Get complete information related to latest Molasses Pump Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Molasses Pump Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Molasses Pump Tenders.
Tender For supply, installation, testing and commissioning of submersible pump set with allied e/m equipment for 4nos. tube wells in z block harkesh nagar no.1, mcd school, no.1 sanjay colony harkesh nagar, lokender g block harkesh nagar and z-18 harkesh nagar under tughlakabad constituency ac-52.
Tender For repairing and overhauling of pump set no. 2 ( capacity- 270 m3/hr, head- 20 m, 980 rpm, make- wilo mather and platt, type cne 4 ac pump, model no-81268599/30/1 ) and allied works at raw water intake pumping station for 9mld wtp pujali
Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t
Tender For corrigendum : procurement of oil module and its mandatory spares for 1x800 mw yamunanagar project - motor terminal block ac aop motor , motor terminal block for ac jop motor , motor terminal block for ac ove motor , "motor terminal block for dc eop motor (1 set = 2 nos.)" , "motor terminal block for dc jop motor (1 set = 2 nos.)" , "space heater for ac aop motor (1 set = 2 nos.)" , "space heater for ac jop motor (1 set = 2 nos.)" , "space heater for ac ove motor (if not applicable then space heater for acjop to be provided) (1 set = 2 nos.) " , "space heater for dc eop motor (1 set = 2 nos.)" , "space heater for dc jop motor (1 set = 2 nos.)" , bearings for motor for lube oil pump (aop) , bearings for motor for acjop , bearings for oil vapour exhauster motor , bearings (de and nde) for dc eop motor , bearings (de and nde) for dc liop motor , carbon brushes for dc eop motor , carbon brushes for dc jop motor , brush assemblies for dc eop motor , brush assemblies for dc jop motor , ac motor for lube oil pump (aop) , ac motor for lifting oil pump (jop) , oil vapour exhauster motor , dc eop motor , dc liop motor , lube oil tcv actuator , lt for oil module –m(850-1750 mm) , pressure switch index-d (0.5 - 10 bar) , dp transmitter lube oil filter , rtd (0 to 100°c) for oil module , level gauge for oil module , local gauges (0-10 bar) -oil module , local gauges (0-400 bar) -oil module , pressure gauge ((-)120-0 mbar) -oil module , temperature indicator (0-100 degc) , pr. transmitter range (0-250 bar)-oil mod , pr. transmitter range (0-6 bar)-oil mod , pr. transmitter range (0-(-120) mbar)-oil mod
Tender For procurement of different eot cranes accessories, electrical changeover switch for emd-iii and spare parts of hoist and crane for emd-ii etps htps kasimpur - down shop lead (dsl) 125 a 4 pole with all accessories for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for lt 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for mh 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for ct 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for lt 160 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for mh 250 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ct 100 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ah 200 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake dia 250 mm ,34 kg with brake pad & brake liner for ah for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for mh dia 300 mm ,34 kg with brake pad & brake liner for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for lt 250 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for ct 160 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for lt 200 mm ,34 kg with brake pad & brake liner for 120/30 ton eot crane , make- russian., location -tg hall ctps (1*110 mw), onload changeover switch 4 pole 200 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):200 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,#enclosure sheet, make- havells, schneider ,l&t,abb,hpl, 4 pole change over switch 320 amp#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):320a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure:steel sheet, make- havells, schneider ,l&t,abb,hpl, onload changeover switch 4 pole 400 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):400 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure: sheet, make- havells, schneider ,l&t,abb,hpl, voltage-110v ac, 1 no, 3-phase, 415v ac, power contactor a30-30-10-84, current rating - 30a, coil voltage-110v ac, 1no, 3 phase, 415v ac, addon block auxilary contact mnx a2, auxiliary relay, model-my4n-100,50hz,110v ac, contactor ax32-30-10-80,220-230v,50hz, contactor ax09-30-10-80,220-230v,50hz, contactor mnx18 18a,220v,1nc,3pole., contactor 3tf 30-10-10e,220-230v,50hz., contactor ax32-30-10-84,220-230v,50hz., 3 pole power contactor mnx32 in 110v ac, aux contact block 2a ca5 x-10 1no contact, aux contact block 2a ca5-01 1nc contact, olr 3ru2116-1kbo,09a-12.5a., olr ta25du-1.8m,1.3a-1.8a., olr ta25du-15m,10a-14a., olr ux1418,1.25a-2.0a., control transformer 415vac/110vac,200va, control transformer 415vac/110vac,250va, 1-phase 415/110v,50hz,1000a,150va control transformer (panel) insulation class-f , primary current-0.361a, secondary current-1.364a,il-0.66/3kv, miniature relay g2r-2-dc5-5v 5a two set of conversion 2c(dpdt conversion)dip,12.7x28.8mm power relay rohs
Tender For corrigendum : tender for supply of armor coated epdm edi membrane with both side ss clamp -window ac of 1.5 ton , sewage submersible dewatering motor pump. q-160 to 200 m3/hr , h- 15 to 20 m , p2 - 15hp , n-1450 to 1500 rpm , class f , sima lube smart lubrication 125ml automatic single point lubricator , battery 12 volts 26 ah , electric actuator butterfly valve 150mm dia , electric actuator butterfly valve 50mm dia , oil tight limit switch model sdvl-gs (1no+1nc) , smart ups rc 2000va for computer , armor coated epdm edi membrane with both side ss clamp for diffuser size 117mm-95-181-184-11-255-003 , length 1350mm , armor coated epdm edi membrane with both side ss clamp for diffuser size 165mm-95-181-184-11-255-003 , length 1350mm