imax: 150% , master controler , s.no. sm-1115, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , s.no. sm-1117, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , steps:4, volts: 500, amps: 40/10, c/s: 50, existing make: elektromag methods , anti-collision limit switch :anti collosion limit switch, aux supply :110v-230v (for lt), infra red type, range 5-10mtr. existing make electronic switches , requirement of electrical spare parts for unique make eot crane job no.bg-018-01-02 (tdbfp eot) , relay board 8 channel,110v ac, 2c/o contact, 5a. , shrouded type dsl for 60/10t eot: 160a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc , current collector , 100a current collector for 60/10t eot. , dc electromagnetic brake , dcem 250 dia brake for mh,drum dia 250, 115v. dc, 1.6a , dcem 250 dia brake for ah, drum dia 250, 115v. dc, 1.6a , dyanamic braking resistor. , dbr for mh,s.no. sk-043, job no. sk-072, kw/h.p: 17/ ,volt: 415, amps: 32, type: wi17dbr16.9/p6, ohms: 16.9, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ah s.no. sk-045, job no. sk-072, kw/h.p: 12/ ,volt: 415, amps: 25, type: wi12dbr20/p6, ohms: 20, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ct, 130 ohm, 600w , dbr for lt, 40 ohm , 2kw , rectifier pannel complete unit for dcem brake , rectifier pannel having is connected with dc brake dia 250mm dc pannel specification: code rpnlc250, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. 44979/3, existing make: elektromag methods

CTN :41204079

01 Aug, 2025 102

Multi City - Karnataka

Tender For invitation quotation for data rates of electrical items for bbmp (quotation tender for data rate) - supplying, installing, testing and commissioning of diesel generator set with following specifications. power rating as per standard reference condition as per-bs 5514/iso 3046/ iso 8528 & is 1002/iso 3046 generator set specifications.160 kva / 128 kw, supplying & fixing of 30 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 40 mtr length, d clamp tumble, crane charges, labour charges for data rate, supplying & fixing of 20 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 16 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 12 mtr highmast accessories that include winch plate, 250 kg winch, ss wire rope 50 mtr length, moulded cable 4sqmmx3 core 20 mtr length, d clamp tumble,crane charges, labour charges for data rate, supply and fixing of vertical furnace coil holding bricks (240 x 300 x 80mm) made out of refractory material to with stand a temperature of 1000 c using required refractory cement and other binding material to form into required shape (as per bis-8) complete, supply and fixing of vertical heating element suitable to operate on 220 volts 50hz (4.5 kw capacity of heating element) element shall be made out of 8 swg 25mm dia 6 mm pitch total length 3100 mm superior quality nichrome wire coil and shall be capped with fiberglass tube. new element shall be fixed in furnace heating slots using necessary labour consumable and terminated with end bolts etc complete., supply and replacement of smoke exhaust motor fan shaft fabricated out of ss310 dia 50mm x 780mm length with balancing impler 2nos key slot of 10 x 10mm with computer balancing impler-380mm dia,160mm width, 3mm sheet fabricated(ss304), supply & erection of b-58 belt(), supply & erection of 311h sleeve (adapter)(), hire charges for supply, fixing, wiring, servicing & maintaining of 200 watts led type flood light fitting with accessories. upto 3 days, supply & erection of 22211ck bearing (for exhaust motor )(), providing door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40 x40x100mm shifting block with handle and mounting bracket., supply & erection of 2 wire temperature controller range 0 to 1200.c of size 99 x 99mm,, supply & erection of ss310 pipe thermocouple 19 mmod & 700mm length, simplex, supply & erection of smoke exhaust motor 7.5 hp 3 phase, 50hz,1500rpm, induction motor, with table lock pully 180 dia, 2 nos grove, make abb/kirloskar/suguna or equalent, supply & erection of 1hp single phase 50hz water pump (open well submersibal pump set)(), supply & erection 2hp 3phase, 50hz, 1440 rpm induction flange mounted water pump for scrubber, inlet 2 inch, outlet 1 and off inchinch, supply & erection of 1/2hp 3phase 50hz, 1440rpm flange mounting motor with gear output 10rpm with grounting frame, complete including loading, unloading and transportation to work site spare.(), furnace main door servicing include of bearing replacement 2 nos and door lifting chain replacement(), servicing & cleaning of scrubber, tank,scrubber duct,exhaust blower, exhaust duct furnace to chimny and cleaning of chimny (6 monts once)(), hire charges for supply, fixing, wiring, servicing & maintaining of 150 watts led type flood light fitting with accessories upto one month, providing servicing, repairing and overhauling of existing body charging trolley complete.(), supplying & fixing of epoxy of epoxy insulators (bus bar mounting, supplying & fixing

Central Government/Public Sector

CTN :41201201

07 Aug, 2025 NA

Saharanpur - Uttar Pradesh

Tender For supply & commissioning of diesel hydraulic road mobile crane (20 ton) as per technical specification attached includin g accessories as per annexure a and spare as per annexure b [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41174397

04 Aug, 2025 NA

Khurja - Uttar Pradesh

Tender For procurement of spare parts for preventive maintenance of 270 mt manitowoc 2250 crane sl. no. 2251188 available at khurja site. - procurement of spare parts for preventive maintenance of 270 mt manitowoc 2250 crane sl. no. 2251188 available at khurja site., harness assembly, harness assy, alternator, pulley, display liquid crystal edp, 2250 service kit

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

CTN :40998256

30 Jul, 2025 NA

Multi City - Multi State

Tender For supply & fitment of spare parts as per annexure-a (attached) for 10 ton capacity diesel hyd raulic road mobile crane having regn.no.br08g-1911 (year-2012, model-c8000, make-escorts limited) mo unted with simpson engine. supply & fitment to be done by oem or its authorized dealer only. suitable for escorts c8000. warranty : 30 months from the date of installation. [ warranty period: 30 months after the date of delivery ]

Mobile Crane Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector