Latest ms arch Tenders | Government ms arch Tenders

Central Government/Public Sector

CTN :40500129

05 Jun, 2025 NA

Delhi - Delhi

Tender For supply of set of led-based loco signal exchange light, one set consists 01) led lights (red and green) qty. fo ur nos. 02) operating panel. qty. four nos. as per rdso modification no.rdso/2018/el/ms/0470 dated 18.06.2018 an d clw spec no. clw/ms/03/0670, alt-1 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40503645

19 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For provision of dual operator vdu in lieu of existing panel/vdu at 4 ei stations (stm, ov, tzd, pei) in ms-vm section & carryingout outdoor work as per rdso standardization.

Central Government/Public Sector

CTN :40500644

17 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of complete panel - a, panel - c ( without driver display unit ) & panel- d along with all equipments , hardwares , wiring /cabling for wap-7 , note- panel -c will be supplied with complete assembly mounting on its plate as per spec.0453 alt. b as per spec. clw/es/3/0239/d, 0 240/b,0241/b, 0453/b, and clw letter no.c- d&d/t/47 dated 08.08.2019 & rdso ms no. rdso/2022/el/ms /0489 rev.0 and blw letter no. blw/d&d/wap-7/em/cubicle dated 03.05.2023 & 09.05.2023 [ warranty p eriod: 30 months after the date of delivery ]

CTN :40477659

16 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - washer for nozzle holder , rubber bush , nut for clamp , washer(p-9) , spanner oj fixed be nominal a f mn 7x8 , washer for sump (os sl no-76) , spanner de 10 x 12mm , gasket nozzle(os em oblique r655 dt 01.02.19) , split pin 1 by 8 dia (os sl no-43) , joint(ms sl no-06) , valve split cone (400 by 402 engine p-11 sl no25) , spnt ojde 10x13 mm by 10x11mm , de spanner 3 by 16 x 1 4 , dowel shot (os sl no-19) , nut 1 by 2 bsf (os sl no-42) , valve cap , dowel (os sl no-59) , normal nut(ms sl no-18) , key woodruff(ms sl no-68) , copper washer(p-9) , stud 3.8 bsf for manifold(ms sl no-15) , bolt 3x8 bsf self locking(chicago) , joint(ms sl no-8) , valve spring coller , nyloc nut thin(ms sl no-14) , sealing ring , bolt 5 by 16 bsf , stud 1 by 2 bsf , screw f by w to adapter , stud 5 by 16 bsf , plug(ms sl no-07) , stud 3 by 8 inch bsfx1.625 inch long , bolt 5 by6 bsf (os sl no-13) , key drain plug , lock plate , de spanner 5 by 16 x 3 by 8 inch , ce bush (ashok leyland p-107 sl no-26) , lock nut(ms sl no-24) , ball end(ms sl no-25) , oil gallery plug , gasket (os sl no-298) , gasket (os sl no-297) , screw driver 200mm , hose 7 by 16-0.45 mtr , hose 9 by 16-0.33 mtr , jubilee clip (os sl no-245) , stud 3.8 bsf for manifold(ms sl no-17) , bush (os sl no-172) , seal insert rubber (os sl no-95) , hose 9 by 16-0.8mtr , key (os sl no-47) , clamping piece (os sl no-99) , clamp(p-25) , rocker lever bush(ms sl no-26) , elbow (os sl no-240) , stud 1 by 2 feet bsf (os sl no-12) , o ring(chicago260) , hose 9 by 16-1 mtr , 6 inch cutting plier , straight coupling(p-10) , gasket , joint for side cover rh front (os sl no-160) , screw driver engr 300mm(ces-45) , hose 9 by 16-1.5mtr , pipe clip (os sl no-253) , o ring (cps-260) , small end bush (os sl no-38) , stud 1 by 2 feet bsf (os sl no-10) , o ring(chicago260) , pressure gauge , hose 7 by 16-1.2mtr , oil seal (ms sl no-66) , pliers side cutting , push rod(ms sl no-10) , gasket , injector clamp , oil seal (os sl no-222) , hose , bolt 1 by 2 bsf (os sl no-41) , straight flex hose (os sl no-242) , driving plate (os sl no-86) , radiator outlet hose(ms sl no-190) , s a of rocker lever rh(with bush) , hose(os sl no-243) , sealing washer (os sl no-232) , hammer 750 gms , sleeve (os sl no-49) , insulator bush (os sl no-230) , split pin (os sl no-87) , s aof dipstick guaide , hose 7 by 16-02mtr(cps-260 instrument panel and pipin , fuel filter (os sl no-91) , s a of dipstick (os sl no-250) , diaphragm(chicago260) , breather(p-9) , 3 by 4 inch female coupling , oil level sight glass (os sl no-299) , rocker bracket(ms sl no-28) , insulator bush (main) (os sl no-233) , insulator plate (os sl no-234) , seal nut spanner , hose (os sl no-239) , cyl hd cover gasket , thrust washer , oil flinger (os sl no-48) , button-stop cable(p-10) , non return valve fuel (os sl no-107) , s a of rocker lever lh(ms sl no-23) , grease gun , cable for rpm meter(ms sl no-186) , anti-vibration pad (cps260 instrument panel) , hose 9 by 16-1.8 mtr (os sl no-328) , ball valve rc 3 by 4 inch (cps-260 page no 14) , elbow coupling(p-29) , oil pump assy , crank shaft oil seal(ms sl no-50) , seal solenoid terminal (os sl no-229) , oil seal service kit(cps-260) , s a of injection leak of pipe , rubber elbow (pneumatic air system page18) , pressure gauge , thermostat western thomson(ms sl no-111) , low oil pressure switch(ms sl no-05) , pressure plate (os sl no-217) , belt driving , temprature gauge(ces-12) , hose assy rubber pneumatic 20mm 1d x 3.05m lg , claw coupling(os em r655 dt 01.02.19) , con rod bearing set (chicago) , hose pipe assy 1 by 2 inch x 63 inch , con rod bearing set u oblique s 1 (al-p-15 by 22) , hose pipe assy 3 by 4 inch x 96 , air & oil separator (os sl no-248) , suction filter (os sl no-112) , rain cap(p-25) , hose pneumatic 3 by 4 inch mk2 10 feet , composite valve seat kit , s a of seal housing (os sl no-56) , kit valve guide & valve seal(os sl no-26) , inner cartridge , hose pneumatic wi

CTN :40466705

06 Jun, 2025 9.00 Lacs

Barwaha - Madhya Pradesh

Tender For furniture suppl- "table 5x3 in novapan, 3 drawers, 1 locker18mm bulk top, 9mm work frame, 12mm panel" "2 iron office cupboard 6ft in20-20 gauge stainless steel 90kg" , "tea table wooden3x2.5, 18mm buried glass, 12mm pu polished cream babul, 4 pvc feet in peg" "iron rank 6ft in, 6 compartments1x1x4 wide, 1ft deep, 6ft long" "iron rank 5ft in, 5 compartments1x1x4 wide, 1ft deep, 6ft long" , "center table glass high quality12mm ms frame, 18mm toughened glass, pvc parcel" , "multi seater bench three seater steel68d x 180w x 78 inch" , "tea table glass12 mm ms frame, 18 ms toughened pvc percale" "iron table 4x2, 2 drawers, 1 locker12 mm frame ms, 18 m gauge cabane, 18 mm bulk top" , "plastic chair heavymango wood colour frame vanegan plastic" , "revolving chair full back bigas per sample" , "iron office cupboard 4 feet small20-20 gauge stainless steel 90 kg" , "revolving chair half back for computer operatoras per sample" "sofa set steel three seater165 id x 50.8 bl x 81.3 h frame 55 kg l size" , "plastic stoolmango wood colour frame vanegan plastic" , "wooden computer table 5x3 drawers, locker25 mm bulk laminated polymac board ply, 18 mm cabin ply frame, 4 m ribbon strip" , "visiting chairstand steel 52.9 cm, 1 mm bulk top, pvc cover on 12 mm plywood back" , "center table25 mm bulk ply, 15 mm board, 9 mm frame with melamide polish" , "bouquet cupboard for keeping books, books20-20 gauge steel 12-18 mm glass work" , "steel chairas per sample" , "wooden table230 gsm plastic sheet, 18 mm wood frame with pv coating rubber wood" , "wooden cupboard 6 ft20-20 gauge stainless steel 90 kg" , "wooden table 5x3 in iron angleisi mark" , "corner sofa (leather) t t - table complete with glasscomplete 32 density front foam, 28 density back home, 18 mm thok ply, 06 mm panel, 12 mm frame babul polish, 04 mm pvc pads" , "corner sofa (cotton fabric heavy) t - table complete with glasscomplete 32 density front foam, 28 density back home, 18 mm thok ply, 06 mm panel, 12 mm frame babul polish, 04 mm pvc pads" , "corner stool glassisi mark" , "bed 6x6.5 (wooden)isi mark" , "bed mattress 6x6.5isi mark" , "sofa set 5 seater (leather)isi mark" , "sofa set 3 seater (leather)isi mark" , "sofa set single seater (leather)isi mark " , "sofa set 5 seater (cotton fabric heavy)isi mark " , "sofa set 3 seater (cotton fabric heavy)isi mark " , "sofa set single seater (cotton fabric heavy)isi mark " , "elciner sofa electricisi mark "

CTN :40343995

31 May, 2025 40.06 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : tender for supply of afdss for topa - expellant gas cartridge 200gm , expellant gas cartridge 300gm , nitrogen cyl. assembly , dcp cylinder 20kg , dcp cylinder 15kg , pilot cyl. assy. f/manual operation , cyl. cap w/ pneumatic manual operation , inner cylinder for main cylinder , dry chemical powder 5kg per packet , sensor cable assy. (100 ft) , control panel assy. , horn unit , rupture disc assembly , harness cable assy. complete w/connector , sensor end assembly , nozzle conical (brass) , dust cap for nozzle , hose assembly 1/4 inch (450mm) , hp hose assembly 1/4 inch 33 inch long , hp hose assy. 1- 1/2inchx3ft , hp hose assembly 1/2inch 4 (1.2m) long , hp hose 1/2 inch 5 feet (1.5 mtr) , hp hose assembly 2.1 m long , hp hose assembly 2.75m long , 3/4 hose assy. 2000mm , 3/4 hose assembly 9ft , clip for sensor wire , ms tee 3/4inch bsp , mounting block for hoses , p clip 20mm for hose mounting , stand for 15 plus 15 total (30kg) cylinder , stand for 20kg cylinder , bracket for nozzle , safety clip , fuse holder with fuse , 1/2 hydraulic elbow , sensor cable , mounting block for hoses , actuation device , co2 expellant gas cartridge 300gm , sensor end assembly for zone wise , hp hose assembly half inch 5 long for zone wise , hp hose assembly half inch 7 long for zone wise , harness cable assembly with connector , sensor end assembly for zone wise , control panel asm for two zone system , dry chemical powder , rupture disc assembly , clip for sensor wire

CTN :40458040

12 Jun, 2025 NA

Guwahati - Assam

Tender For procurement of hardware and building material items for assam police headquarters, assam, ulubari, guwahati - alum. tower bolt 100mm, alum. tower bolt 125mm, alum. tower bolt 150 mm, alum. tower bolt 200mm, alum. handle 100mm, alum. handle 125mm, alum. handle 150 mm, alum. handle 200mm, alum. l. drop 200mm, alum. l. drop 250mm, alum. l. drop 300mm, alum. eye hook 150mm, alum. eye hook 200mm, alum. eye hook 300mm, alum. plain sheet 1000mm width, alum. plain sheet 1220mm width, alum. altras 4", alum. decorative door handle 250mm, alum. paint, a.c. sheet 4mm 1.22 m x 1.22m, allumn. channel 20 x 20mm, allumn. pipe 19mm dia, allumn.pipe 25mm dia, antitermite, alluminium net(mosquito proof ) 1220mm width, adjustable steel cast hand plane (28 cm), black puty ( shalimer), blue (indige), brass handle 100mm, brass handle 125mm, brass handle 150mm, barbed wire, bucket ( plastic) 12", bucket ( plastic) 14", bamboo jharu with long handle, brahmaputra sand ( p/ cm), bricks 1st class ( 100 nos.), bricks 2nd class ( 100 nos.), bhuluka bamboo, bijuli bamboo, balsa (tata)/ agro, boulder ( all sizes ( p/cm), brass screw 50mm, bleaching powder ( best quality) (1kg.), brass tower bolt. 100mm, brass tower bolt. 125mm, brass tower bolt. 150mm, brass tower bolt. 200mm, brass hinges 125mm, brass hinges 100mm, brass hinges75mm, brass hinges 50mm, coconut rope, chandros ( polishing articles ), chizel ( standard size), cement primer, cheni 300mm, cement paint., curtain spring hook, coconut brass, conduit pipe 25mm, cement ( 50 kg. bag ), coarse sand (5.00 cum), chitronala 100 ml., chemical for fogging machine, chair wheel 25mm, da ( assamese), drawer lock (godrej), dendrite (per/ kg.), drill machine ( full set) best quality (hamer), distemper all shades, door ring brass 50mm, damp proof liquid ( best quality ), drawer chenel 12", drawer chenel 14", drawer chenel 16", drawer chenel 24", drill machine machine bit 3mm to 13mm, enamel paint ( all colour), expanded matel net 1.22 m width, fevicol, file 25mm ( carpentar tool), floor door stopper (brass ) best quality, flax printing, floor cleaning brush with handle (best qlty.), garu mati ( polishing article), glass cutter, g.i. screw 20mm, g.i. screw 25mm, g.i. screw 40mm, g.i. screw 50 mm, g.i.iron screw 63 mm, glass pin, glass panes ( frosted)4mm, glass panes (plain) 4mm, glass panes (plain) 5mm, glass panes (plain) 6mm,8mm,10mm, g. i. plain sheet 1000 mm width, g. i. plain sheet 1220mm width, g.i. ridging 6, g.i. ridging 10, g.i. l. hook, g.i. cap with bitumeneous washer, gum, g.i. wire, g.i. black binding wire, g.i. mosquito net, coconut rope, g.c.i. sheet 0.63mm, glosign board 500 x 5 kg., grey chemical, hamer all size, halical door spring, hedge cutter ( heavy), hydraulic door closer (isi), hessain cloth 1220mm width, hand pad ( carpenter tool), harpic 500 ml., hit spray 500 ml., hand saw with long teeth both side handle for log cutting sandard size ( heavy duty), looking glass mirroe 4mm , 6mm, iron tower bolt 150mm, iron tower bolt 200mm, iron handle 150mm, iron l. drop 250mm, iron l. drop 300mm, iron eye hook 300mm, iron nails, ironbrass ( best quality), iron jack plain 30 cm ( carpenter tool), iron hinges 100mm, iron hinges 75mm, iron hinges 50mm, iron hinges 40mm, iron angle frame ( 50 x 50 x 6mm), jungle cutter ( tarowal), jati bamboo, lime brass, lime, lock & (heavy), mortice lock 6 liver, metal primer, mansion floor polish 500 gm), m.s. rod 6mm, m. s. rod 8mm ( torsteel), m.s. rod 10mm to 16mm ( torsteel), measuring tape 30 mtrs., measuring tape 15 mtrs., magnet for cup - board, nut & bolt, netlon mosquito proof net 1220 mm width, nepthaline ball, odonil, plywood board 4mm, plywood board 6mm, plywood board 12mm, plywood board 19mm, plywood board 25mm, plywood board 40mm, painting brush 100mm, painting brush 75mm, painting brush 65mm, painting brush 50mm, painting brush 40mm, plastic paint all shade ( top quality), phenyl ( black) 500 ml, phenyl ( white) 500 ml., panel pin 25mm, panel pin

CTN :40469557

13 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - supply of washer(fig-130) , spring washer m12 (r.h)(ctlg fig-40) , bolt , 1 by 2 inch sq dr bi hex socket 27mm , switch panel 4wd 4wd actuator , ring snap throttle shaft , clamp , o ring (ctlg fig-2210) , o ring , piston , screen & cap filter , stud , gauge fuel (fig-12) , o ring , cable assy , hose , link ball , collar (fig-46) , cable , ring comp , shim assy , element , check valve , elbow , piston seal , flap rust 1300x24 , shim , bushing , shim , lamp , oil seal (fig-63) , cable (komatsu motor grader page 21-36) , guide , filter lub oil assy , cable assy , seal , belt water pump , service kit , hose(fig-70) , hose , bearing , shoe assy (chapter parking brake) , cushion assy , blade lift cylinder seal kit(fig-90) , tube compressure air inlet , cover assy (fig-19) , bearing , cyl kit (service kit) , valve shut down , service kit master cyl repair kit(ms sl no-697) , steering cyl kit , seal kit (fig no-96) , cable assy , techo service meter , seal kit (fig no-98) , cable assy , switch solenoid(44tc) , cable assy , seal kit (fig no -97) , seal kit(fig-99) , cable(fig-05) , unloader valve with tyre inflator , repair kit for scarifier cyl , guide , cable , cable , wheel cyl service kit , slave servo(ctlg fig-60f) , valve assy service kit , brake piping (2 by 4) air over hydraulic , cutting edge(fig-130) , propeller shaft assy , cylinder assy(komatsu motor grader page 24-23) , condensing unit & auto drain valve , wheel cyl assy (oem) , pilot check valve assy (fig no-108) , reservoir 10 litre(fig-60g) , steering cylinder(mg605r2 fig no 89) , steering cyl assy(fig-89) , kit , master cyl assy (fig-56) , hyd control valve (rh)(ispl fig-103) , hyd control valve (lh)(ispl fig-104) , leaning cyl assy (fig-86) , joint assy , propeller shaft , starter motor , blade shift cyl assy (fig-83) , shoe assy , valve assy

CTN :38877819

28 May, 2025 NA

Vadodara - Gujarat

Tender For bid to ras supply of 415 v, 50 hz, 500 kva 400 kw dg set , synchronizing cum changeover panel , emergency power control center , ms self supported chimney structure , different type and size of control cable and piping material. , supply of miscellaneous items like exhaust stack system , installation, commissioning, integration, testing at site

CTN :40319578

02 Jun, 2025 18.23 Lacs

Budaun - Uttar Pradesh

Tender For corrigendum : for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-budaun (semi turnkey). - cartage of following material from store center nawada, budaun to je store/je store to site of work including loading & unloading at both ends maximum distance up to 30 km., a) pcc pole 8.5 mrt long/st pole 11 mtr long., b) 11 kv xlpe cable of 3x70/3x120/3x185/3x300 sq.mm., c) 250/400 kva t/f., d) 11 kv ct/pt unit of different size, e) 11 kv jointing kit of different size, f) 11 kv pilfer proof cubical of different size, g) lt abc cable of size 1x16, 3x50, 3x95, 3x120 sq.mm., cartage of line material (11 kv pin insulator, disc insulator, stay set, cross arm, gi wire, earthing rod, ms channel, ms angle, etc) from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 30 km., cartage of 10 kva & 25 kva transformer from store centre to site of work including loading & unloading at both site, the work of safe carriage 11 kv o/g vcb store center nawada budaun to work of site distance up to 0 to 30 km including safe loading & unloading., cartage of 63 kva to 100 kva transformer from store centre to site of work including loading & unloading at both site., earthing of each 11 kv line pole & t/f properly after drive of electrodes if size 20mmx250mm and connection the earthing point with gi wire., erection of pcc pole 8.5 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., erection of stp pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., fabrication and fixing of all 11 kv h.t/l.t. line accessories., erection of double pole on pcc pole 8.5 mtr/stp 11 mtr. long after digging of pit of required size including fabrication and fixing of top channel, droper channel & base channel alongwith, fixing all 11 kv accessories, fuse set 11 kv pin insulators and making connection properly., construction of new plinth for 250/400 kva as per uppcl norms, mounting of 250/400 kva t/f on plinth as per uppcl norms, providing and fixing wiremess fencing for 250/400 kva, erection/installation of following of vcb o/g in consumers site and cable joint of the panel to including earthing, grouting, anchor bolt of panel of making/repairing of pocket for cable to insert in panel form trench and fixing taping of busbar with wiring for ac,dc connection including providing ac and dc supply., chemical earthing for 250/400 kva t/f neutral and body complete, chemical earthing for vcb o/g, mounting of 10 & 25 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of 63 & 100 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of ct/pt unit with proper jumping of ht side and fixing of cable on lt. side of meter cubical properly, fixing of meter cubical as per uppcl norms, making a section pole to exist pole after fabrication & fixing of t channel fixing of all 11 kv accessories., erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming., laying lifting stringing of proper sagging of acsr weasel/rabbit/dog conductor for 3 phase, 3 wire 11 kv line including binding & jumpering properly., laying lifting stringing of proper sagging of 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm., laying of underground 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm. sizes with open trench by brick & sand as per uppcl norms., filling the 11 kv jointing kit (joint kit providing by c

Ms Arch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector