Get complete information related to latest Mpcm Sticker Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mpcm Sticker Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mpcm Sticker Tenders.
Tender For supply of console to drg.no. aaa11829 item-1 alt ' a ' = 2 nos. aaa11831 item-1 alt ' a ' = 2 n os. special condition : item to be packed in polythen bags and in suitable size wooden pallet. 1) all polythene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)eac h polythene cover must have identification label with list of items inside. 3)each wooden bo x shall be stenciled or rigidly nailed with identification label. 4)finished components shall be t horoughly cleaned and applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094 latest shall be followed. for procedure and colour sh ade excluding the areas as specified in detail drawings. 5) suitable packing to be done to prevent d amage during transit, unloading and rusting during storage. [ warranty period: 30 months af ter the date of delivery ]
Tender For supply of drain pipe arrgt for modular toilet - welded design of lhb builds with toile t over the headstock area to drg nos. 1. aai1061700100 - 1 no, 2. aai1061900100 - 3 nos, 3. a ai1062100100, alt."a" - 1 no, 4. aai1062700100 - 1 no. 5. 58111072, alt 'nil' - 2 nos i) each item sho uld be marked labeled for easy identification. ii)all the items should be supplied in coac h sets only. special condition : suitable packing to be done to avoid damage during transit , unloading and rust prevention during storage. [ warranty period: 30 months after the dat e of delivery ]
Tender For supply of traction lever to drg. no.45505006 col i, alt 'c' (rcf pl.no.33500551) special co ndition : item to be packed in polythen bags and in suitable size wooden pallet. 1)all polyt hene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)each poly thene cover must have identification label with list of items inside 3)each wooden box s hall be stenciled or rigidly nailed with identification label [ warranty period: 30 months a fter the date of delivery ]
Tender For supply of set of fasteners for nmr coach wheels. one set consist of 4 items. item 1) fit bolt for nmr bogies to icf drg. no.aaa02159. - 1 no. note. i) mat erial shall confirm to en8 or similar. ii) fit bolt shall be suitably zinc electroplated to minimum coting thickness of 8 microns with yellowish gleaming to yellow brown iridescent finish. iii) identification details (manufacture's name/logo /brand) shall be suitably embossed/punched/laser marked in 5 mm high letters. iv) thread pitch shall be 3mm to match prevailing torque type hexagon regular nut. item-2) prevailing torque type hexagon nut to iso 7040-m24-8 or iso 7040 -m24-10 as per icf drg. no. 67302014 alt-e, item no.26 -1no. note: zinc electroplated to grade a3l of annexure e of is-1367(part eleven) item-3) washer for nmr pinion arrangement (machined and surface ground) to icf drg no.aaa02149-1no. note. i) material specification to is:2062 e250 a or is:2062 e250 c or is:2062 e250 cu c or irs m-41. ii) finished component zinc electro plated to grade a3l of annexure-e of is:1367(part eleven) item-4) hardened and temper ed washer (for m24 bolt) as per icf drg no.aaa02160 - 1no. note. i) dimensions, material mechanical properties, testing etc. shall confirm to washer iso 70 89-24-200hv ii) after hardening & tempering washer shall be surface grinding. iii) hardened and tempered washer shall be suitably zinc electroplated to mi nimum coting thickness of 8 microns with yellowish gleaming to yellow brown iridescent finish. iv) identification details (manufacture's name/logo /brand) sha ll be suitably done with laser marking. [ warranty period: 30 months after the date of delivery ]
Tender For supply of one coach set of air spring for vb/train set coaches, as per drawing: m/s gmt drg no. 17308901 rev-05 , qty-04 nos. item to be as per m/s ec engineering specification no mt18br2 001467-02., packing instruction: 1. packing as per standard packing. it should be en sured that item should not rub during transportation. the item should be packed with adequate strength. transit damage if any shall be at the cost of supplier. 2. in addition to this, the following instructions can be considered to be added to the packing instr uctions for ensuring proper identification and linkage of the items against the purcha se orders:- a. the item and its packing shall carry a qr code sticker containing the det ails as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number (or lot number for bulk items) of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date b. the qr co de shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. c. in case the above details are not available or the qr codes are not readable, the supplied material is liable to be rejected [ warranty period: 48 months after the date of delivery ]
Tender For supply of pipe 42x2 in length of 6000 mm, as per drawing: din2391-c-din17456 grade 1.430 1 (x5crni1810), ''solution annealed as per para 6.2 of din 17456-99'' - 3.1b & identification marking as per sme/dev l.no.md46131 dt.03/05/06., packing instruction: as per standard pack ing. it should be ensured that item should not rub during transportation. the item sho uld be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For supply of zitms - design, manufacture, supply of integrated track monitoring system f rom zerospeed having: track parameters recording system, full rail profile and wear measurement system, system formeasurement of acceleration on one pivot of trc & test vehicle/locomotive and on both side axle boxes of oneaxle of trc, system for identification of any obstacle in maximum mov ing dimension (mmd) envelope of ir,system for rear window video recording of ir track ,system for video recording of track components andanalysis by image processing for status of track component s, as per specification no. tm/im/448 (revision-1,2023) along with consumables, technical support an d spare parts during warranty period and including agencycommission. note 1 - the consumables inc luded in this item are the consumables required for maintenance ofthe system [warranty period:24 months after the date of delivery ]
Tender For supply of hexagon turned fit bolts of size m20x165mm. the nominal diameter of hexagon t urned fit bolts is 20mm, actual diameter is 21.2mm. the each hexagon turned fit bolts of size should be s upplied with 1 nut and 2 washers, gi coated. the bolts, nut and washers should confirm to is code -is:3640 & is:1367, property class 4.6. the hexagon turned fit bolts supplied should be manufactured and confirm t he is codes -is:3640 & is:1367, property class 4.6. and the firm should submit the test report of the bolts fr om govt./ nabl approved lab. proper cardboard box packaging should be done while transporting the item from agency to consignee, for to avoid damage of item during transit. the hexagon turned fit bolts supplie d should be gi coated. the identification mark of the manufacturer of bolting assembly and property class marking to be embossed on top surface of the head of bolt. the hexagon turned fit bolts supplied should al so fulfill the specifications mentioned in the temporary girder to drg no.rdso/b11042 of 26.80m (80ft) len gth and temporary girder to drg no.rdso/b-11041r of 20.40m (60ft).the firm should provide advance sa mple to buyer's before commencement of bulk supply.the firm should submit 'guarantee/warranty certific ate' from oem along with supply,as per irs warranty condition.the supply of hexagon turned fit bolts of si ze should be as per the technical specifications and general requirements enclosed in annexure-i. [ warr anty period: 30 months after the date of delivery ]
Tender For supply of helical spring, inner, for bolster suspension, dpc/demu to icf drg. no.dmu/dp c-0-5-004, alt-j, item no.1.note:- manufacturers should indicate their identification mark, month and ye ar of manufacture at a suitable location by using a suitable method without affecting the performance of the product. [ warranty period: 60 months after the date of delivery ]