Get complete information related to latest Motor Starter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Motor Starter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Motor Starter Tenders.
Tender For replacement of damaged gi pipes in existing tube-well and installation of new motorstarter at i/a chirawa and supply & fixing of 150mm di valve at i/a jhunjhunu
Tender For maintenance of e.i in rb at chandigarh.(providing lawn lights in house no. 68 (type-dmh) sector-7, chandigarh. (e.i. wrok). - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required., group b, dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no. 2.16 supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., dsr item no. 8.9.5led batten light (system lumen efficacy 105 120 lm/watt)supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, (as per complete item no. 10 of the dnit)., 18- 22 watt, supply and erection of b.l. holder of make anchor panta / havells reo/ gold medal essenza isi marked on existing jn. box / wooden block including making connection etc as required., s/e of led bulk head luminaries weather proof frosted light with pmma / pc reflector and silicon gasket to be installed on surface. the led fitting should have minimum system lumen output minimum 1000 lumen and the driver of the fitting should be workable on 140-260 volt. (as per complete item no. 12 of the dnit)., supply & laying of pvc copper wire 1.5mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of engineer-in-charge. the copper wire should be of polycab/ l&t/ havells/ finolex/ r.r. kables make only., supply & erection of fresh air fan high speed motor with copper wound 10 sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of havells make ventiliar dx white / orient make ventilator / crompton make brisk air/ bajaj make 70049 250mm sweep only. (as per complete item no. 14 of the dnit)., s/e of led 8w/ 9 w. bollard fitting. the bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. the bollard should be made out of extruded aluminium profile and die cast aluminium base with pmma/ opal diffuser bollard painted with superior quality of paint. (as per complet
Tender For bid to ras bid to ras supply of purchase electrical engg lab equipment and machinery items--digital energy meter , portable digital wattmeter single phase , ohms law verification kit , kirchhoff s law verification kit , portable digital ammeter ac , portable digital ammeter dc , portable digital voltmeter ac , portable digital voltmeter dc , resistance in series and parallel training kit , portable digital power factor meter , hydrometer , rlc circuit trainer kit , dc regulated power supply , portable digital wattmeter three phase , digital lcr meter , inverter , battery for inverter , battery charger , portable analog ammeter ac , portable analog ammeter dc , portable analog voltmeter ac , portable analog voltmeter dc , analog multimeter , phase sequence indicator phase indicator , digital tachometer contact cum non contact , current transformer , potential transformer , cathode ray oscilloscope cro , digital earth tester , portable digital power factor meter three phase , portable digital power factor meter single phase , portable digital frequency meter , digital flux meter , thermistor kit , lvdt trainer kit , 3 phase power measurement trainer , analog megger insulation tester , single phase transformer , universal motor , dc servo motor , dc motorstarter , ac commutator motor , variac single phase , dc shunt motor shunt generator set , dc shunt motor series generator set , dc motor alternator set , squirrel cage induction motor , slip ring induction motor , single phase capacitor start motor , scot connection transformer , three phase transformer , variac three phase , ac motorstarter , stroboscope , synchroscope , synchronous motor 3 phase , single phase resistive load , three phase resistive load , sliding rheostat wire wound10 ohms 1 amp , sliding rheostat wire wound 50 ohms 1 amp , sliding rheostat wire wound 50 ohms 2 amp , sliding rheostat wire wound 100 ohms 1 amp , sliding rheostat wire wound 100 ohms 2 amp , three phase ac to dc rectifier set , digital breakdown voltage tester , inverse time over current relay induction type , earth leakage relay , 3 phase power measurement trainer kit , fuse and mcb tesing kit , inverse time over current static relay , relay testing kit , plc trainer kit
Tender For supply of submersible pump set (three phase) (v2) as per is 8034:2018 (q2) , pvc insulated cables for submersible pumps - as per is 694 (q2) , submersible pump starters (motorstarter controls) (q3)
Tender For maintenance of electrical installation & fans repair maintenance of pump set & diesel generator set at residential colony at japorijog. (sh: supply, installation, testing and commissioning of internal electrical installation including switch socket, motorstarter, led light, downlighter, post top, flood light, street light, cable junction box etc at residential colony at japorojog)subwork/packages:sitc of iei i/c switch socket, motorstarter, led light, downlighter, post top, flood light, street light, cable junction box etc at residential colony at japorijog
Tender For supply of 5 port atex solenoid valve model no-56-vqc2301-5 make- smc , supply block model no-sv2000-52u-1asc10 make- smc , manifold block assembly model nosv2000-50-1a-c8 make- smc , exhaust block model no-sv2000-51d-12a-c10 make- smc , 5 port solenoid valve model no-sv2100-5 make- smc , 5 port solenoid valve (atex) model no-56-vqc2101-5 make- smc , profibus dp si unit model no- ex600-spria make- smc , manifold block assembly model no- sv2000-51d-11ac10 make- smc , sv series manifold block assembly model no- sv2000-50-1a-c8 make- smc , 5 port solenoid valve model no-sv2000-52u-1a-c10 makesmc , end plate assembly model no- vvqc2000-3a-1c10 make- smc , manifold block assembly model novvqc2000-1a-s-c8 make- smc , si unit model no- 56ex250-spr1-x42 make- smc , combo modular frl unit model no- ac40-x8d75 make- smc , combo modular frl unit model no- ac50-x8d74 make- smc , combo modular frl unit model no- ac30-x8d95 make- smc , stainless steel filter unit model no- aw40-n40-2x2207 make- smc , silencer temp model no-an15-c08 make- smc , end plate assembly temp model novvqc2000-2a-1-c10 make- smc , blanking plate model no-vvq2000-10a-1 make- smc , end plate ( ex600) model no- ex600-ed2 make- smc
Tender For 8657 repair/maint and upkeep of water supply and swimming pool installations including pumps, motors, starters and water supply distribution lines at asi, old nda areas and other minor units under ge (central) pune
Tender For corrigendum : day to day operation and guarding of the pumping machinery through auto motorstarter panel at p.h. no. i and ii under mirhati and adjoing moujas pwss , block-khargram, dist-murshidabad.