Latest moisture removal system Tenders | Government moisture removal system Tenders

Central Government / Public Sector

CTN :45195836

18 Jun, 2026 NA

Begusarai - Bihar

Tender For corrigendum : supply of line item 10: flameproof oil moisture removal system

Central Government And Public Sector

CTN :45455009

26 Jun, 2026 NA

Lumding - Assam

Tender For supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45406504

26 Jun, 2026 NA

Lumding - Assam

Tender For corrigendum : supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]

CTN :45454289

17 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45395901

30 Jun, 2026 NA

Valsad - Gujarat

Tender For supply of zero toe load fastening system(ztlf) for h beam sleepers for bg 60 kg rails as per rdso drawing no. t-8759 to t-8765. 1 set of fastening consists of 02 nos. of rail pad with embedded steel plate (t-8761), 02 nos. of special cast liner (inner) for 60 kg uic rail (t-8762) 02 nos. special cast liner (outer) for 60 kg uic rail (t-8763) galvanized erc mk-v (t-5919) [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45338205

23 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of secondary brake beam for bmbs suitable to the "knorr bremse make" brake system conforming to rdso spec no. wd-23-bmbs-2008, rev. 1 with amend.1 of sept 2016 to rdso drg no : wd-08093-s/2, item-2, alt : 3. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45339134

04 Jun, 2026 NA

Multi City - Multi State

Tender For supply of overhauling kit for poh of casnub bogie having kbi make bmbs system confirming rdso spec. no. wd-23-bmbs-2008 rev-1 of amend 1 of sept. 2016 and drg. no. wd-08093-s-02, alt. 3 (one kit contains following 15 items) 1). pin: kbi part no. c162088 =4 nos, 2).pin: kbi part no. c162086 =4 nos,3). pin: kbi part no. c162087 =4 nos, 4). pin: kbi part no. 778111 =4 nos 5). pin kbi part no. 778112 =8 nos, 6). washer: kbi part no. 778084 =4 nos, 7). washer: kbi part no. c162641 =8 nos, 8). washer: kbi part no. c162060 =4 nos, 9). dowel sleeve kbi part no. c140446 =4 nos, 10). bush kbi part no. c140445 =4 nos, 11). split pin with washer: kbi part no. 476858 =16 nos, 12). bulb cotter: kbi part no. c162098 =12 nos, 13). apd for push rod suitable for kbi make bmbs =4 nos, 14). apd for primary and secondary brake beam suitable for kbi make bmbs = 8 nos. 15). anti drop plate (z-apd) as per drawing no. kp1981443=4 nos. accepted description: - overhauling kit for poh of casnub bogie "suitable for knorr design bmbs" confirming to rdso spec.no. wd-23-bmbs-2008 rev-1 of amend 1 of sept. 2016 and rdso drg. no. wd-08093-s-02, alt. 3 (one kit contains following 15 items) [ warranty period: 30 months after the date of delivery ] ]

CTN :45136781

08 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of set of apd for escort make bmbs system as per attached drg no. bknws/2023/02 , 1 set consist offollowing items 1. apd for brake cylinder= 1 nos , 2. apd for bell crank and push rod=2 nos, 3. apd for pin bell crank lever= 1 nos, 4 apd for pin push rod and secondary beam=2 nos, 5 apd for brake head pin with split pin=4 nos [ warranty period: 30 months after the date of delivery ] ]

CTN :45037648

02 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of e-beam irradiated single core stranded cable with copper conductors of size 1.5 sq.mm conforming to rdso specification no.elrs/spec/elc/0019 (rev.4) of february 2018 .( note :color of the cable shall be supplied in red and black in equal quantities) for fsds system. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45265328

09 Jun, 2026 NA

Amravati - Maharashtra

Tender For supply of set of apd for escort make bmbs system as per drg no. bknws/2023/02 1 set consist offollowing items 1.apd for brake cylinder= 1 nos 2.apd for bell crank and push rod=2 nos. 3. apd for pin bell crank lever= 1 nos 4 apd for pin push rod and secondary beam=2 nos 5 apd for brake head pin with split pin=4 nos [ warranty period: 30 months after the date of delivery ] ]

Moisture Removal System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector