Latest ms motor Tenders | Government ms motor Tenders

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45481775

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of spares for lhp make lt motors at nstps - de bracket,lhp,280m, de inner brg cap,lhp,280m, terminal block,lhp,280m, nde inner brg cap,lhp,280m, nde bracket,lhp,280m, cooling fan,lhp,280m, cowl (fan cover),lhp,280m, de bracket,lhp,180ml, de inner brg cap,lhp,180ml, terminal block,lhp,180ml, nde inner brg cap,lhp,180ml, nde bracket,lhp,180ml, cooling fan,lhp,180ml, cowl (fan cover),lhp,180ml, end shield de,lhp,motor, terminal block,lhp,motor, end shield nde,lhp,motor, cooling fan,lhp,motor, de bracket,lhp,71, terminal block,lhp,71, terminal box,lhp,71, nde bracket,lhp,71, cooling fan,lhp,71, cowl (fan cover),lhp,71, de bracket,lhp,71

Central Government/Public Sector

CTN :45440266

16 Jun, 2026 NA

Medak-T - Telangana

Tender For corrigendum : rate contract for supply of ovef assembly for a period of 01 years - package 1 - oil vapour exhaust fan assembly, cent exhaust fan 0.11m3/s with ie3 motor(flow rate 0.11m3/sec, head 100mmwc, motor 0.37kw, iia/iib), end shield cover for de & nde motor, cooling fan for exhaust fan ie3 motor, cooling fan cover of motor, terminal block exhaust fan ie3 motor, de & nde bearing exhaust fan ie3 motor, ie3 motor for exhaust fan, terminal plate for ie3 motor, bearings de & nde exhaust fan motor

Central Government / Public Sector

CTN :45555406

30 Jun, 2026 NA

Medchal-T - Telangana

Tender For supply of 0.75 kw (1 hp) 3 phase induction motor, 415v, 1440 rpm, 50hz, ip55 protection, class-f insulation, s1 duty, frame 80, foot mounted and flange type complete with terminal box and cooling fan suitable for industrial application. specification standard values type: 3 phase induction motor power: 0.75 kw/1 hp no 10650 1 10650 voltage: 415v 10% current: 2.1 a speed: 1400rpm frequency: 50hz frame size: 80 protection: ip55 duty: s1 insulation class: f efficiency: 74% mounting: foot mounted ]

CTN :45527360

03 Jul, 2026 NA

Uttara Kannada - Karnataka

Tender For tender for supply of dip stick , starter motor delco remy , speed control unit ecd card 5111 , k cool super plus 50-50 premix 25 ltr can , engine conrtrol unit (ems907) , injector assly , terminal sleeve (red) , terminal sleeve (black) , radiator for 6r1080t canopy genset , temp sensor with inbuild transmitter , pressure transmitter , 0-2.5 bar pressure transmitter , oil filter (mann) , float type level sensor for marine application , adaptor for lub oil temp , diode rectifier semiconductor make 16 amp.rectifire 35-10 , joint for glacier filter

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

corporations/Associations/Others

CTN :45357213

23 Jun, 2026 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : tender for supply of control valve - limitorque electrical actuator model no.l120 to10 gear limit switch assembly , stem nut , declutch lever for actuator with model no l120 to 10 make limitorque , actuator model no. l120 to 10 o ring set (pc no. 46 or 47) , h.w. clutch sleeve for actuator with model no l120 to 10 make limitorque , actuator model no. l120 to 10 worm gear , motor pinion for actuator with model no l120 to 10 make limitorque , power supply card for epac actuator model no l120 to 10 make limitorque. , declutch cap for actuator with model no l120 to 10 make limitorque , worm gear lug ring for actuator with model no l120 to 10 make limitorque , push button assembly , e pac unit assembly , actuator model no. l120 to 10 torque switch assembly , actuator model no. l120 to 10 de clutch shaft assembly , actuator model no. l120 to 10 worm shaft assembly , actuator model no. l120to10 limit switch assembly , sbc card for actuator with model no l120 to 10 make limitorque , terminal card for actuator with model no l120 to 10 make limitorque

CTN :45506168

01 Jul, 2026 2.26 Crore

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of temperature sensor-transmiter tt 001 hbs-5-4425-1 , temperature sensor/transmiter tt 001& 2 hbs-5-4425-2 , temperature sensor tt 002 hbs w/o no 64032 , temperature transmiter tt 002 hbs w-o no 64032 , carbon brushes 59 kw , bearing set 59 kw nu215 &nup215 , isolator switch 3 pole 25a , programmble controller , heating element , motor 22kw1138 , humidistat1163 , main switch ot80f31226 , ovrld gv3l501234 , pressure switch1980 , differential pressure switch adps03 50-500 pa , differential pressure switch adps05 200-1000 pa , differential pressure switch adps07 1000-4000 pa , actuator gga326.1 e-ha 230v , ac-dc converter 24v 5a , main switch ot63f3 , main switch ot100f3 , main switch ot125f3 , overload relay gv2-p16 9-14 a , overload relay gv2-rt08- 2.5-4 a , terminal connector 2 , 5 mm2 , terminal connector 4 mm2 , terminal connector 6 mm2 , terminal connector 10 mm2 , terminal connector 16 mm2 , terminal connector 25 mm2 , hmi display 7inch x2 pro new type , hmi cable cab 103-3m , plc module fx3u-485-adp-mb rs485 , actuator , pressure meter for citadel , compressor-motor flexible coupling insert 61-0920 , compressor rt450al-oil filter replacement kit 61-9916 , gasket copper-1-4inch flare , fan belt , dust filter , nbc cart stanag 44471157 , filter1414 , filter1424 , filter1430 , filter1436 , filter1442 , filter1448 , fan bearing , impeller1042 , filter2188 , filter2189 , filter2192 , filter2194 , motor bearings drive end type 6309 , motor bearings non drive end type 6204 , motor bearings non drive end type 6208 , motor bearings non drive end type 6210 , motor bearing plummer block 0048 , motor bearings - block blns0050 , motor bearings - block blns0030 , 2 stage combi g4 pre filter and f9 fine filter 600 m-3h , 2 stage combi g4 pre filter and f9 fine filter 900 m-3h , 2 stage combi g4 pre filter and f9 fine filter 1800 m-3h , 2 stage combi g4 pre filter and f9 fine filter 2700 m-3h , 2 stage combi g4 pre filter and f9 fine filter 3600 m-3h , flexible hose 50mm nb , flexible hose 65mm nb , flexible hose 100mm nb , flexible hose 25mm nb , flexible hose 32mm nb , flexible hose 25mm nb , flexible hose 32mm nb , thermostatic expansion valve body , replacement motor , replacement motor , compressor tool kit xjf 95s , gas charging hose , tempreture humidity meter

CTN :45512690

02 Jul, 2026 4.28 Crore

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vkpc006 c c - brush bracket assembly for 19 kw motor , fan , sw temp gauges , sight glass part no. 06001 avail.as com.as.kit-item-209 , set shut-off valve nw38 part no. 08398 , set of gaskets for condenser 20tr ac plant for ekm submarine , tube for evaporator for 20 tr ac plant for ekm submarine , 3 way isolation valve for pressure gauges , refrigerant piping fittings 20tr ac plant for ekm submarine , rear outer bearing cover , sw pressure gauges , temperature gauge 100 dial -30 to 50 deg c , starter cum control panel for20tr ac plant for ekm submarine , terminal connectors with din rail 35 wago 6 sq mm 282-101 , synthetic ref oil savsyn2068 , gasket cover window he side , gasket cover window filter side , gasket cover top hsg dist. block , gasket cover top hsg manifold block , nut hex m24x3 , bolt hex std m20x2.5x120l , fan , compressor discharge temp gauge , compressor suction temp gauge , mccb merlin gerin 160 a 4 pole ns160n 4p30640 coil 24v dc , starter card elmot for 45 kw dc panel , terminal block for 5.5 kw motor , core for filter drier , rubber bellows for sw pump discharge , rubber bellows for sw pump suction , shaft for sw pump , mechanical seal for sw pump , pressure gauge 65 dial -1 to 15 kg-cm2 for r134a , oil seperator danfoss oub 4 for 2 x 2.1 tr ref plant , sea water pump be pump a3610m for 2 x 2.1 tr ref plant , solenoid valve danfoss evrs3-24 vdc coil , thermo exp valve sporian w je-80 jc charge 1-5-8x1-5-8inch ods , rotor setl/d 1.45 part no. n0900408030 , metaflex coupling for compressor for 144 tr ac plant , valve check type 125 nb wafer type , core for filter drier sporian rc10098 , thermostatic expansion valve danfoss teat 85-33 , shock mount irmra akcc-400e , valve plate assembly part no-08436 , set shaft seal part no 08008 , set oil pump part no 08044 , set piston dia 70 part no 08035 , set gaskets part no 08072 , set connecting rod part no 08307 , set oilsump heat 80w 220-240v part no 08425 , set capacity regulator 24 v dc , set of v belts , oil separator danfoss oub 4 for 2 x 2.1 tr refrigeration pla , valve angle type 1-2inchntp(m) x 1-2inch flare , safety valve 1-2inchnpt m set pressure 12.5 kg-cm2 r134a , valve angle type 1-4inch ntp m x 1-4inch flare , thermostatic exp valve gfe-1-2jc charge 1-4inch x 1-2inch flare , thermostatic exp valve gfe-1.1-2jc charge 1-4inch x 1-2inch flare , vibration eliminator 5-8inch ods , vibration eliminator 1-1-8inch ods , temp switch danfoss rt34-25 to 15 deg c , hrc fuse link ge ns4 4a with nh type fuse base , control transformer tape wound 415 v/110 v 150 va , filer drier core , safety valve condenser , liquid injection solenoid valves , hex head screw m6x125l , lp-op cutout mp55r r12-r22 , horizontal shell and tube type condensor , brazed plates type direct expension r134a evaporator , safety relief valve for condensor , thermostatic expansion valve , open end spaner set , temperature transducer , compressure suction pressure gauge , compressore discharge pressure gauge , element complete with o ring , pump trailing pompe pollard type 100 pr-60-100 c-g-n , direction of control valve with manual override

Central Government/Public Sector

CTN :45519097

16 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : mandatory spare for patratu esp and sbmcc - acp 4000a, 0-25a, ctr 25/1a, 0-50a, ctr 50/1a, 0-75a, ctr 75/1a, nr_ i/c, dae_b/c_dae o/g, coupling relay _ 220v dc, support insulator _main bb, "support insulator_ vrtical bb", "spring charging mtr(2000a-4000a)", aux. contacts (2000a-4000a), "position ind switch (2000a-4000a)", "spring chrgd ind. switch 2000-4000a", trip ind. switch 2000-4000a, aru chute 4000a, fixed contact set 4000a, moving contact set 4000a, arcing contacts 4000a, charging spring 2000a to 4000a, ct metering 25/1a, ct metering 50/1a, ct metering 75/1a, ct protection 4000/1a, ct ps class 4000/1a, closing coil 2000-4000a, trip coil 2000-4000a, pt 415 3/110 3,50 va, cst 2.0 kva, cst 3.0 kva, cst 250 va, power cntr 25a_240vac, power cntr 16a_110vac, power cntr 32a_110vac, power cntr 115a_110vac, pc coil 25a_240vac, pc coil 16a_110vac, pc coil 32a_110vac, pc coil 115a_110vac, sfu 63a, sfu 125a, mccb 250a, mccb 400a, "double pole on/off switch_220vdc", "2p,2posi,l/r selector switch", "double pole on/off switch_240vac", "sp on/off switch for motor space htr", "4p 2posi,selector switch_240vac", "4p,2posi, a/m selector switch", "4p,2posi,selector switch_110vac", "double pole on/off switch_space htr", sp on/off switch for socket, ammeter selector switch, control fuse 6a, control fuse 10a, control fuse 16a, control fuse 63a, neutral link 20a, neural link 32a-63a, neutral link 200-400a, ind.lamp _red _110vac, ind. lamp _green _110vac, ind lamp _blue _110vac, ind lamp _red _220vdc, ind. lamp _green _220vdc, ind.lamp _red _240vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _green _240vac, ind. lamp _amber _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, push button, power fuse 6a, power fuse 16a, power fuse 25a, power fuse 32a, power fuse 63a, power fuse 125a, olr1.0-1.6a, olr 2.5-4.0a, "ind. lamp hldr _green_220vdc", ind. lamp hldr _red_220vdc, "ind. lamp hldr _amber_240vac", ind. lamp hldr _red_110vac, "ind. lamp hldr _blue_110vac", "ind. lamp hldr _green_110vac", busbar al flat piece_150x6, busbar angle _4000a, terminal block fixed, 32 pinmale housing tb, 32 pin female housing tb, 40 pinmale housing tb, 40 pin female housing tb, 16 pinmale housing tb, 16 pin female housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester, ammeter 10/1a, voltmeter 0-500v, nr_ i/c, dae_b/c_dae o/g, support insulator _main bb, support insulator_ vrtical bb, ct metering 10/1a, ct metering 5/5a, pt 415 3/110 3,50 va, cst 2.5 kva, power cntr 16a_110vac, pc coil 16a_110vac, isolator switch 25a, ammeter selector switch, 4p,2posi,selector switch_110vac, double pole on/off switch_space htr, sp on/off switch for socket, voltmeter selector switch, control fuse 6a, control fuse 16a, control fuse 25a, neutral link 20a, ind.lamp _red _110vac, ind lamp _blue _110vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, olr 0.4-0.63a, olr1.0-1.6a, olr 1.6a-2.5a, olr 0.63-1.0a, ind. lamp hldr _red_415vac, ind. lamp hldr _red_110vac, ind. lamp hldr _blue_110vac, ind. lamp hldr _yellow_240vac, busbar al flat piece_50x6, terminal block fixed, 32 pinmale housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester

Ms Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector