Latest monorail Tenders | Government monorail Tenders

Central Government/Public Sector

CTN :45743714

09 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply and installation of interior furnishing of one rake set of namo bharat rapid rail (16 car formation) including nose cone and driver cab interior panelling and fitting as per specification icf/md/spec-418, issue status-01, rev-01.amd.01 & 2 and rcf annexure rcf_namo bharat rapid rail. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: icf/md/spec-418 rev. 01 with amendment 1 & 2 and rcf annexure rcf_ namo bharat rapid rail. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45422700

09 Jul, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply and installation of interior furnishing of one rake set of namo bharat rapid rail (16 car formation) including nose cone and driver cab interior panelling and fitting as per specification icf/md/spec-418, issue status-01, rev-01.amd.01 & 2 and rcf annexure rcf_namo bharat rapid rail. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: icf/md/spec-418 rev. 01 with amendment 1 & 2 and rcf annexure rcf_ namo bharat rapid rail. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45727661

07 Jul, 2026 NA

Harnaut - Bihar

Tender For supply of din rail mounted earth leakage device (residual current monitor relay) with operating voltage 12-48 v ac/dc, conforming to iec 62020-1, suitable for sbc 2 of lhb power car. make: abb(rd3m-48) or bender (rcm470ly-21) or fanox (elr-3c) only as per rcf specification edts-103 rev-d am-1. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45682192

30 Jun, 2026 NA

Bongaigaon - Assam

Tender For supply of solid rubber tyre, size- 18x12x6 inch suitable for zagro battery operated car, rail cum road vehicle at nbqs. make/brand: actc, tvs or similar. hsn code- 40129010. [ warranty period: 30 months after the date of delivery ] ]

CTN :45432694

02 Jul, 2026 NA

Kamrup - Assam

Tender For corrigendum : supply of electrical and electronics items : : - charge controller , multi strand double core copper flexible cable 2.5 sq mm , copper cable single core multi strand 4 sq mm f.r. , copper cable single core multi strand dc cable 4 sq mm , bulb led , pin lugs 2.5 sq mm , pin lugs 4 sq mm , ring lugs 10 sq mm , connector mc 4 , inverter , dc db , acdb , ss hexa nut and bolt with washer 4 mm x 20 mm , ss hexa nut and bolt with washer 10 mm x 40 mm , ss hexa nut and bolt with washer 10 mm x 60 mm , allen bolt with spring washer m10 x 40 mm , monorail 40 mm x 40 mm x 2 mm , microrail 100 mm x 300 mm x 2 mm

CTN :45684613

15 Jul, 2026 50.97 Lacs

Kolkata - West Bengal

Tender For supply installation testing and commissioning of motorized monorail crane one set impeller blade for 150 cusec vt pump and one set submersible pump including new boring at keorapukur pumping station within kmc area ps regent park district south 24 pg

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

CTN :45635349

16 Jul, 2026 NA

Netanar - Chhattisgarh

Tender For providing of operation and maintenance of other machines and plants - repair work at pusher car rail track and charging car ib 2 and ib 3 areas in coke oven complex of nsl plant