Latest modular cupboard Tenders | Government modular cupboard Tenders

CTN :40703166

07 Jul, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of commercial or mr plywood is 303 grade 8ft x 4ft x 4 mm , commercial mr plywood is 303 grade plywood 8ft x 4ft x 6 mm , commercial mr plywood is 303 grade 8ft x 4ft x 12 mm , commercial or mr plywood is 303 grade 8ft x 4ft x 18 mm , commercial or mr plywood is 303 grade 9ft x 6ft x 12 mm , waterproof or bwr plywood is 303 grade 7ft x3ftx12mm , commercial or bwr plywood is 303 grade 7ft x4ftx12mm , sunmica size 4ftx8ftx 1mm wood colour , sunmica size 4ftx8ftx 1mm black colour , sunmica size 4ftx8ft x 1mm white colour , 2nd class well seasoned hard wood scanting of size 1.5inch x 4inch x 7ft long , 2nd class well seasoned hard wood scanting of size 3inch x 2inch x 7ft long , 2nd class well seasoned hard wood scanting of size 2inchx3inch x12ft long , 2nd class well seasoned hard wood scanting of size 3inchx3inch x12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1.5inch x 12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1inch x 12ft long , 2nd class well seasoned hard wood scantling of size 4inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx4inchx12ft long , pre laminated particle board 8ft x 4ft x12 mm , pre laminated particle board 8ft x4ft x18mm , hard wood beeding 1.5inch x 0.50inch , moulded wood beeding 20 mm x 8 mm , pvc edge band tape 0.5 inch thick , pvc edge band tape 0.75 inch thick , countersunk flat head screw 0.50 length for acp panelling , countersunk flat head screw 1inch length for acp panelling , 3 m double sided tape , pvc gitti white 25 nos per box , silicone sealant for acp sheets , alumunium groove cutting blade 10 cm dia , masking tape 1inch width , drill bit 2mm for iron , drill bit 3mm for iron , drill bit 4mm for iron , drill bit 5mm for iron , drill bit 6mm for iron , screw driver 12inch , screw driver set star type , half chizel , hammer ball pin 400 gm , claw hammer 510 gm , iron wood planner 18inch , bosch 4inch 670 w angular grinder , carpenter edge 1.25 kg , bench vice 4inchx 8inch , wood work vice 7ft long , g clamp , hammering concrete bit 4 mm , hammering concrete bit 5 mm , hammering concrete bit 6 mm , hammering concrete bit 8 mm , hammering concrete bit 10 mm , hammering concrete bit 12 mm , blade 7inch for bosch eco circular saw blade gks 190 , blade tct circular 7inch dia circular saw blade for acrylic sheet cutting , 10inch dia circular saw blade , star screw driver kit , steel allen key set , hex driver power drill socket for self driven screw , check nut for sd screw , ibell gasoline chainsaw 56 cc magnesium alloy crank case 18inch guide bar length with chain , blade grinders essential machine , grinding wheel for blade grinder , bh2 screw dirver plus and minus bit , triangular file 4inch , half round file 12inch , right angle 12inch , steel measuring tape 3 m length , steel measuring tape 5 m length , steel measuring tape 15 m length , ft30 fiberglass top line measuring tape 30mtr , heatex , vacum handle for glass , bush for table dsize //bid details 2 / 50

Central Government/Public Sector

CTN :40449501

10 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : supply of packing case in jungle wood as per hmt standard

CTN :40922290

22 Jul, 2025 NA

Chandigarh - Chandigarh

Tender For tender for supply of cloth hanger , towel hanger , soap case hanger for bathroom , dustbin small as per spcn , dustbin big as per spcn , bucket plastic as per spcn , mug , split ac as per spcn , desert cooler as per spcn , led tv big size , hot & cold water dispenser as per spcn , deep freezer as per spcn , fridge 192 ltr , meat cutting wood , chimney , insect killer , mirror as per spcn , water purifier as per spcn , photocopier machine as per spcn , tool box set , led tv big size as per spcn , dressing table , electric iron , bucket gi , cup & saucer , borosil glass medium as per spcn , aluminium degchi with lid as per spcn , aluminium degchi with lid as per spcn , aluminium degchi with lid as per spcn , aluminium degchi with lid as per spcn , aluminium degchi with lid as per spcn , eagle flask as per spcn , jug steel as per spcn , kadhai iron as per spcn , knife for cook as per spcn , lpg stove double burner , lpg pipe , spice container steel , meat chopper with handle , mixer grinder , paarataluminium as per spcn , pressure cooker as per spcn , pressure cooker as per spcn , aluminum rice stainer , tawa large size as per spcn , tea kettle steel as per spcn , chamcha as per spcn , chamcha as per spcn , steel food warmer as per spcn , chapati maker , tea kettle steel as per spcn , tea stainer

CTN :40916855

03 Jul, 2025 40.00 Lacs

Jalandhar - Punjab

Tender For supply of almimirah steel large , almirah steel medium , chair dinning fd 279 , chair dining fd map ii 04 , sofa set 5 seater with cushion , table peg , table centre , table bed side , table computer , bed hard steel 1800 x 900 x 2100 mm , chair verandah , table office clerk steel , table dinning 3x3 steel , table dressing ladies incl stool , chair auditorium , table steel 3x2 with drawer , book case lp steel , charpoy iron frame ply top , prelaminated particle boards from wood and other lignocellulosic material (v2) as per is 12823 (q3)

Central Government/Public Sector

CTN :40228999

02 Jul, 2025 NA

Ernakulam - Kerala

Tender For bid to ras supply of nbcd items - splinter box 250x250x127 mm , shore steel adjustabletelescopic 0 point 4m to 0 point 6m , shore steel adjustabletelescope 1 point 0 m to 1 point 7m , dc patrol bag , timbershore soft wood him season 150x150x3000 mm , timbershore soft wood him season 100x100x3000 mm , woodenmallet medium is 2922 , hard wood wedge nhq dmecnal244 , wedge soft wood 100x25x25mm thick nhqncd 1306 04 , plug sq tapered soft wood 300 x 150 x 100mm , plug sq tapered soft wood 150mm x 50mm x 25mm nhq ncd 1305 06 , staple steel clamp round 255 mm ,staple steel clamp round 150mm , gloves for fire fightersuit , tape measuring steel 15 mtr in metalic case is 9293 ,set of spanners size d10 sland 11 12 sland 14 16 sland 1719 sland 24 , spanner wheel 305 mm af , non adjustableflat haksaw framed 250 is 5169 , drill bit set 3mm to 12mm , spanner adjustable 200mm , insulation tape 25mm ,fibre glass cloth 0 point 5 mm thick 1m width , battery dry1 point 5v , jubilee clip 30 mm

CTN :40886715

18 Jul, 2025 40.00 Lacs

Kargil - Jammu And Kashmir

Tender For construction at dard cultural centre - coffee table book 9 by 12 inch glossy finish , pamphlet a5 120 to 170 gsm gloss paper , video display panel 55 inches 4k resolution support various content types , flex boards 6ft by 21 by 2ft for promotion , vinyl display boards , mural 50 sqft , clay model 18 by 24 inch , a 10 min to 15 min documentary on dard aryans , animal and human sculpture 3 ft by 2 ft , plough , ladakhi blanket , traditional dress of brokpa , mani wheel , goncha traditional teapot , dongmo butter churner , langchak wooden ladle , zama wooden bowl , tibetan butter lamp , zems , baloz , allow , schaksma , mechay , akta , sheley , kurtineey , kho , peela , hal , full , tuktsey , shalba , panka , buee , harongs , fig , tharinyee , fafer , choktsey , show case for display of artifact with solid wood frame glass on top and front side , wiring of buildings size 61m by 21m , switch and fitting of electric points , consultation and research wk fee 1 percent of overall cost , construction of bdy wall height of concrete wall 3 ft thickness 18 inchs and steel railing over the wall 3 ft , construction of main gate height 9 ft width 12 ft , beautification of outer area 2 mannequins in traditional aryan valley dress 06 cut outs and flower pots , open air amphitheatre size 30 by 30m , provision of tin shed for staired seating area 20m by 2m , selfie board 8 by 8 feet , three seater benches steel , iron railing grill , raised platform 4m by 4m for selfie pt , conveniences for visitors , provisioning of wooden show cases 65 by 33 inch with glass door , paneling of sale counter 100 sqft wooden frame with glass , book shelves 65 by 33 inch for library setup , wiring and fitting of lights 15.8ft by 9.9ft , lib wooden table 48 by 96 inch , chair wooden , books for library

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862068

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 04/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 02 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862072

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862073

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 08/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 06 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

Modular Cupboard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector