Latest mobile home Tenders | Government mobile home Tenders

Central Government / Public Sector

CTN :45388425

18 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of flowserve make control valve spares c c - assy, sliding seal, actuator, size 100/200, rotary, 4 stroke, backup ring, 15.50 od, dash #459, bearing, 1.25 stem, vldsk2, 2.50 l, metal, bearing, thrust, maxflo 4/3, 1"/1.50"/2", cl 150/600, bearing, thrust, maxflo 4/3, 3"/4", cl 150/600, bearing, shaft, maxflo 4/3, 1.50/2", cl 150/600, bearing, post, abd, 1.02 stem, maxflo 4/3, 3"/4", bearing, post, abd, maxflo 4/3, 1.50/2", cl 150/600, bearing, shaft, 1.18 stem, maxflo 4/3a, 3/4", dwgrev: 00; bearing, 0.75 stem, vldsk2, 1.63 l,, disk, vldsk2, 4", cl 150/300, disk, vldsk2, 10", cl 150/300, dwgrev: 00;kit, spare part, actuator, size 50, dwgrev: 00; kit, spare part, actuator, size 50, dwgrev: 00;kit, spare part, actuator, size 25, rotary, end post, maxflo 4/3a, 1.50/2", cl 150/600, 2 piece, press fit, 2 bolt, eco 16239, eco 16523, 18883, post assy, p, end post, maxflo 4/3a, 3/4", cl 150/600, 2 piece, press fit,, gasket, elastomer, 2.12 x 1.50, 0.06 thick, gasket, ptfe, 1.55 x 1.14, 0.12 thick, gasket, spiral, 11.12 x 10.38, 0.18 thick, gasket, spiral, 12.00 x 11.25, 0.18 thick, gasket, maxflo 4/3, 37mm x 27mm, 3.50mm thick, gasket, maxflo 4/3, 57mm x 45mm, 3.50mm thick, gasket, maxflo 4/3, 24mm x 18mm, 3.50mm thick, graphite, gasket, maxflo 4/3, 40mm x 30mm, 3.50mm thick, gasket, ptfe, 5.94 od, 5.38 id, .15 thick, gasket, ptfe, 5.345 od, 4.905 id, 0.094 thick, kit, shim, maxflo 3, 2", 150/300, kit, shim, maxflo 3, 3", 150/300, o-ring, dash #024, eco 15655, rubber, buna-n, o-ring, dash #459, eco 15655, rubber, buna-n, o-ring, dash #914, 1.28 dia, 0.12 wall, o-ring, dash #275, o-ring,, dash #159, packing set, twin, sureguard, packing set, twin, square, 1.25 stem, 1.75 od, vldsk2, packing set, single, sureguard xt, maxflo, 3"/4", packing set, twin, sureguard xt, maxflo, 1.50/2", plastic, pin, 3 deg taper, vldsk2, 4", cl 150/300, pin, taper, vldsk2, 10", cl 150/300, plug, maxflo 3, 2", cl 150/300, plug, maxflo 4/3, 3", cl 150/600, seal, grafoil, ribbon, 40" l, seat ret, maxflo 3, 2", cl 150/300, seat ret, maxflo 3, 3", cl 150/300, seat ret, vldsk2, 4", cl 150/300, seat ret, vldsk2, 10", cl 150/300, seat ring, maxflo 3, 2", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, vldsk2, 4", cl 150/300, seat ring, vldsk2, 10", cl 150/300, shaft, maxflo 4/3, 1.50/2", cl 150/600, shaft, maxflo 4/3, 3"/4", cl 150/600, shaft, vldsk2, extd, 4", cl 150/300, shaft, vldsk2, 10", cl 300, flowserve/logix 500 md+(520md+37-w1d300-000-0000), 3200md-28-d6-e-04-40-05-00, valtek lin.act., 25 sq.in with logix500 (actuator set), bare vlv sub asmbly 2",300w, maxflo 3, bare vlv sub asmbly 3",300w, maxflo 3, bare vlv sub asmbly 1.5" 300#, maxflo 3, bare vlv asmbly,p/n:817774.009,flowserve, bgl sphtm;dwgrev: 00;kit, spare part, actuator, size 50, rotary, hd spring, 3.25 stroke, mtl code n/a: se, dwgrev 000-ring, dash #237, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 00bearing, thrust, 1.00 stem, shrstrm, 6/8, a or sa-479-521800, nitronic 60 bar 8-inch centerless gro, dwgrev 000-ring, dash #257, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 6, cl 150/600, inconel 625, work hardened to minimum tensile strength of 195 k, bgl me_fgdwgrev 04bearing, 1.12 stem, shrstrm, 2.00 l, metal, stellite #6 casting r30006 or wrought stellit, dwgrev 01pin, grooved, 0.19 dia, 0.50 l, a or sa-479-520910 xm-19 nitronic 50 strain hardened, up to 2.25 dia, dwgrev 000-ring, ...., dash #244, rubber, viton a, 75/- 5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 3, cl 150/300, inconel 625, work hardened to minimum tensile strength of 195 k, ;dwgrev: 00; kit, spare part, actuator, size 200, rotary, 4 stroke, vr, mti code n/a: see drawing, p.o., or bo, dwgrev 00gasket, spiral, 1.44 x 1.06, 0.12 thick, gasket, spiral wound 316l windings, flexible graphite filler in, dwgrev 000-ring, .., dash #033, rubber, viton a, 75

Central Government/Public Sector

CTN :45505707

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For tender for supply of job work for manufacturing of 15 part reference semfg1079 - investing casting of holder (defence) tip trailing edge block , tip trailing edge block , trailing edge block sta 1-7 , trailing edge block sta 1-7 , trailing edge block i -b , trailing edge block - lh , trailing edge block - lh , trailing edge block o -b -rh , trailing edge block , trailing edge block , trailing edge block , trailing edge block 1 , trailing edge block 2 , trailing edge block 3 , trailing edge block trim tab

Central Government And Public Sector

CTN :45456817

06 Jun, 2026 NA

Patna - Bihar

Tender For corrigendum : drain cleaning, drain repair, slab casting for existing drain& chamber, filling of brick bats, local sand, gsb etc. in water logged area in rainy season or as required, dewatering of water logged/ low land area, repairing and patch work of existing road & pavement and other miscellaneous work in all wards of nagar parishad, masaurhi, patna one years

CTN :45463220

22 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply and work of gm casting - g.m. bearing for top roller (upper half) for w.i.l. as per drawing. 88: 10 : 2 isi/iso standard, g.m. bearing for top roller (lower half) for w.i.l. mill as per drawing. 88: 10 : 2 isi/iso standard, g.m. bearing of t.r.p.f. roller net 88: 10 : 2 isi/iso standard, g.m. bearing of b.m.a. mill for top roller (upper half)as per drawing. isi/iso standard, g.m. bearing for side roller for w.i.l. mill as per drawing. isi/iso standard, g.m. bearing for side roller for b.m.a. mill as per drawing. isi/iso standard, g.m. bearing for b.m.a. mill for top roller (lower half) as per drawing. isi/iso standard, g.m. bearing for transmission gear wil mill. isi/iso standard, g.m. bearing for transmission gear bma mill. isi/iso standard

State Government

CTN :45480615

23 Jun, 2026 7.56 Lacs

Bhopal - Madhya Pradesh

Tender For casting, machining, assembly and providing work of ww90 (for 63mm dia nut) single head stocks for gates of various w.r. divisions.

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

Central Government/Public Sector

CTN :45291308

23 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : tender for supply of investing casting of holder (defence) -osaero job work for manufacturing of 38 parts reference semfg 1000 -01f.1b.0950.019.1ab , 01f.1b.0950.019.2ab , 01f.1b.100m.139.0a0 , 01f.1b.100a.053.0aa , 01f.1b.100a.054.0aa , 01f.1b.101m.003.1a0 , 01f.1b.101m.003.2a0 , 01f.1b.101m.034.0a0 , 01f.1b.101m.035.0a0 , 01f.1b.101m.053.1a0 , 01f.1b.101m.053.2a0 , 01f.1b.101m.155.0a0 , 01f.1b.101m.004.1aa , 01f.1b.101m.004.2aa , 01f.1b.204m.013.0a0 , 01f.1b.475m.001.0aa , 01f.1b.495m.001.0a0 , 01f.1b.964m.004.0a0 , 01f.1c.112m.199.0ab , 01f.1c.113m.004.1aa , 01f.1c.113m.004.2aa , 01f.1c.120m.028.1a0 , 01f.1c.120m.028.2a0 , 01f.1c.120m.029.0a0 , 01f.1c.221m.026.0a0 , 01f.1c.222m.030.1a0 , 01f.1c.222m.030.2a0 , 01f.1c.222m.029.1aa , 01f.1c.222m.029.2aa , 01f.1c.223m.041.0a0 , 01f.1b.952m.003.1ab , 01f.1b.952m.003.2ab , 01f.1c.120m.030.1aa , 01f.1c.120m.030.2aa , 01f.1c.131m.005.1ac , 01f.1c.131m.005.2ac , 01f.1c.228m.006.1aa , 01f.1c.228m.006.2aa

Central Government And Public Sector

CTN :45463083

08 Jun, 2026 8.31 Lacs

Begusarai - Bihar

Tender For name of the scheme:- in ward no. 21, drain and pcc casting work from shivdani singh house to telia pokhar main road and pcc casting work from ratanchand house to das toli road.

Central Government And Public Sector

CTN :45463084

08 Jun, 2026 8.82 Lacs

Begusarai - Bihar

Tender For name of the scheme:- in ward no. 21, soil filling, brick soling, pcc casting and rcc drain construction work from chandrabhushan singh house to vijay singh house.

Central Government And Public Sector

CTN :45463085

08 Jun, 2026 2.83 Lacs

Begusarai - Bihar

Tender For name of the scheme:-soil filling, brick soling and pcc casting work from pcc road to suresh singh house in ward no. 21.

Mobile Home Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors