Latest modular table Tenders | Government modular table Tenders

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40493844

10 Jun, 2025 NA

Delhi - Delhi

Tender For supply of revolving chair (v4) (q2) ( pac only ) , modular table / meeting table / centre table (v2) (q2) ( pac only )

State Government

CTN :40493884

10 Jun, 2025 NA

Delhi - Delhi

Tender For supply of revolving chair (v4) (q2) ( pac only ) , office chair (v3) (q2) ( pac only ) , modular table / meeting table / centre table (v2) (q2) ( pac only ) , composite office tables confirming to is 8126 (v2) (q2) ( pac only ) , cafeteria chair (q2) ( pac only ) , steel clothes lockers (v3) confirming to is 3314 (q2) ( pac only ) , steel shelving cabinets (adjustable type) confirming to is 3312 (v3) (q2) ( pac only )

State Government

CTN :40227801

10 Jun, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

Central Government/Public Sector

CTN :40478626

16 Jun, 2025 NA

Jamnagar - Gujarat

Tender For supply of upgradation of district commander office at cgdhq - sofa32 seater with centime table , sofa 2 plus1 seater for visitor,guests at secretariate , book shelf teak wood 01 no 7,5 feet , magazine rackteak wood 01 no , aquarium with stand , carpeting of floor , side wall depiction of maritime theme , lamination of side doors , window blinds , name board at entrance of commander officer depicting commander coast guard district no 15 , upgradation of 02 successor board01 of commanding officer icgs okha,01 commander coast guard district no15 , brass flower pots with natural indoor plants , t flag stands , porgo flooring of enhance area

Central Government/Public Sector

CTN :40273829

02 Jun, 2025 18.00 Lacs

Ezhimala - Kerala

Tender For corrigendum : procurement of furniture for swimming pool, gymnasium, sport facilities and cafeteria as part of infrastructure augmentation at ina, ezhimala nap phase-ii - schedule a part-i(wooden furniture), hat stand with mirror (drawing no. fd-233), notice board 1200mmx900mm(fd-01m), teapoy (drawing no. fd-278), amirh mess utencil (drawing no. fd-93)., drain board and plate rack ( drawing no. fd-48(m))., table pantry ( drawing no. fd-295)., table serving 6 x 3 ( drawing no. wd/ezh/01)., news paper stand ( drawing no. pma(k)/gp-6/08)., mirror full size with teak wood frame (drawing no. pma(k)/gp1/hw/10)., peg set of 3 ( drawing no. fd-80(m)), key board ( drawing no. fd-101m)., sub total of schedule a part-i (wooden furniture), schedule a part-ii( steel furniture), stool revolving adjustable steel ( drawing no. fd-1026)., almirah steel medium ( drawing no.pma(k)/ gp1/steel/02)., almirah large steel with shelves (drawing no. fd-1031), complaint box (drawing no. fd-105m), desk stand lecture (drawing no. fd-1022), trolly hot food electrical (drawing no. fd-133), receptacle pvc (dust bin) (drawing no.fd/e6/map/13/oma), recoreded metal filing cabinet 4 drawers (drawing no. fd-397), table office clerk steel (drawing no. fd-84), ladder aluminium (drawing no. fd-1025), rack steel adjustable with shelves (drawing no. fd-106m), rack side with tray 3 space (drawing no. fd-1023), self supporting extension ladder aluminium (drawing no. fd-115), sub total of schedule a part-ii (steel furniture)

Central Government/Public Sector

CTN :40491139

09 Jun, 2025 2.39 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of high back revolving chair , 1200x 600 mm mild steel frame table , computer table with key board tray , cantilever visitor chair with arms and backrest , plastic cafeteria chair with backrest , wooden side table , large steel shelving cabinet almirah , large steel shelving rack , hot cold normal water dispenser , two shelve stainless steel trolley

Central Government/Public Sector

CTN :40293247

06 Jun, 2025 NA

Bagewadi - Karnataka

Tender For corrigendum : supply of waiting area / airport terminal / public place / reception area chair or seat (v2) (q2) ( pac only ) , modular table / meeting table / centre table (v2) (q2) ( pac only ) , revolving chair (v4) (q2) ( pac only )

corporations/Associations/Others

CTN :40197447

12 Jun, 2025 1.64 Lacs

Parichha - Uttar Pradesh

Tender For corrigendum : supply of furniture for rooms of plant main gate and offices of various divisions of ptpp, parichha. - executive revolving chair mesh mid back ergonomic office chair/study chair/revolving chair/computer chair for work from home metal base seat height adjustable, executive table with glass top of top size 6x3 feet., wooden side rack of front size 2x3 feet, office almirah of front size 3x6 feet, plastic durable chair for home & office rose brown plastic cafeteria chair plastic cafeteria chair, wooden rack of front size 3x5 feet, three seater waiting area chair/bench , solid chair for offices(mild steel, iron, silver), executive table with glass top of top size 4 x 3 feet, computer table of size 4x2 feet, large table mica top for placing communication equipments top size 8"x4" feet, executive chair type: - fixed type non-revolving with arm restseat height: - 450 mm (fixed)effective seat depth: 420 to 430 mmseat width: 450 mmslop of seat in backward: 0- 6 degreecentre height of back rest: 250-260mmvertical height of back rest: 420-450 mmback rest range: 95-105 degree, office chair specification-synchro mechanism the 360 swivel along with knee tilt synchro mechanism with three different tilt positions, supports healthy body movements and gives great back support. unique back. the back of the cross chair is a combination of both mesh cushion offering the perfect balance between form, functionality and comfort. adjustable armrest. the chair comes with height adjustable arms for perfect support, to adjust as per individual body size. adjusting the height of arms as desired will make it sier for users to keep their shoulders in a neutral posture. by adjusting arm height users can move closer to their work surface and still make effective use of the backrest. synchro mechanism. the 360 swivel along with knee tilt synchro mechanism with different tilt positions, supports healthy body movements and gives great back support. unique back. the back of the cross chair is a combination of both mesh and cushion offering the perfect balance between form, functionality and comfort. adjustable arm the chair comes with height adjustable arms for perfect support, to adjust as per individual body size. adjusting the height of arms as desired, will make it easier for users to keep their shoulders in a neutral posture. by adjusting arm height user can move closer to their work surface and still make effective use of the backrest

State Government

CTN :40493679

06 Jun, 2025 NA

Chandigarh - Chandigarh

Tender For supply of modular table / meeting table / centre table (v2) (q2)

Modular Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors