Latest motor fan Tenders | Government motor fan Tenders

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

CTN :41209121

04 Aug, 2025 NA

Krishna - Andhra Pradesh

Tender For supply of air dryer spares and air study : : - r404a refrigirant ga 10kg , r410 a refrigerant 2 kg , hp switch 43bar solder , filter dryer liquid , kit replace 2202744001 , motor fan 300 v230 , filter dryer 30gr , electr drain ld202t , switch on off 23a , kit ctrl 230v , hpc compressor , r507a refrigerant 7 kg , dryer filter , air study

CTN :41204079

01 Aug, 2025 102

Multi City - Karnataka

Tender For invitation quotation for data rates of electrical items for bbmp (quotation tender for data rate) - supplying, installing, testing and commissioning of diesel generator set with following specifications. power rating as per standard reference condition as per-bs 5514/iso 3046/ iso 8528 & is 1002/iso 3046 generator set specifications.160 kva / 128 kw, supplying & fixing of 30 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 40 mtr length, d clamp tumble, crane charges, labour charges for data rate, supplying & fixing of 20 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 16 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 12 mtr highmast accessories that include winch plate, 250 kg winch, ss wire rope 50 mtr length, moulded cable 4sqmmx3 core 20 mtr length, d clamp tumble,crane charges, labour charges for data rate, supply and fixing of vertical furnace coil holding bricks (240 x 300 x 80mm) made out of refractory material to with stand a temperature of 1000 c using required refractory cement and other binding material to form into required shape (as per bis-8) complete, supply and fixing of vertical heating element suitable to operate on 220 volts 50hz (4.5 kw capacity of heating element) element shall be made out of 8 swg 25mm dia 6 mm pitch total length 3100 mm superior quality nichrome wire coil and shall be capped with fiberglass tube. new element shall be fixed in furnace heating slots using necessary labour consumable and terminated with end bolts etc complete., supply and replacement of smoke exhaust motor fan shaft fabricated out of ss310 dia 50mm x 780mm length with balancing impler 2nos key slot of 10 x 10mm with computer balancing impler-380mm dia,160mm width, 3mm sheet fabricated(ss304), supply & erection of b-58 belt(), supply & erection of 311h sleeve (adapter)(), hire charges for supply, fixing, wiring, servicing & maintaining of 200 watts led type flood light fitting with accessories. upto 3 days, supply & erection of 22211ck bearing (for exhaust motor )(), providing door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40 x40x100mm shifting block with handle and mounting bracket., supply & erection of 2 wire temperature controller range 0 to 1200.c of size 99 x 99mm,, supply & erection of ss310 pipe thermocouple 19 mmod & 700mm length, simplex, supply & erection of smoke exhaust motor 7.5 hp 3 phase, 50hz,1500rpm, induction motor, with table lock pully 180 dia, 2 nos grove, make abb/kirloskar/suguna or equalent, supply & erection of 1hp single phase 50hz water pump (open well submersibal pump set)(), supply & erection 2hp 3phase, 50hz, 1440 rpm induction flange mounted water pump for scrubber, inlet 2 inch, outlet 1 and off inchinch, supply & erection of 1/2hp 3phase 50hz, 1440rpm flange mounting motor with gear output 10rpm with grounting frame, complete including loading, unloading and transportation to work site spare.(), furnace main door servicing include of bearing replacement 2 nos and door lifting chain replacement(), servicing & cleaning of scrubber, tank,scrubber duct,exhaust blower, exhaust duct furnace to chimny and cleaning of chimny (6 monts once)(), hire charges for supply, fixing, wiring, servicing & maintaining of 150 watts led type flood light fitting with accessories upto one month, providing servicing, repairing and overhauling of existing body charging trolley complete.(), supplying & fixing of epoxy of epoxy insulators (bus bar mounting, supplying & fixing

CTN :40825759

31 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of compressor spares - plug , stud screw , stud screw , key fitting , deep groove ball bearing , ring , ring rectangular , adaptor sleeve , vent valve , spring valve suction i stage , thermometer , suction valve plate iind stage , spring valve suction ii stage , stud adaptor , pressure control device , connecting rod bearing , piston pin bushing , cylinder head packing 1st stage , cylinder head packing 3rd stage , cylinder head packing 2nd stage , cylinder with head and valve 3rd stage , filter element , cyl dia50 m/c hp03/05 , cyl dla 100 m/c ts05/07 , cylinder dia 60 , head dia 100 cyl m/c ss07/10 , flat valve dia70 cyl ss02/03 , inter cooler hp m/c ts02/03 , valve flat 60 dia , valve finger type dia50 cyl , valve plate dia 60 cylinder , gasket 0.75 c/case to cyl ts 02 , gasket 50cyl to valve flat , piston assy 100 ss/ts 07 , slotted oil control ring , seat felt dia83xdia126x1. , nipple hex 3/4bspx60 hp 07/10 , ring pkg dia50 cyl i/l , bearing 6307 , hex. bolt m6 x 20 , circlip internal 18 , o-ring , angle thermometer 0-100 , lp-hose , hp-hose , hose pipe , suction filter , solenoid valve , intake oil filter , solenoid valve for colling water , lp-hose , non-reture valve , coil for solenoid valve , repair kit for cooling water pump , service kit for cooling water pump , hd-hose , coil , angle thermometer (0-250 c) , air filter , connecting rod bolt , connecting rod 1st stage , piston 2nd stage , temperature supervision , crank shaft , 24v dc relay 2c/o with led and base along with clamp , triple pole miniature circuit breaker rated 2a a9n3p02c , smps, 150w, i/p - 230v ac, o/p - 24v , drive end bearing , free end bearing , motor fan , double pole miniature circuit breaker rated 4a a9n2p04c , selector switch 2 maintained position with 1no contact xb5- , indicating lamp integral led white, 24vdc , indicating lamp integral led green, 24vdc , indicating lamp integral led red, 24vdc , shrouded pushbutton yellow colour with 1no contact , shrouded pushbutton red colour with 1no contact , shrouded pushbutton green colour with 1no contact , mushroom turn release pb red colour with 1nc contact , indicating lamp integral led blue, 230vdc , fuse terminal block 6a with csfl4u(1a,2a) fuselink , filter assy i/l air dry a type , filter assy i/l air b type , valve assy b , akcc-60/60 rfpl avm , motor bearing drive and free end , air dryer replacement cartridge , drive end bearing , free end bearing , motor fan , pre-filter element (fhp420xa) , display unit for dew point meter , molecular sieve (xeachp26011) , water resistant pearl (xeachp26010) , filter element for hp100s055sdb , filter element for hp100m010 (fhp730x25) , pipe after cooler , o-ring base , cooling fan 7.6 hp &10 hp , manual drain complete valve seat , manual drains seat , safety valve 300 bar , shaft ball bearing , oil seal , o-ring crankcase , o-ring screw back cover crankcase , bearing seal gasket , piston rings set 1st stage , reed valve set 1st stage , piston pin 2nd stage , piston rings set 2nd stage , inlet valve 2nd stage , o-ring discharge valve 2nd stage , gasket down reed valve , gasket up reed valve , piston sleeve 3rd stage , piston pin 1st & 3rd stage , cylinder gasket i60 , piston rings set 3rd stage , lock ring piston pin , o-ring piston sleeve 3rd stage , discharge valve 3rd stage , inlet valve 3rd stage , o-ring discharge valve 3rd stage

corporations/Associations/Others

CTN :41217503

01 Aug, 2025 NA

Guwahati - Assam

Tender For auction sale of scrap plastic ,rubber scrap,door body panel, boot, trunk,sheared body scrap truck,bale body scrap,tyre with rim cv,seat scrap,fabric scrap,glass scrap,wood,differential with dead axle,fuel tank,mix steel,cut chassis scrap,wiring harness,compressor scrap,motor fan blower wiper,aluminium scrap

CTN :41200946

04 Aug, 2025 NA

Hooghly - West Bengal

Tender For supply of set of special tools for elgi make oil free air compressor, model- rr100700f. consisting of f ollowing items- i) fan/flywheel removing tool, elgi part no. 072300080 - 1 no./set, ii) gudgeon pin removin g tool, elgi part no. 072300090- 1 no./set, iii) motor fan removing tool, elgi part no. 072300100- 1no./set. [ warranty period: 30 months after the date of delivery ]

CTN :41119073

18 Aug, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of complete cooler (fan+ motor+ damper for motor fan). suitable for traction transformer of 3 phase memu coach type lot 1250 [ warranty period: 30 months after the date of delivery ]

CTN :40997799

29 Jul, 2025 NA

Multi City - Multi State

Tender For supply of ac mvrf motor complete set( including casing, motor,fan) for vertical dbr as p er rdso spec no elrs/spec/dbr/0028, rev.0 with amendment no.1 &2. [ warranty period: 30 mont hs after the date of delivery ]

Motor Fan Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others