Latest ms frame Tenders | Government ms frame Tenders

Central Government/Public Sector

CTN :42138364

10 Oct, 2025 NA

Palakkad - Kerala

Tender For prospective bidders for rotork electrical, actuators ms frames

State Government

CTN :42135364

23 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For portable door frame metal detector

CTN :42120192

13 Oct, 2025 27.76 Lacs

Tonk - Rajasthan

Tender For supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk - supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk, providing & foxing set of recycled plastic dustbin with ms frame stand and top cover capacity upto 60-60l and bin size 2 x 1 x 1 ft. bin thickness 8 mm frame thickness 8 mm weight of minimum 15 kg. and logo of nagar parishad sikar and dustbin written on two side, complete as per direction of officer incharge., providing & fixing of recycled plastic bench with thickness of 18 mm. size: 4.5 x 2.5 x 3 ft. weight loading capacity upto 300 kg. weight of bench approx 70 kg. with logo of nagar parishad tonk written on bench complete as per direction of officer incharge., providing & foxing of square recycled plastic tree guard, with thickness of 8 mm, size: 4ft x 1.3 ft 1.3 ft. with nagar parishad sikar logo on it complete as per direction of officer in charge., supply & fixing of eco friendly products toilet made by recycled waste in various places at nagar parishad tonk with all complete fittings, providing and fixing of recycled plastic peacock for show piece and beautification purposes in parks. with support of ms frame isi marked. frame of ms and covering it by lumbers made by mlp waste plastic , also screwed by ss screws. peacock in front made by metal frame internally for support and outside recycled plastic sheets. made by recycled plastic sheets termite proof , water proof , fire retardant and anti thef each lumbers size-: l-4ft, b-6 inch. thickness of recycled plastic sheets-: 8mm and 18mm used. in front flower pots size of 6 inches and big pot size of l-2ft. b-1ft. size can be variable as per officer in charge on site. also coloured as per requirement., outdoor round table (1) , chairv(4) material-post consumer plastic waste thickness-18mm waterproof, fire retardant, strong, screw holding, termite proof & anti- microbial. corrosion free, rust free, heat resistant sturdy & tough

CTN :42137750

10 Oct, 2025 NA

Junagadh - Gujarat

Tender For supply of chairs for branch - ind pre 27(kurlon 32 d foam wooden polish handles class 3 gas pump fiber + metal baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 27 mb(kurlon 32 d foam wooden polish handles class 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 35(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide multi lock mechanism 590 gsm rexineregal castor wheel), ind pre 35 mb(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 14(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind net 11(mess back net moulded seat plastic handle powder coated basesingle lock mechanism regal castor wheel), curved sofaproviding and fixing salwood frame inside with 4elastic belt, 4foam with upholstery size 10ft length, curved sofasingle chair providing and fixing salwood frame inside with 4elastic belt, 4foam with upholstery size 3ft length, centre table providing and fixing ms frame, glass 10mm with levler bush, centre table providing and fixing marble top with ms with pvd coating base/legs, carpetproviding and fixing fully upholstery fabric material size 4 x 4

CTN :42131867

24 Oct, 2025 NA

Leh Ladakh - Jammu And Kashmir

Tender For supply of dismantling of old worn out false ceiling material with frame structure of xtr hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of false ceiling in transmitter hall and other technical area at leh, ladakh as per respective drawings , providing and applying of 50mmx50mmx12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and other technical area at leh, ladakh , dismantling of old worn out wall paneling with frame structure of transmitter hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of wall paneling treatment in transmitter hall and technical area at leh ladakh as per respective drawings , providing, fabrication and fixing of cedar or teak wooden planks 75 mm x 15 mm in transmitter hall and other technical area at leh ladakh , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and other technical area at leh ladakh , providing, fabrication, fixing and polishing of wooden table for transmitter hall with console table top 25mm thick wooden board or commercial ply with 1mm thick sunmica sheet , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls surface in xtr hall and technical area, after touching on corners, joints and screw heads , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , fixing of 1ftx1ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out false ceiling material with frame structure of transmitter hall & other technical area, shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling in transmitter hall & other technical area at leh (ladakh) as per drawing sg-10150, 10178/4 and respective drawings. description of scope as per measurement taken at site: providing, fabrication and fixing of g.i metal 22 swg channel (size of channel in mm: 15 x 50 x 50 x15) frame structure base channel frame of transmission booth studio, control room, talk studio and other technical area. providing, fabrication and fixing of frame structure with gi metal sheet channel. for hanging arrangement wall to wall 40mm x 40mm x 2mm ms slotted angles with strap hangers shall be provide as per site requirements to support the gi frame structure. these slotted angles shall be further supported 8mm ms tie rods and 10mm ms fasteners from the real ceiling to make the entire structure in level and //bid details 2 / 24

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :41828823

14 Oct, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of door frame metal detector (q2)

Central Government/Public Sector

CTN :41799867

10 Oct, 2025 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

Central Government/Public Sector

CTN :41489566

13 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For corrigendum : open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

Corporations And Associations And Others

CTN :42116439

06 Oct, 2025 NA

Delhi - Delhi

Tender For fabricating and supplying of view cutter made up of ms frame of hollow section pipe and covered the frame with m s sheet in different locations of dhalao /open sites in wards fall under jurisdiction of central zone.

Ms Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others