Mortar Pan Scrap Tenders

Central Government/Public Sector

Tender For auction sale of pway scrap - condemned, released & un-serviceable cl.iii 90r curved switch 1 in 12-2set-3.432mts,52kg curved switch 1 in 8.5 tongue rail-6nos-2.472mts,52kg check rail-14nos-2.912mts,60kg glued joint -78mtr-12nos-5.451mts,52kg glued joint-97.58mtr-16nos-5.879mts,60kg curved switch 1 in 12 stock rail-1no-0.724mts,rail 52kg below 1mtrs-0.82mtrs-0.043mts. rail 52kg sej stock rail-21nos-5.250mts, 52kg curved switch 1 in 12 stock rail- 23.95mtrs-3nos-1.243mts, 52kg sej tongue rail-14nos-3.500mts, 60kg sej tongue rail-7nos-2.669mts,52kg curved switch 1 in 12 wol 1.5set-4.660mts,52kg curved switch 1 in 8.5 stock rail-2nos-1.076mts,52kg curved switch 1 in 12 tongue rail-4nos-2.136mts,52kg modified sej check rail-2nos-0.160mts,52kg cms crossing 1 in 8.5-1no-0.570mts.[ total-42.177mts] location-available at km.564/900-565/200 ohe mast no.564/42-565/10 at srt yard .not for sale- stock no.1:-rail 52kg -2.35+3.05+2.80 & rail 60r-2.10, stock no.2:- rail 52kg -1.00+8.52+8.19+5.96+5.25+5.73 and rail 60r-10nos and st sleeper -2nos.stock no:4-rail 52kg-2.30+5.18 sej t/rail attach +5.18 sej t/rail attach,sej chair with lug and bolt and nut -5nos attach and stock no.5:-rail 52kg -6.00+2.50 u/s and rail 52kg -9nos,rail 60r-2nos & stock no:4-1nos iron electric pole. road approach available with mud road. [1] delivery to be made on actual weighment basis only. in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5mtrs length, the purchaser (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5mtrs and hand over the non-ferrous and excess quantity to the custodian,,[2]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian as nfs. s1539.udm no.089606-25-00019 dt.03.02.26 hsn code no. 720429.

Central Government/Public Sector

Tender For auction sale of pway scrap - released p-way mix scrap of ms consisting of angle/board, lc broken material, checker plate, bridge washer, bolt, mg plate broken part, 52 kg rail/stock rail, 90r rail, guard rail, tiebar and fencing broken, st sleeper[off size], switch 52 kg, 75r rail, guard rail, cut pieces, 60r rail, 50r raiil, 41/1-4 lbs rail, mg plate,/ s chair, msbp off size, joggled/f plate 52 kg etc. old used and u/s laying near dbo station between adi-hmt section at 388/3-7. ms-1-stack no-1[angle/board etc-4.000mt], stack no-2[lc broken material-5.000mt], stack no-3[checkar plate-3.000mt], stack no-4[bridge washer, bolt, mg plate broken part-1.500mt], stack no-5[52kg rail/stock rail, cut pieces 32 nos-1.978mt], stack no-6[90r rail, guard rail, cut pieces 17 nos-2.428mt], stack no-7[tiebar and fencing broken-6.157mt], stack no-8[st sleeper-off size-1.991mt], stack no-9[switch 52 kg-7.262mt], stack no-10[75r rail, guard rail, cut pieces-0.667mt], stack no-11[60r rail cut and pieces-0.475mt], stack no-12[50r rail cut pieces-6 nos-0.337mt], stack no-13[41/1-4 lbs rail cut pieces-0.157mt], stack no-14[mg plate/s chair-1.145mt], stack no-15[msbp off size-0.603mt], ms-2-stack no-1[joggled/f plate 52kg-3.300mt], stack no-2[joggled/f plate 52kg-7.093mt]. mode of delivery by actual weight.

corporations/Associations/Others

Tender For auction sale of transformer radiators,brass scrap,ms blower (catalyst),wooden scrap,ms rail scrap,ci rail sleeper scrap,pvc cans - 30l -18, 20l-16,pvc scrap (splashers)

corporations/Associations/Others

Tender For auction sale of wooden scrap[rail sleeper & other wooden scrap],ms scrap [light and rusted iron sheet & ms can/tin],scrap aph baskets as is where is basis without cutting

Central Government/Public Sector

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only

Central Government / Public Sector

Tender For corrigendum : auction sale of depot ferrous scrap - 12274ms26a, 98050175, quantity- 93.975 mts scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan pan class="text-red-selected">mortarpan>s,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 273 to 276, left side of road no- 2 hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988

Central Government/Public Sector

Tender For auction sale of pway scrap - 03/sse/pw/ssa/25-26 grsp u/s t-3711 (6mm grsp for 52/60 kg rail and 60 kg sleeper) condition 1. loading by purchaser 2. mode of delivery:- actual weight 3. weighment by outside dharamkanta allowed.

Central Government/Public Sector

Tender For auction sale of pway scrap - m.s.scrap melting rail piecees below one meter of different rail section ,ercs,m.s. liner, broken fish plates/jfps(of different sizes),glued joint pieces below one mtr.of different rail section, nut-bolts/screws(different size),slide chairs(different angle & rail section),broken welding equipments, streachar bars, gauge tie plates,m.s.brackets, m.s.lugs,angle,channel sleeper fittings, sej brackets, m.s. plates , check rail, cut switch all type of miscellaneous p.way materials etc.

Central Government/Public Sector

Tender For auction sale of pway scrap - scrap rail 60 kg 1 mtr long above remarks :-kachcha approach road is available near by the lot. no wear and tear has been provided for any scrap rails delivery will be made on sectional weight per meter basis only. quantity is physically available. delivery will be made during dry season lot no. has been painted on the lot. actual measurement painted on each rail in meter. cutting of rail above 6 meters is allowed for easy transportation. the quantity as per ss-11 has been 96.944 mts.rail in nos.184,r/mtrs 1864.31 and physically available at the site. the stockholder will be fully responsible for any alteration, addition or deletion in the lot after joint inspection. dunnage 03 nos. rails are included in the lot length 20.12 r/mtrs and it should be delivered.at the time of delivery. fish plates/joggle fish plates/glued joints and other fittings are to be returned to the stockholder. in stack no.01 there are some mix rail 14 nos ,04 nos tounge rail &06 stack rail, laying near the lot. rail 52 kg,04 nos wing rail, & other rail not included in lot. the same should not be delivered. at the time of delivery. in stack no.02 laying near by lot 11.69 mtr rail , 03 nos other rail 60 kg , st sleeper 10, 01 ohe pole are not included in lot..the same should not be delivered. similar and other type of material such as scrap rails are lying nearby lot will not be delivered, only lot qty will be delivered. it is strictly advice to bidder to see the lot personally before the bidding for the lot. lot is ok for sale on above observations. stock holder- sse p .way kjt-ii.

Central Government/Public Sector

Tender For auction sale of pway scrap - m.s.scrap melting rail piecees below one meter of different rail section ,ercs,m.s. liner, broken fish plates/jfps(of different sizes),glued joint pieces below one mtr.of different rail section, nut-bolts/screws(different size),slide chairs(different angle & rail section),broken welding equipments, streachar bars, gauge tie plates,m.s.brackets, m.s.lugs,angle,channel sleeper fittings, sej brackets, m.s. plates , check rail, cut switch all type of miscellaneous p.way materials etc.