Web Analytics Made Easy - StatCounter

Motor Contactor Tenders

Get complete information related to latest Motor Contactor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Motor Contactor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Motor Contactor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45725830 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For biennial rate contract for torishima make bcw motor-spares for ntpc group stations - torishima:500mw:o-ring_4120.1, torishima:500mw:o-ring_4120.2, torishima:500mw:o-ring_4120.3, torishima:500mw:o-ring_4120.4, torishima:500mw:lock washer_9311.8:3.3kv, torishima:500mw:lock wshr_9311.1, torishima:500mw:lock wshr_9311.2, torishima:500mw:lock washer_9311.6:3.3kv, torishima:500mw:lock washer_9311.7:3.3kv, torishima:500mw:sprg wshr_9300.4, torishima:500mw:sprg wshr_9300.5, torishima:500mw:spring wshr_9300.6:3.3kv, torishima:500mw:spring wshr_9300.7:3.3kv, torishima:500mw:sprng wshr_9300.22:3.3kv, torishima:500mw:sprng wshr_9300.24:3.3kv, torishima:500mw:sprng wshr_9300.21:3.3kv, torishima:500mw:sprg wshr_9300.20_3.3kv, torishima:500mw:gasket_4000.21_bcw:3.3kv, torishima:500mw:gasket_4000.22_bcw:3.3kv, torishima:500mw:gasket_4000.23, torishima:500mw:gasket_4000.24_bcw:3.3kv, torishima:500mw:gasket_4000.20_3.3kv, torishima:500mw:lock washr_9311.20_3.3kv, torishima:500mw:lock washr_9311.21:3.3kv, torishima:500mw:lock washr_9311.22:3.3kv, torishima:500mw:hex bolt_9010.20_3.3kv, silica gel,torishima, torishima:glycol filling kit bcw, torishima:500mw:brg slve up_5290.1, torishima:500mw:brg slv low_5290.2, torishima:500mw:brg seg low_3870.2:3.3kv, torishima:500mw:heat barr pipe_hbp:3.3kv, torishima:500mw:guide ring _1311.2:3.3kv, torishima:earth plate_8223 bcw, torishima:500mw:strainer_7911, torishima:500mw:ring_5000_bcw:3.3kv, stud bolt,9020.6,torishima, hex nut,9200.6,torishima, earth bolt&nut,9020.30&9200.30,torishima, btm flg stud&nut,9020&9200,torishima, hex head bolt,9010.3/9010.4,torishima, torishima:500mw:metaflux gskt_4113:3.3kv, stator coil,8140,torishima,3.3kv, wedge,oak,8133w,torishima,hlav2x300+, wedge,fagus,8133f,torishima,hlav2x300+, stator slot cell,6892,torishima, wedge stopper,5001,torishima, coil bind,8134,torishima, temp sticker,8143,torishima, o-ring,torishima, o-ring,4120.12,torishima, o-ring,torishima, solder slve,8148,torishima, star connector,8222,torishima, insul tape,8141,torishima, heat shrink,6894,torishima, terminal unit,8340,torishima, glue,0900,torishima, seal comp,8147,torishima, washer,torishima, semiconductor tape,8149,torishima, solder,0140,torishima, insulation bushing,5202,torishima, hex bolt,9200.26,torishima, connector,8221,torishima, stator core assy,8132,torishima,3.3kv, torishima:500mw:o-ring_4120.1, torishima:500mw:o-ring_4120.2, torishima:500mw:o-ring_4120.3, torishima:500mw:o-ring_4120.4, torishima:500mw:lock wshr_9311.8, torishima:500mw:lock washer_9311.1_6.6kv, torishima:500mw:lock wshr_9311.2, torishima:500mw:lock wshr_9311.6, torishima:500mw:lock wshr_9311.7, torishima:500mw:sprg wshr_9300.4, torishima:500mw:sprg wshr_9300.5, torishima:500mw:sprg wshr_9300.6, torishima:500mw:spring wshr_9300.7:6.6kv, torishima:500mw:sprg wshr_9300.22, torishima:500mw:sprg wshr_9300.24, torishima:500mw:sprg wshr_9300.21, torishima:500mw:sprg wshr_9300.20_6.6kv, torishima:500mw:gasket_4000.21_bcw:6.6kv, torishima:500mw:gasket_4000.22_6.6kv, torishima:500mw:gasket_4000.23, torishima:500mw:gasket_4000.24, torishima:500mw:gasket_4000.20_6.6kv, torishima:500mw:lock wshr_9311.20_6.6kv, torishima:500mw:lock washr_9311.21:6.6kv, torishima:500mw:lock washr_9311.22:6.6kv, torishima:500mw:hex bolt_9010.20_6.6kv, torishima:500mw:brg slv low_5290.2, torishima:500mw:brg sgmt up_3870.1, torishima:500mw:brg sgmt low_3870.2, torishima:500mw:thrust brg plt_3840, torishima:500mw:heat barr pipe_hbp:6.6kv, torishima:500mw:guide ring _1311.2_6.6kv, torishima:500mw:strainer_7911, torishima:500mw:ring_5000_bcw:6.6kv, bot flg stud&nut,9020/9200,torishima, hex hd bolt,9010.3/9010.4,torishima, torishima:500mw:metaflux gskt_4113_6.6kv, stator coil,8140,torishima,6.6kv, wedge,oak,8133w,torishima,6.6kv, wedge,fagus,8133f,torishima,6.6kv, stator slot cell,6892,torishima,6.6kv, stator core assy,8132,torishima,6.6kv, torishima:660/800mw:o-ring_4120.1, torishima:660/800mw:o-ring_4120.2, torishima:660/800mw:o-ring_4120.3, t

Central Government/Public Sector

CTN :45633421 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For corrigendum : e5163079 rate contract for supply of im3302 slot wedge

State Government

CTN :45733040 Due date: 07 Jul, 202607 Jul, 2026 10.79 Lacs
Tender For i) supply of generator slot wedge fiber glass epoxy sheet g11/class f or above as per site requirement.(existing wedge is of size 30mm width x 4mm thickness x 232mm length with tapered ends) note- stator consists of 144slots with 05nos. wedges in each slot.ii)supply of generator slot liners texolite as per site requirement for tightening of all wedges (existing is of 25mm width x 1mm thickness x 1500mm) iii)supply of generator slot liners texolite as per site requirement for tightening of all wedges(existing is of 25mm width x 0.5mm thickness x 1500mm) iv)dismantling of existing stator slot wedges & slot liners v)installation of generator slot wedges & slot liners including all consumables such as epoxy resins, hardeners, thinners etc., complete for 144nos. of stator slots of unit 8 vi)testing charges to check the tightness of installed slot wedges (the testing shall be done by nabl-accredited agencies/ authorized agencies and submit reports)

Central Government / Public Sector

CTN :45728180 Due date: 20 Jul, 202620 Jul, 2026 NA
Tender For supply of cam assembly for motor contactor as per clw drg. no. 3twd.112.076 alt.2 or latest. set consist of: (1) cam- 6 nos. (2) fixing plate- 1 no. (3) m6 x 10 hex screw- 1 no. (4) spring washer- 1 no.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45682903 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For supply of set of springs for ep contactors consisting of 02 items as follows (1) spring for shunting contactor as per clw drg.no. 4twd.111.047a with latest alteration - qty - 100 nos / set (2) spring for motor contactor as per clw drg. no. 4twd.112.029a with latest alteration - qty - 30 nos / set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45675374 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

CTN :45643480 Due date: 14 Jul, 202614 Jul, 2026 NA
Tender For supply of modified motor contactor 1500a for locos. as per clw's drg.no. 0.twd-112.001 alt.12 & 4twd. 112.043 alt. 4 specn no. 4tes.110.001 alt.4. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45591924 Due date: 27 Jun, 202627 Jun, 2026 NA
Tender For rate contract for supply of support bracket and other insulating item - support bracket, packing/stringing/clamping block, taper wedge, bracing plate and other similar insulating items of thickness size : greater than equal to 20mm and less than equal to 40mm, other dimension as per drg & matl specn aa 22414 (latest revision), rotor slot wedge (rectangular), bracing plate and other similar item to size: (5 to 10)tk x b x l (b & l as per drg) & matl specn aa22414 (latest revision), terminal support and other similar item to thickness size : greater than equal to 40mm & less than equal to 60mm, other dimention as per drg & matl specn aa22414 (latest revision)

Central Government/Public Sector

CTN :45610225 Due date: 13 Jul, 202613 Jul, 2026 NA
Tender For supply of magnet valve for motor contactor to bhel drg. no 15880530003 v00 acs 1181/000 or m/s. beil part no. b158805300030 v00 for demu/dpc suitable for operating voltage of 110 volt. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :43882468 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For bid to ras supply of fasteners sets b b -qdegree csk socket head is 6761 din 7991 m8x25 , 90 degree csk socket head is 6761 din 7991 m10x15 , 90 degree csk socket head is 6761 din 7991 m10x20 , 90 degree csk socket head is 6761 din 7991 m10x25 , hex head bolt is 1364 din 931m8x55 , hex head bolt is 1364 din 931m10x50 , hex nut is 1364 din 934m3 , hex nut is 1364 din 934m4 , hex nut is 1364 din 934m5 , hex nut is 1364 din 934m6 , hex nut is 1364 din 934m8 , hex nut is 1364 din 934m10 , thin nut lock nut m3 , thin nut lock nut m4 , thin nut lock nut m5 , thin nut lock nut m6 , thin nut lock nut m8 , thin nut lock nut m10 , plain washersdin 125a m3 , plain washersdin 125a m4 , plain washersdin 125a m5 , plain washersdin 125a m6 , plain washersdin 125a m8 , plain washersdin 125a m10 , spring washers hv 430 to 530 din 128a m3 , spring washers hv 430 to 530 din 128a m4 , spring washers hv 430 to 530 din 128a m5 , spring washers hv 430 to 530 din 128a m6 , spring washers hv 430 to 530 din 128a m8 , spring washers hv 430 to 530 din 128a m10 , slotted counter sunk screw din963 m3x6 , slotted counter sunk screw din963 m3x8 , slotted counter sunk screw din963 m3x10 , slotted counter sunk screw din963 m3x12 , tapered self cutting thread inserts m3x6 , tapered self cutting thread inserts m4x8 , tapered self cutting thread inserts m5x10 , self cutting thread inserts with cutting slot m2. 5x6 , self cutting thread inserts with cutting slot m3x6 , self cutting thread inserts with cutting slot m4x8 , self cutting thread insersts with holes m3x4 , grub screw flat point type slotted din 551 m3x6 , grub screw flat point type slotted din 551 m3x8 , helicoil inserts with tang m 2point 5 x 3 point 75 , helicoil inserts with tang m3x3 , helicoil inserts with tang m3 x 4 point 5 , helicoil inserts with tang m3x6 , helicoil inserts with tang m 2 point 5 x 5 , helicoil inserts with tang m4x6 , insert tool helicoil insert m2 point 5 , insert tool helicoil insert m3 , insert tool helicoil insert m4 , wedge lock washers m3 , wedge lock washers m4 , wedge lock washers m5 , wedge lock washers m6 , insert tool solid insert m2 point 5 , insert tool solid insert m3 , insert tool solid insert m4 , insert tool solid insert m5
 Loading, Please wait...

Connect us via What's Up