Latest mobile field kit Tenders | Government mobile field kit Tenders

State Government

CTN :45167421

20 Jun, 2026 110.30 Crore

Bagalkot - Karnataka

Tender For corrigendum : survey, investigation, preparation of design & drawings, installation, testing and commissioning of lift irrigation scheme consisting intake canal, jackwell cum pump house, pumping machinery, rising main, bleeders and manifolds, pipe distribution network with ms/hdpe/o-pvc pipes including structures all along the pipe distribution network for providing irrigation facility to 1765.0 ha of left out area in jamakhandi and mudhol taluks, bagalkot district including filling up of 7 no mi/zp tanks by lifting water from krishna river under mareguddi lift irrigation scheme and filling of galagali barrage by lifting water from downstream to upstream from krishna river including supply of spares, accessories and tools including operation and maintenance of the entire system for five years from the date of successful commissioning of the entire system on turnkey basis

CTN :45516014

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab machinery and machining tools

CTN :45532272

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For civil department lab machinery and machining tools

CTN :45482035

15 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

corporations/Associations/Others

CTN :45480090

01 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For auction sale of spare parts m/gypsy, etc,new spare parts tata truck/bus-1210, etc,tyre ,tube, etc,badminton racket, etc,jag steel, etc,miscellaneous items, etc,burnt oil, etc,u/s tools, spare parts, etc,misc electric items, etc,dot matrix 24000 printer, etc,sony lcd 700 tvr, etc,machinery and equipments items, etc,hammer 250 gm with handle, etc,badminton racket, etc,battery 12 volt 11 plate, etc,medical equipments, etc,u/s parts of vehicles, etc,hammer with handle, etc,pad lock 65 mm, etc,burnt oil, etc,plastic chair, etc,plastic table, etc,presser cooker, etc

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

corporations/Associations/Others

CTN :45456839

17 Jun, 2026 4.80 Crore

Surendranagar - Gujarat

Tender For request for proposal for supply and installation of 50 tpd dry and wet waste segregation and processing plant with all type of machinery and tools composting plant processing & scientific disposal of solid waste as per swm rules 2016 for surendranagar municipal corporation

State Government

CTN :45462730

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For annual rate of hotmix material for various roads under rajpipla (r&b) division rajpipla (2026-27) - providing and laying premix semi dense bituminous concrete with b.t. aggregate as per morth gradation & using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg./10 sq.m. on bt surface with asphalt grade vg-30 for mixing @ 50.00 kg./m.t. including heating and mixing the aggregate and asphalt by continuous of batch mix plant and hot laid process laying with paver finisher and consolidation with roller as per morth specification to achieve desire density, including cost all materials equipments, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor's own machineries batch mix plant and paver finisher etc. complete. plant and paver finisher etc. complete. providing and laying 50 mm thick bituminous macadam with b.t. aggregate as per morth specification and using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg. / 10 sq.m. on bt surface with mechanical sprayer and bulk asphalt vg 30 for mixing @ 34.00 kg./m.t. i.e. 3.40 percentage of total weight of mix including heating and mixing the aggregate and asphalt in continuous of drum mix plant and hot laid process spreading the same by paver finisher and consolidation with roller as per morth specification to achieve desire density, including providing all materials equipments, tools and plants, fire wood, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant and paver finisher etc. complete. providing & laying bituminous grout 37.5 mm thick compacted with asphalt of vg 30grade @ 1.99 percentage by weight of mix for mixing and 2.5 kg/10 sqm. of rapid curing emulsion for tack coat and using b.t. chips of required gradation including cleaning and heating asphalt premix materials by hot mix process in proper gradation and laying with sensor paver finisher and consolidation work as per most specifications including cost of materials labours labour equipment and plant fuel oil complete.... providing and laying 250mm thick wet mix macadam (w.m.m.) in two layers (each layer of 150mm avearge) using machine crushed black trap aggregate of 40 to 50 mm size in the material with water omc in mechanically mix (pug mill) carriage of mix material by contractor's 1.000 own tipper to site of work including laying, spreading and compacting in sub base, base course on well prepared under base of compacting as per most specification to achieve the desired density (mechanically providing & laying bituminous prime coat asphalt @ 7.5 kg / 10 sqm. of slow curing emulsion as per most specifications including cost of materials labours labour equipment etc. complete..... labour charges for spreading hotmix / drum mix material on scattered area of road by manually in regular shape including surface dressing with wire brush and spreading of sand including cost of sand. complete. (for patch work) labour charges for spreading hotmix / drum mix material by paver finisher including heating and spraying tackcoat as per requirement consolidation by static roller and spraying stone dust as directed etc. complete. providing and laying asphalt painting on b.t. surface with bitumen v.g. 30 at rate of 5 kg./10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.mt. / 10 sq.mt. in selected length of the road including rolling and cost of asphalt. providing. laying built-up spray grout base course intwo layers with bitumen at rate of 15 kg./per 10 sq.m. with 0.50 cu.m. stone aggregate for first layer and 15kg. of bitumen and 0.50 cu.m. of stone aggregate per 10 sq.μ. of roadsurface for second layer and using 0.13cu.m. of key aggregate per 10 sq.m. excluding rolling and consolidation complete. (stone aggregate and bitumen shall be paid separately) surface dressing two coat with bitumen using 18kg.bitumen per 10.0 sq.m. with 0.15 cu.m. of stone chipping 12mm nominal size per 10.0 sq.m. for first coa

CTN :45460353

16 Jul, 2026 NA

Gadhada - Gujarat

Tender For auction sale of metallic, non-metallic - auction of writeoff (condemned) machinery, tools/ equipments, furniture item and raw material scrap items of/in iti botad, ranpur, barwala and gadhada institutes on " as is where is basis" on gem portal through forward auction.

Mobile Field Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government