Latest mobile prefabricated cabin Tenders | Government mobile prefabricated cabin Tenders

Central Government/Public Sector

CTN :43230332

29 Dec, 2025 NA

Delhi - Delhi

Tender For fabrication and supply of material bin

CTN :43164216

02 Jan, 2026 NA

Ernakulam - Kerala

Tender For supply of fabrication of frame with ms square pipe of dimensions 1. 5 inch across 8 ft x 12 ft 1 point 5 inch dia , ms mesh with 1 inch spacing and hard welded to provide access control not more than 1 inch x 1 inch gap , lockable arrangement and doors for emergency exit 4 feet x 7 feet , lockable arrangement on outer side of the barricading material ss 4 feet x 7 feet , painting of the grill in black for avoidance of blind spot for cctv camera a r , installation charges

Central Government/Public Sector

CTN :42587078

24 Dec, 2025 NA

Trichy - Tamil Nadu

Tender For corrigendum : fabrication and supply of headers and vessels for mirzapur and kawali project and transporation of finished goods to respective project site with bhel material osb

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

State Government

CTN :43226273

01 Jan, 2026 NA

Delhi - Delhi

Tender For fabrication rectification and supply of material for erection of support structures for overhauling of critical high pressure valves at pps iii bawana

Central Government/Public Sector

CTN :42533378

19 Dec, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of non standard flanges as per material requisition

Central Government/Public Sector

CTN :43191299

29 Dec, 2025 NA

Golaghat - Assam

Tender For design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of cable ducts and accessories as per material requisition

corporations/Associations/Others

CTN :42721109

30 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

State Government

CTN :42920788

19 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection a

CTN :41752308

30 Dec, 2025 3.10 Crore

Sanganer - Rajasthan

Tender For corrigendum : design, manufacture, testing at manufacturer works, supply, delivery and commissioning of 6 nos. tower material fabrication machines at fabrication store, sanganer, jaipur against tn-1153

Mobile Prefabricated Cabin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government