Get complete information related to latest Ms Block Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Block Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Block Tenders.
Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all
Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade
Tender For supply of set of elastomeric sealing rubber for 3-phase locomotives as per clw specification no. clw/ms/3/034 alt-6 or latest consisting of 03 items : (i) gasket for lip as per clw drg. no. 1209-18.406-091 alt-3 or latest, qty- 16.2 meters (ii) self gripping sealing rubber as per clw drg. no. 1209-18.406-089 alt-5 or latest, qty- 53 meters for wap-5 loco and 62 meters for wag-9/wap-7 loco (iii) self gripping sealing rubber as per clw drg. no. 1209-18.406-088 alt-2 or latest, qty- 01 meter.
Tender For supply of safety bracket assembly for bp/fp angle cock for three phase loco as per drg. no. wcr/tkd/el-3-sd-006. one set consisting of 6 items (qty-22 nos.) (1) ms plate 560x150x18 mm thick, is:2062 = 2 nos. (2) ms channel 430x150x6 mm thick, is:808 = 04 nos. (3) ms plate 150x75x10 mm thick, is:2062 = 04 nos. (4) hex head bolt 120, 60 mm length 13 mm threaded with nut, property class 10.9, is:1364 & 1367 = 04 nos. (5) ms flat washer ms, is:2016 = 04 nos. (6) ms spring washer m-20 b, is:3063 = 04 nos., total items per set = 22 nos
Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in
Tender For corrigendum : supply and installation of summation meter (02 nos.) and its releated items (abt meter, cubicle etc.) with supply and laying of 2 core 2.5 sq.mm. control cable and other related work for ms infosys limited plot no 01 sector 85, noida for rele
Tender For supply of repair and maintenance of sre items : : - replacement of utp cable , replacement of camera , replacementof ups 1 kva battery , repair of switch 8 port , replacement of nvr with 4 tb hdd , repairing of security cabin door frame material top finishing , replacement of chain link fence nut bolts sand cement graded stone aggregate galvanized strand steel barbed wire chain link fencing size of mesh ms angle iron fencing post and flat iron
Tender For corrigendum : erection spreading and fixing of deck sheet at plus122 mtr elevation at main pipe rack on labour contract basis for msblock balance works panipat refinery expansion project of iocl
Tender For corrigendum : application of various paints on steel surfaces of structural components including supply of paints as per the specification of tkuipl on subcontract basis for msblock balance works panipat refinery expansion project of iocl