Get complete information related to latest Modular Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Modular Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Modular Plate Tenders.
Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.
Tender For maintenance of electrical installation & fans repair maintenance of pump set and diesel generator set at cpwd office complex and residential colony at bamunimaidan & japorijog. (sh: supplying of iei including switch socket, modularplates, led light, downlighter, post top, flood light, bldc fan, mcb, laying & fixing of cables etc)subwork/packages:supplying of iei including switch socket, modularplates, led light, downlighter, post top, flood light, bldc fan, mcb, laying & fixing of cables etc
Tender For bid to ras supply of miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , electrical plugs (v2) isi marked to is 1293 (q2) , led batten light (led tube light) (v2) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , water storage tank , plywood bwr , led tube , copper cable , wire mesh , hydraulic door closer , cable , plywood bwr , whb , led batten , power contactor , db mcb tpn , wire mesh , particle board , flat back urinals , ewc , cpvc sdr , curtain rod alu , cable pvc , looking mirror , isolator 4 pole100 amps , fan regulator , tower bolt alu , led mirror light , helical door spring , db mcb spn , bow handle , ply wood bwr , sheet aluminium , sliding door bolt , wire mesh pvc , butt hinges , m seal , led lamp , cpvc tank adaptor , screw wood , door stopper aluminum , door handle , cpvc female brass threaded , capacitor , metal clad ac box , modular socket 20 ampr , curtain rod brackets aluminum , switch socket combination , sliding door bolt alu 300 mm , tower bolt alu 100 mm , hasp and stapple alu , screw wood 50 x 8 g , butt hinges alu 75 mm , bracket ci for flat back urinal , butt hinges ms 50 mm , modular socket 10 amps , tower bolt alu 75 mm , teak wood beading , tower bolt alu 200 mm , mortice lock 6 levers left , bow handle alu 100 mm , fevicol , butt hinges alu 125 mm , cpvc brass elbow , screw wood 35 x 6 g , butt hinges ms 100 mm , modular switch 10 amps , cpvc brass reducer elbow , cpvc brass tee , call bell ding dong , cpvc adaptor , nails wire round 50 mm , nails wire round 75 mm , modular switch 20 amps , rubber washer , syphon washer pvc , modularplate 8 module , plug top 3 pin 15 amps , hasp and staple , modularplate 3 module , modularplate 12 module , angle holder , modularplate 6 module , cpvc adaptor 25mm female , screw wood , metal clad ac plug , lugs aluminium , screw wood 25 x 8 g , cpvc adaptor 25mm male , cpvc adaptor male 20 mm , cpvc female adaptor 20 mm , screw wood 40 x 8 g , switch bell push , lugs aluminium 240 sqmm , lugs aluminium 300 sqmm , plug dummy gi 20 mm , insulation tape20 mm , lugs aluminium 150 sqmm , lugs aluminium 120 sqmm , lugs aluminium 70 sqmm , lugs aluminium 95 sqmm , flexible conduict pipe 25 mm , lugs aluminium 50 sqmm , lugs aluminium 25 sqmm , lugs aluminium 35 sqmm , lugs aluminium 16 sqmm , xlpe cable water storage tank 1000 ltr cap, plywood bwr 8 ft x 4 ft x 12 mm per sheet 2.88 sqmtr , led tube for t8 fittings 20 watts aluminium body, water storage tank 500 ltr cap, plywood bwr 8 ft x 4 ft x 18 or 19 mm , led tube for t5 fittings 18 watt aluminium body, 3 core copper round cable 2.5 sqmm 100 mtrs coil, wire mesh aluminium 0.9 or 1 mtr x 15 mtr 0.45mm, ss plate rack trade patern size width 900 mmx length 750 x 250 mm , hydraulic door closer left and //bid details 2 / 122
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, bobrm1, bcnm1,boxnhl bvzc, bobrnel & boxnr wagons no as following: [1] scr 10099663802 boxnm1 [2] er 72029662187 bobrnm1 [3] er 72029960313 bobrm1 [4] cr 30019060122 bcnm1 [5] nwr 22111111109 boxnhl [6] scr 85099560413 bvzc [7] ser 85079560471 bvzc [8] ser 10079666892 boxnm1 [9] er 72029760012 bobrnel [10] ser 10079665581 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (112.90 mt) is the lot quantity (112.90 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, bcnm1,boxnhl & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1, bobrm1 & bobrnel : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bvzc wagon : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr, boxnlw, bcnm1 & bobrnmi wagons no as following: [1] scr 10099523700 boxnm1 [2] scr 25099661369 boxnr [3] secr 14140762292 boxnlw [4] scr 30099186132 bcnm1 [5] ser 10079666083 boxnm1 [6] er 72029563392 bobrnm1 [7] scr 10099660689 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (79.190 mt) is the lot quantity (79.190 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr, boxnlw & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl. no 04 fitted with casnub bogie 22w(m) which is to be sold with wagon.
Tender For supply of rewiring for light point fan point exhaust fan point call bell point , supplying and fixing of following sizes of steel conduit along with accessories in surface , supplying and drawing 3x13 sq mm of frls pvc insulated copper conductor , supplying and drawing 3x4 of frls pvc insulated copper conductor, single core cable , supplying and fixing 5or6 modular switch socket on the existing modularplate , supplying and fixing 3 pin 5 or 6 socket outlet modular switch socket on the existing modularplate , supplying and fixing 6 pin 15 or 16 modular socket outlest switch socket on the existing modularplate , bell push , supplying and fixing 12 module 200mmx150 mm size modules gl box alongwith modular base , supplying and fixing 6 module 200mmx75 mm size modules gl box alongwith modular base , supplying and fixing call bell buzzer suitable for single phase 230v , supplying and fixing modular blanking plate on the existing modularplate , supplying and fixing suitable size gl box with modularplate and cover , power coated die cast or extruded aluminium body 36 watt , sitc of wall mounted led batten mirror light 600 mm long , supply installation of suspended type recessed orsurface mounted led 4x1 lumanaire , supplying and fixing 63a rating double pole 240 v isolator in the existing mcb db complete , supplying and fixing of one number pvc insulated and pvc sheathed xlpe power cable