Latest ms board Tenders | Government ms board Tenders

State Government

CTN :45732637

02 Jul, 2026 49.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

Central Government/Public Sector

CTN :45492036

06 Jul, 2026 NA

Kota - Rajasthan

Tender For corrigendum : special repair for replacement of ci/ gi water pipe line into di (ductile iron) pipe line in gtc area at mil stn kota

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.

Central Government/Public Sector

CTN :45702792

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98050126: cond. & u/s. ms/ci/gi and scrap consisting of grs full box, grs half box, relay pannel box, bars, ms rod/angle/ channel/ pipe, cut pieces of ms flat, bm box, tie bar fencing, pipe fittings, coupling hook,tension rod, tmt rod,plate, p/m cover, door broken parts, ms stand, slide cover, ms/gi nut, bolt, lock nut,avtm, clamp, washer, lc gate parts and tap, mast, ms/gi telephone/light pole, gate, valve, cover hook, universal axle counter box, axle counter base plates, gear case,pump case, flat rod,rack, rottery key, grill, fencing, ladder, battery boxes, frames,fob frame/mesh net, ms boxes, ring, ct boxes, ground connection, beaters angle different sizes, da box, d bracket, stay adjuster, battery stand, rack, ci components , ladder platform, cls /signal post with or without base, fabricated rail used for fencing purposes, foot step, brake beam, ms rope, ms bond,ms board,gate,cut off angle cock, gravity cock, ms rod cut pieces, flushing valve, door closser, ms loco parts,surface base,pure iron flat, beam, and such other similar ms items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery (2) crane/jcb loading permitted (3) segregation is not permitted, (4) cutting permitted strictly up to loadable size only at the time of delivery (5) delivery should be made location wise. purchaser should be permitted to take the materials from the next location after clearing the materials of one location. (6) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. location: in two locations :(1) bin-w-4 (2) w18 to w-23, near witness shed of scrap yard/ssd/ptj.

Corporations/Associations/Others

CTN :45673452

01 Jul, 2026 1.23 Lacs

Multi City - Karnataka

Tender For supply of material to repair of cast iron in jackwell in water supply unit alur tp - ci double flanged pipes 150mm dia 6 feet length, ci double flanged pipes 150mm dia 3 feet length, providing ductile iron push on special confirming to is 9523 2000 - all d.i. flanged mj collar 150mm, providing ductile iron push on special confirming to is 9523 2000 - all d.i. flanged mj collar 200mm, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as pe is 694-1990 with isi marks and as per its latest amendments for 1x3x4 sqm

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

Ms Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors