Latest monitoring unit Tenders | Government monitoring unit Tenders

State Government

CTN :45650991

03 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For corrigendum : identification of an agency for project monitoring unit for skill training program

CTN :45496936

10 Jun, 2026 NA

Multi City - Bihar

Tender For corrigendum : selection of a technical agency for setting up a project monitoring unit (pmu) to support panchayati raj department, government of bihar

Central Government/Public Sector

CTN :45281032

04 Jul, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : providing of custom bid for services - appointment of dea empaneled consultant for setting up project monitoring unit (pmu) for procurement, monitoring, implementation of ppp and non-ppp project and administrative support at jawaharlal nehru port authority

corporations/Associations/Others

CTN :45704117

11 Jul, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For air flow monitoring unit with sensor, power supply: 24vdc+ /-10% , type of fluid: dry air, settable r , metrosil 5a c= 620/740 m ge , metrosil, 1a, ge sd64rgt, met108.

CTN :45706152

31 Jul, 2026 NA

Mumbai - Maharashtra

Tender For providing transaction advisory cum project monitoring agency/ project monitoring unit (pmu) for development of a 200 mw data centre project in maharashtra

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

Central Government/Public Sector

CTN :45648859

13 Jul, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - project monitoring unit (pmu) for assisting sports authority of india to manage and implement sports infrastructure projects

CTN :45648804

06 Jul, 2026 NA

Darjeeling - West Bengal

Tender For supply of digging work , ducting , power cable , poe switches , camera cover , monkey guard , outdoor pvc box , optical network unit , sfp port 9dbm , hard disk 8tb , optical line terminal 8 port optilink , poles for camera , installation , fiber splitter , patch cord , 12u network rack , extension board , fiber splicing , 42 inch monitoring unit , complete supply and installation of cctv , camera for cctv system (v3) (q2) , line interactive ups with avr (v2) (q2) , video recorder for cctv system (v2) (q2) , optical fibre cable for networking (q3)

Monitoring Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector