Tender For supply of transformer oil testing kit (bdv) 1 kva/0-100 kv range motorized cum manual type (digital) for measuring break down voltage /dielectric strength of insulating oil used in transformer/other switchgears with complete accessories( test equipment, oil test vessel with mushroom electrode assembly, 2.5 mm go-no-go gauge, main ac cable of suitable length. user manual with test and warranty certificates) .technical specification as : input power ac 220-250 v/50 hz, output: 0-100 kv ac, trip current: max10-20 ma, operating temp: 10 to 50 degree centigrade humidity:<75% non considering, o/p voltage resolution: 0.1 kv, accuracy: +2% with digital display.
Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the
Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - electrical, on site testing service of electrical equipments with necessary consumable item supply; transformer oil bdv test lt ht breaker testing earth pit resis..
Tender For supply of supply of sitc of 600 cfm air compressor at bangalore lpg plant : : - 600 cfm oil lubricated air cooled vfd air compressor with working pressure between 8-8.5 bar as per tender terms and conditions , supply of suitable refrigerated air dryer to deliver 0 deg c pdp as per tender terms and conditions , supply of pre-filters with required capacity to filter up to 1-micron as per tender terms and conditions , supply of fine-filters with required capacity to filter up to 0.01-micron as per tender terms and conditions , installation, testing and commissioning of air compressor along with the associated equipment as per tender terms and conditions
Tender For machinery and equipment of electrician trade - schedule 1, discrete component trainer, linear i.c. trainer, digital i.c. trainer, electrical machine trainer , schedule 2, a. electric induction plate, b. electric kettle, c. electric iron, d. immersion heater, e. a.c. ceiling fan and ac table fan, f. geyser (storage type), g. mixture & grinder, h. washing machine semi-automatic, i. motor pump set, voltage stabilizer, inverter with battery, schedule 3, current transformer, potential transformer, dc series motor coupled with spring balance load, dc shunt motor, dc compound motor with starter and switch, ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., ac phase-wound slip ring motor with starter switch, universal motor with starter/switch, synchronous motor with accessories like starter, excitation arrangements., thyristor /igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor/igbt controlled a.c. motor drive with, single phase transformer, core type, air cooled, three phase transformer, shell type oil cooled with delta/ star, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, ceiling fan coil winding machine, stepper motor with digital controller, shaded pole motor, schedule 4, dc power supply, solar panel with battery, smart meter, ev charger, ev charger (home), battery charger, schedule 5, oil testing kit, primary current injection set, schedule 6, d.c. shunt generator with control panel, motor-generator (ac to dc), d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bedplate, fixing bolts, foundation bolts and flexible coupling., diesel generator set with changeover switch, over current breaker and water/ air-cooled with armature, star-delta connections ac 3 phase