Latest ms bearing plate Tenders | Government ms bearing plate Tenders

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45515791

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - condemned 5 nos icf bogie/trolley frame with bogie bolster released from condemned & sold coaches. qty- 5 nos. list of excluded items of each condemned bogies: (1) wheel set with axle and roller bearing and axle boxes with axle box cover- 2 set, (2) all sorts of helical spring (12 nos spring per bogie)- 1 set, (3) brake cylinder (bmbc)- 2 nos. all the excluded items as mentioned above to be returned by the purchaser to the custodian during return over programme.

CTN :45257491

22 Jun, 2026 2.30 Crore

Sibsagar - Assam

Tender For corrigendum : supply of spares for dresser rand make gas compressor unit #6, #7 and #8 of phase-ii power house, lakwa thermal power station (ltps), maibella, charaideo - cross head rds (with bushing), ring piston 23" non combo, ring piston 13" non combo, ring packing, ring packing, suction valve 200ckt, seat 200ckt, valve plate 200ckt, wafer spring 200ckt, closing spring, suction valve 147cht, seat 147cht, valve plate 147cht, wafer spring 147cht, closing spring 147cht, discharge valve 200ckt, seat 200ckt, valve plate 200ckt, wafer spring 200ckt, closing spring, discharge valve 147cht, seat 147cht, valve plate 147cht, wafer spring 147cht, closing spring 147cht, bearing main, connecting rod bearing, assembly piston and rod, ring piston 23 combo, ring piston 13 combo, yolk assembly, stud cylinder frame, nut cylinder frame to yoke, connecting rod, gasket hp valve seat, gasket hp valve cover, gasket lp valve seat, gasket valve cover, cartridge filter, rexnord@thomas@disc couplings disc pack type amr700, rexnord@thomas@disc couplings hardware kit* amr700(*1 set of hardware kit consists of 16 nos. each of bolts, locknuts and washers.)

Central Government / Public Sector

CTN :45237609

18 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : tender for supply of crosshead u/n dr2mlh63118ag1 202-k2cn , main oil pump u/n dr2mlh54244cg2 , cyl liner flnd 1 stg u/n dr2f30844ap1 , piston asmbly 1 stg u/n dr2mlf33099g7 , rod piston asmbly 1stg u/n dr2mlf33090g2 , cyl liner rplcmnt 2 stg u/n dr2f30841ht2 , piston asmbly 2 stg u/n dr2mlf33096g9 , rod piston asmbly 2stg u/n dr2mlf33086g8 , bearing main u/n dr212546347im , retainer rod bearing u/n dr2r83291b , gasket pump end top u/n dr2h63151b , gasket rod bay top u/n dr2h63150 , gasket sp bay top u/n dr2h63149b , gasket drive end top u/n dr2h63148 , pin dowel u/n dr217a13a461 202-k2cn , shoe thrust u/n dr2r86224im 202-k2cn , ring cshaft oil u/n dr21h61734c , bolt con rod u/n dr2r86223im 202-k2cn , pin dowel u/n dr217a13a293 202-k2cn , bushing connrod u/n dr2h63112im , bearing conn rod u/n dr21h63262aim , gasket fr d e u/n dr2h63173im 202-k2cn , pin roll u/n dr225a13c327 202-k2cn , cap screw u/n dr235a2d335 , pin roll u/n dr225a13c293 202-k2cn , retainer seal u/n dr2r86270 202-k2cn , ring cshaft oil u/n dr21h61734c , o-ring u/n dr220a11cms1016im , gasket frame extension p/n dr2h63135p1 , o-ring u/n dr220a11cms1016im , gasket cover yoke u/n dr2r87749 , gasket cover yoke u/n dr2h61770p1 , o-ring u/n dr220a11em472 , gasket partition packing p/n dr2w96734 , scrapper oil u/n dr2mlh57757eg4 , packing plt partition u/n dr2mlh65188eg1 , o ring u/n dr220a11ems1041im , gasket u/n dr2r82105ad , rod pkg case 3.25 u/n dr2mlh65180phlg1 , vlv inlt asmbly 1stg u/n dr2mlh44443xl3 , vlv discharg 9.50magxf u/n dr2mlh4443xl3 , gasket u/n dr2r82105j , gasket flange closure u/n dr2r83640t5 , rod pkg case 3.25 u/n dr2mlh65180bhlg2 , vlv inlt asmbly 2stg u/n dr2mlh44443xh4

Central Government/Public Sector

CTN :45515778

29 Jun, 2026 NA

Wadi - Karnataka

Tender For auction sale of depot ferrous scrap - scrap condemned unserviceable released iiird class girders , girder bearing, stiffener, plates, x frame etc. the lot material is located at 05 different locations & lot material will be handed over for cutting and delivery in the same sequence only as follows:- (01) ohe mast no. 602/4-6 dn (wadi), qty = 5.07 mt (approx)., (02)at sse. p way.sdb office compound premises, qty = 28.93 mt (approx), (3) mr-hqr ohe mast no. 582/27-29 up line, qty = 06.02 mt (approx)., (04)near railway magistrate mobile court klbg, qty = 20.47 mt (approx), (05) klbg-bbd ohe mast no. 567/7-8 dn line, qty =12.66 mt(approx). total lot qty - 73.15 mt (approx). note:- 1. bidders/purchasers should visit the lot locations and ensure to see the lot material & its approach before bidding for the lot . after auction no representation shall be entertained. 2. purchaser should clean the lot location/premises/site and ensure to remove the debris/kachra at the site on the last day of each delivery and before the entry of vehicle at the lot location/site/premises failing which lot material located at next location (i.e. as per sequence mentioned above) will not be handed over for cutting and delivery to the purchaser.

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Central Government/Public Sector

CTN :45498664

01 Jul, 2026 2.54 Lacs

Jhunjhunu - Rajasthan

Tender For tender for supply of electrical items - bearing deep groove 6206zz skf sbl 206 dd , lock pad harrison 70 mm , capacitor 2 5 mfd x 440v , switch piano type made of tough non ignitable moulded insulating material , switsh tumbler single pole way quick make and brake cover and base of tough , plug top three pin of tough non-ignitable insulating mate- rial with bronze pins , plug top three pin of tough non-ignitable insulating mate rial with bronze pins , switch tumber two pole way quick make and brake cover and base of tough , three pin socket surface type non shutterd cover of tough non ignitable material , three pin socket surface type non shutterd cover of tough non ignitable material , heater element rod 10 inch 1000 watt , pvc fine adhesive tape suitabl for l t insulation , starter tube light glow lamp t with radio interferance suppre ssing capacitor brass , starter tube light glow lamp t with radio interferance suppre ssing capacitor , 36 40 watt fluorescent tubular discharge lamp suitable , hydrometer 1100 1300 range , araldite in 180 gm tube , m seal c j compound n type , gls incandescent lamp coiled filament in clear finish bayonet cap , high speed steel hack saw blade , spring contact assy , spring for pomel contact in loco battery , sand paper fine , brass pendant lamp holder b c type with shade carrier ring , hack saw frame chromium plated tubler , de electrical padlock with nylon shackle key , tags made of white special grade pvc sheet , bag canvas for tools , electrical screw driver insulated cellulose plastic handle confi reming to is 844 1979 5 x200 mm product 937 i make taparia , double end open spanner set of twelve pieces , pin slide wrench , double end ring spanner chrom vanadium steel chrom plated , plier combination insulated 8 inch 200 mm , grinding wheel for hitachi disc grinder model , 1 2 square drive socket set complete ranging f , two way rotary switch two pole 911213

CTN :45483369

20 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of high tensile mild steel scissor linkages expendable to length 22 ft and width of 16 ft with vertical clearance 10ft , heavy duty industrial rubber wheel system to bear weight upto 1 point 5 to 2 ton with locking system and guide rod of 22 ft for linear movement , high grade tensile fastners to secure the frame work structure of collapsible shelter , heavy duty rust protected mild steel square rectangular hollow section prefabricated pillars to support frame size 22 ft length x 16 ft width x 10 ft height , ball bearing for track roller movable platform wheels , heavy duty tapered oblique roller bearing for structural scissor joint to absorbs high quail torque collapsing and expanding

Central Government/Public Sector

CTN :45178202

16 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

CTN :45466089

17 Jun, 2026 80.00 Lacs

Barmer - Rajasthan

Tender For supply of iec printing-multicolor printing on 120 gsm chinar art paper; charges for hoarding installation, mounting, pasting, and adhesives; card sheet printing (posters and other materials) on 300 gsm jk art card. a4 poster printing (multi-color, a4 size, 90 gsm a-grade art paper); sunboard (3mm with multi-color vinyl printing); flex (300 gsm, including iron frame/stand made of 5kg iron pipe per 20 feet); single-sided pamphlet printing (sirpur color paper, 60 gsm, 18x22/4 size); single-sided pamphlet printing (sirpur color paper, 60 gsm, 18x22/2 size); single-sided pamphlet printing (sirpur color paper, 60 gsm, 16x26/2 size); sticker (plastic/heavy-quality self-adhesive sheet, 120 gsm, a4 size); ta/da form for training (single-sided printing, sirpur paper, 70 gsm, 18x22/2 size); id card (hard plastic with printed lanyard bearing the department name; photo to be taken on-site); training module printing (single-sided, sirpur paper, 70 gsm, 18x22/4 size); wall painting (premium quality plastic paint, per sq. ft.); wall painting (premium quality oil paint and slogan writing); training certificate (8.50x11, 300 gsm); training (8.50x11, 300 gsm); color (a4 size) - 50 pages; color (a4 size) - 100 pages; color (a4 size). 150 c.l.d. color (.4 l.d.) 200 l.d.l.d. color (..4 l.d.) 250 l.l.d. camera with 6x6 mm.

Ms Bearing Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector