Latest movable platforms Tenders | Government movable platforms Tenders

State Government

CTN :45707698

03 Jul, 2026 79.2 Thousand

Rewari - Haryana

Tender For supply of basic furniture for sub divisional engineer horticulture office hsvp rewari -supply of office main chair with revolving heavy seat & back seat quality hydraulic 01 no. office visitor chair with heavy structure with pipe cushton 04 nos., computer chair revolving 01 no. office table with both side drawer and heavy locking system 5' x 2.5' 1 no. office table size 5' x 2.5' with locking system and one side drawer 1 no including loading unloading carraige complete in all respect etc.

CTN :45728139

06 Jul, 2026 NA

Liluah - West Bengal

Tender For supply & installation of hydraulic motorized pipe bending machine double acting system. specification i) pipe bending capacity: 25 mm (ss heavy) ii) thickness: 02mm iii) motor 2hp 1440 rpm iv) eligible for 180 degree bend v) bending rpm 3 vi) bending accuracy less than 1? with gear oil vii) panel controlled schneider die and shaft material special fabricated body structure with 25 mm die [ warranty period: 12 months after the date of delivery ] ]

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

corporations/Associations/Others

CTN :45668488

25 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of condemned - atomizer (assorted),condemned - 10 feet solvent sticker printing machine - another items,condemned - damaged air baloon,cond - ltv tyre (assorted),condemned - 10.00 x 20 radial tyre,condemned - 11.00 x 22.50 radial tyre.,condemned - 10.00 x 20 tube with neck .,condemned - 10.00 x 20 full size flap .,condemned - flap cut pieces,condemned - tyre clippings .,condemned - tyre buffing dust .,condemned - assign plastic bag .,condemned - 12v 25p (180 amps) plastic battery .,condemned - used oil in 210 lts barrel .,condemned - auto aluminium mingled with bolt & nut .,condemned - bs iii radiator core (alu.) .,condemned - old aluminium cut pieces .,condemned - self motor (assorted).,condemned - alternator (assorted).,condemned - wiring horness.,condemned - electrical items,condemned - roofing iron structure & m.s.iron .,condemned - roofing iron structure & m.s.iron,condemned - auto iron .,condemned - brake drum .,condemned - iron chips & burrs ( 5 - barrels) .,condemned - clutch disc (assorted) .,condemned - gear box main shaft with gearand other items .,condemned - axle shaft (assorted) .,condemned - door cylinder (assorted) .,condemned - hydraulic jack (assorted) .,condemned - waste m.s. iron scrap .,condemned - air filters .,condemned - wheel disc .,condemned - bs iii tyre lock ring (inner ring-152 nos + outer ring-152 nos) .,condemned :- fly wheel -and other items,condemned - a/c bus air compressor - and other items,condemned :- air comp. body - and other items

State Government

CTN :45440398

25 Jun, 2026 19.50 Lacs

Delhi - Delhi

Tender For corrigendum : consultancy for preparation, submission and approval of hydraulic design for construction of outfall drain phase-ii from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, including design of outfall structure at the drain, rohini - construction of outfall drain from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, rohini (phase-i) sub- head : consultancy for preparation, submission and approval of hydraulic design for construction of outfall drain phase-ii from the junction of sectors 31, 32, 26, and 24 to the supplementary drain, including design of outfall structure at the supplementary drain, rohini (phase-ii).

Central Government/Public Sector

CTN :45638135

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of high back executive chair, ack frame structure made of aluminium seat & back upholstered with microfiber & molded fluffy cushion flip flop armrest with pu pad for wide seating 4 stage locking tilt mechanism class 2 100 mm hydraulic 330 mm chrome base 50 mm twin superior nylon caster 1 year warranty , colour brown [ warranty period: 12 months after the date of delivery ] ]

CTN :45636916

30 Jun, 2026 NA

Junagadh - Gujarat

Tender For consultancy service for survey, geotechnical investigation, design and estimate preparation for construction of new check dam/bandhara/hydraulic structure in the jurisdiction of junagadh irrigation division, junagadh for the year 2026-27 (second attempt)

Central Government/Public Sector

CTN :45324560

23 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of

State Government

CTN :45582278

01 Jul, 2026 NA

Junagadh - Gujarat

Tender For consultancy service for survey, geotechnical investigation, design and estimate preparation for construction of new check dam/ bandhara/hydraulic structure in the jurisdiction of junagadh irrigation division, junagadh for the year 2026-27 (second attempt)

Movable Platforms Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government