Get complete information related to latest Modular Switch Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Modular Switch Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Modular Switch Tenders.
Tender For re wiring and replacement of existing defective burned type cable wires switches sockets ceiling fan fan regulators and change the existing electrical switches to modularswitch gear etc at hpsebl field hostel uttrala under baner power house div
Tender For supply of electrical material for day to day maintenance at head quarter, vikas kuteer, dusib. - supplying of 36 watt led panel 2 x 2 luminaries of size 600 mm (length) x 600 mm (width) housing made with white powder coated crca sheet metal and pmma diffuser suitable for operation on 150-265v 1- a.c. supply, having system efficiency 100 luman per watt and colour temperature 6500 k, cri >80 with driver having power factor > 0.90, thd 10% and efficiency > 85% driver should be ic complete, with minimum 2.5 kv surge protection complete as required. with 2 year warrenty mr, supplying of of 20 watt led energy saving batten having polycarbonate housing, colour temperature 6500k, efficiency > 100 lm/watt, suitable to work on 240v, 50hz ac supply, prewired and high efficincy electronic driver as required. (mr) with 1 year warrenty as approved by engineer in charge, supply of electric kettle having 1.5 ltr capacity 1500 watt, stainless steel material, concealed element, having power indicator, automatic cutoff, 360 degree swival base, cool touch handle and lid locking suitable to work on 220v 50hz 1 ac supply as required. mr as approved by engineer in charge, supply of 125 amps. four pole isolator suitable to work on 440 volt ac three phase supply as reqd. mr., supply of 100 amps. four pole isolator suitable to work on 440 volt ac three phase supply as reqd. mr., supply of ceiling fan 1200mm sweep super white colour with 3 nos aluminum baldes and body suitable to work on 220/240 volt, 50hz a.c 1- supply, copper winding, power input 70w, speed 380 rpm, air delivery 210 + 5%, etc as reqd. (mr), supplying of two module stepped type electronic fan regulator suitable to work on 220v 1- 50hz ac supply, 5 steps speed regulation as aproved by engineer in charge with 12 months warrenty. mr high speed 100w., supply of mfd capacitors 2.5 mfd/440v/plww/28x52 having plastic casing/copper wire terminal isi mark suitable to work on 220/240 volt, 50hz a.c 1- supply etc as reqd. (mr), supply of mfd capacitors 3.15 mfd/440v/plww/28x52 having plastic casing/copper wire terminal isi mark suitable to work on 220/240 volt, 50hz a.c 1- supply etc as reqd. (mr), supplying of wire less door bell having tune duration 3 sec, range upto 100 m in open air tunes 25 selectable polyphonic tunes, volume options 3 working radio frequency 433.33 mhz, operated by one pc 12 v 23 a battery( included) suitable to fix on wall as required by engineer in charge. mr, supplying of ding dong door bell having time duration 3 seconds, sound range > 50 m, white colour suitable to fix on wall as required by engineer in charge. mr, supplying of 6a extention board, pvc/metal body, 16a spike guard and having 4 nos 6a socket outlet , one switch with 4 mtr copper wire with power cord 0.75mm(3 core)as required as approved by engineer in charge mr, supplying of food warmer, hot case made of heavy carbon steel body, with toughened glass, fitted with tubular elements, adjustable thermostat and temerature switch ranging upto 150 degree celsius wattage 650-800 watt suitable to work on 230v 50hz ac supply with minimun dimension 63 x 47 x 26 cm (2 layer ) fitted with isi mark heavy duty moulded plug complete as required with 1 year warranty as approved by engineer in charge, supplying of 15/16 a modularswitch, one way, isi marked to be used on the existing modular plate and switch box etc as required, supply of 15/16 amp 3 pin plug top heavy duty isi marked suitable to work on 220/240v , 50hz ac supply single phase etc as required. make mr, supplying of 6 pin 15/16 a modular socket outlet, isi marked to be used on the existing modular plate and switch box etc as required, supply of heat convector with 3 heat setting 600/1200/2000 watts, adjustable thermostat for desirable temperature, cool touch handle for easy mobility, adjustable height. warranty 02 years, etc. as required as approved by engineer in charge, supplying of insulation tape roll 0.125 mm size & length 6.5 mtr long as required(mr
Tender For bid to ras supply of living shelter 40 men c c - ways double door with blanks , residual current circuit breaker with over load and short circuit protection dp 32 amps , modularswitch one way 16 amp 1 module , modular socket 6a 2 3 pin combined 2 module. , modular socket 16a 2 3 pin combined 2 module. , white cover plate with frame 3 module , white cover plate with frame 6 module , metal flush box 3 module , metal flush box 6 module , compact street light luminaire with deep drawn housing complete along with single 36w fr l , pvc casing caping pipe 25mmx16mm confirming to is 14927 , pvc casing caping l bend 25mm confirming to is 371 1979 , pvc casing caping t 25mm for conduit pipe , pvc casing caping elbow 25mm dia , pvc casing caping square box 4 inch x 4 inch , plastic body exhaust fan 250mm sweep with louvers. , plastic body wall mounting fan 450mm sweep. , two tier sleeping bunks as per drawing attached to be provided by vendor , waste bin 120 ltr dim 480 x 550 top o d colour dark brown , plastic chair with handrest model dynasty dim 570 w x 593d x 890h. colour dark brown , cup board model freedom fmdr 1b dim 595 w x 354d x 1450 h colour dark brown , looking mirror 1200x750x3 5mm thick with plastic decorative frame , prefabricated gel earthing electrode of pipe in pipe technology , gi pipe 100 mm dia medium grade as per is specification , back fill compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip 25 x3 mm x 9m , iron spikes 16 inch long complete as directed and specified by buyer , gi strip 32 x 6mm of length 3m , gi nipple 20 mm dia and 10 cm long is 1879 , gi reducer socket 40 x20mm isi marked , lightning air terminal a copper tube 150 cm long x 25 mm dia with five copper prongs of length 15cm each , ms clamp 25 x 3mm with nut and bolt complete , gi wire 12 gauge conforming to is 2062 1991 , earth augur one per five lc , pvc pipe 3m long 6 inch dia , user manual , tester set meger for carrying out serviceability check along with manual one per five lc , gi pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia welded with ms plate of size 100mm x 100mm x 4mm thick with 04 nos . , gi pipe 40 mm bore 2m long as per is 1239 , 50 mm bore gi pipe sleeve , crystaline conductive mixture ccm , fire extinguisher of capacity 2 kgs along with its accessories , heating device kerosene based heating device of following specifications will be provided with each shelter
Tender For maintenance of e.i in rb at chandigarh.(providing lawn lights in house no. 68 (type-dmh) sector-7, chandigarh. (e.i. wrok). - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modularswitch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required., group b, dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modularswitch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modularswitch, connections etc. as required., dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no. 2.16 supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., dsr item no. 8.9.5led batten light (system lumen efficacy 105 120 lm/watt)supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, (as per complete item no. 10 of the dnit)., 18- 22 watt, supply and erection of b.l. holder of make anchor panta / havells reo/ gold medal essenza isi marked on existing jn. box / wooden block including making connection etc as required., s/e of led bulk head luminaries weather proof frosted light with pmma / pc reflector and silicon gasket to be installed on surface. the led fitting should have minimum system lumen output minimum 1000 lumen and the driver of the fitting should be workable on 140-260 volt. (as per complete item no. 12 of the dnit)., supply & laying of pvc copper wire 1.5mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of engineer-in-charge. the copper wire should be of polycab/ l&t/ havells/ finolex/ r.r. kables make only., supply & erection of fresh air fan high speed motor with copper wound 10 sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of havells make ventiliar dx white / orient make ventilator / crompton make brisk air/ bajaj make 70049 250mm sweep only. (as per complete item no. 14 of the dnit)., s/e of led 8w/ 9 w. bollard fitting. the bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. the bollard should be made out of extruded aluminium profile and die cast aluminium base with pmma/ opal diffuser bollard painted with superior quality of paint. (as per complet
Tender For bid to ras bid to ras tender for supply of led tube light 4 ft long , heat pillar rod 1500 w , gas and electric heater rod , socket 6 amp modular , switch 6 amp modular , 6 modular sheet with frame , 2 modular sheet with frame , 1 modular sheet with frame , 6 amp switch , 6 amp socket , ss combined 16 amp , ss combined 06 amp , pvc board with cutting 1by1 , pvc board with cutting 2by1 , pvc board with cutting 3by1 , pvc board with cutting 4by1 , pvc board with cutting 6by1 , bulb holder , wire 1 sqmm 90 mtr red and black , wire 1point 5 sqmm 90 mtr red and black , wire 2pont5 sqmm 90 mtr red and black , wire 4 sqmm 90 mtr red and black , service wire 6 sqmm 90 mtr , 2point 5 sqmm cable 3 core 90 mtr , insulation tape , led bulb 12 w , led bulb 9w , kit kat fuse 100 amp , mcb 10 amp , mcb 16 amp , mcb 32 amp , dp mcb 40 amp , dp mcb 63 amp , half watt colour bulb green , half watt colour bulb red , half watt colour bul blue , half watt colour bulb yellow , fuse wire 300 amp , 3 pin top 16 amp , 3 pin top 06 amp , drill machine ac , drill machine dc , change over switch 200 amp , exhaust fan plastic 9 inch , cable wire 4 core 90 mtr , aluminum staires 6 stps , nose plier , casing caping 25 by 16 mm , casing caping 35 by 20 mm , gitti , mcb box 8 way , machine screw 1 inch , machine screw 1 point 5 inch , calling bell for office wirless , drill bit 6 point 5 mm , calling bell switch , hinges 3 inch , hinges 4 inch , tower bolt 4 inch , tower bolt 6 inch , door handle 6 inch , star screw black 1 inch , star screw black 1 point 5 inch , wooden screw 1 point 5 inch , wooden cutting plade 4 inch , pvc tee 2 inch , pvc socket 2 inch , pvc elbow 2 inch , wc seat cover , gi hook , window glass 18 and 3 by 4 inch into 37 and 3 by 4 inch , window glass 15 and 3 by 4 inch into 37 and 3 by 4 inch , sliding bolt , door closer , white paint
Tender For e.i for setting up of work station system in the audit branch of administrative office in p.u campus, sector-14, chandigarh - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls/hffr pvc insulated copper conductor single core cable etc. as required (dsr 1.8), group c (dsr 1.8.3), rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable and 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required (dsr 1.15), group c (dsr 1.15.3), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.17), 3 x 2.5 sq. mm (dsr 1.17.12), 3 x 4 sq. mm (dsr 1.17.21), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.21), 25mm (dsr 1.21.2), supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required (dsr 1.22), 75 mm x 75 mm x 60 mm deep (dsr 1.22.1), supplying and fixing following modularswitch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (dsr 1.24), 5/6 a switch (dsr 1.24.1), 3 pin 5/6 a socket outlet (dsr 1.24.4), supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. (dsr 1.28), 3 module (dsr 1.28.2), 6 module (dsr 1.28.4), 8 module (dsr 1.28.5), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modularswitch, connections etc. as required (dsr 1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modularswitch, connections etc. as required (dsr 1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (dsr 2.4), 4 way (4 + 12), double door (dsr 2.4.1), supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.(dsr 2.10), single pole (dsr 2.10.1), supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required. (dsr 2.16, providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (dsr 5.18), supplying, drawing, installation, testing and commissioning of cat6a utp 4 pair, 23 awg solid copper cable in existing conduit/ on surface, u/ftp, lszh, non-plenum, horizontal (solid) cable suitable for high speed data networking application supporting upto 10gbps over a 100 meter channel. the 4 unshielded twisted pairs (utp) cable with color coded insulation for easy indentification should have flame properties i.e. flammability test - iec 60332-1, smoke density - iec 61034, lszh standards compliance: ansi/tia- 568 c.2, iso/iec 11801
Tender For corrigendum : supply of sitc of power and network arrangement : -sitc of 12u wall mount rack , sitc of 24 port loaded patch panel , sitc of 24 port l2 smart network switch , sitc of 24 port l3 smart network switch , supplying and fixing of 1 gbps sfp module , sitc of information outlet cat 6 , 1 meter patch cord , 2 meter patch cord , supplying and laying of the cat 6 cable as per scope , sitc of 6 core fiber optic cable , sitc of 12 port liu , sitc of fiber optic patch cord , sitc of projector , sitc of projector screen , modularswitch socket , complete wiring with 1.5 sqmm , complete wiring with 10 sqmm , spn mcb db , 06 amp single pole mcb , 40 amp double pole mcb , 63 amp double pole mcb , 63 amp four pole mcb