Latest ms chain Tenders | Government ms chain Tenders

State Government

CTN :45245312

05 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For name of work: e-tender for the procurement of materials for use in nurseries under the units of the sagar social forestry circle - 1” braided water hose pipe (length: 30 meters) , monoblock motor: 1 hp, 2-phase , monoblock motor: 2 hp, 2-phase , monoblock motor: 3 hp, 3-phase , monoblock motor: 5 hp, 3-phase , monoblock motor: 7.5 hp, 3-phase , submersible motor: 1 hp, 2-phase , submersible motor: 2 hp, 2-phase , submersible motor: 3 hp, 3-phase , submersible motor: 5 hp, 3-phase , submersible motor: 7.5 hp, 3-phase , submersible motor: 10 hp, 3-phase , submersible pump: 2 hp, 2-phase , submersible pump: 3 hp, 3-phase , submersible pump: 5 hp, 3-phase , submersible pump: 7.5 hp, 3-phase , submersible pump: 10 hp, 3-phase , c-clamp type hdpe pipe (length: 20 feet), diameter: 1.5” , c-clamp type hdpe pipe (length: 20 feet), diameter: 2” , c-clamp type hdpe pipe (length 20 ft), dia 2.5" , c-clamp type hdpe pipe (length 20 ft), dia 3" , t-bend 2.5" , l-bend 2.5" , t-bend 3" , l-bend 3" , end cap 2.5" , washer 2.5" , washer 3" , diesel engine pump 5 hp , diesel engine pump 7.5 hp , hdpe rolled pipe, dia 1.5" , hdpe rolled pipe, dia 2" , hdpe rolled pipe, dia 2.5" , hdpe rolled pipe, dia 3" , plastic nozzle for sprinkler 3/4" , brass nozzle for sprinkler 3/4" , g.i. riser pipe for sprinkler 3/4" , g.i. socket for sprinkler 3/4" , g.i. foot button for sprinkler , g.i. socket 3/4" , covering/cladding material: structure covered with uv-stabilized hdpe / polycarbonate multilayer sheet , screen filter for fogger system , booster pump , temperature meter , 16 mm lateral line , 4-way fogger , exhaust fan (30" dia) , honeycomb pad for cooling system , g.i. round pipe 1" , g.i. round pipe 1.5" , g.i. round pipe 2" , g.i. round pipe 2.5" , iron sieve (for sand) 3x6 ft (with wooden frame) , dhanzyme fertilizer , d.a.p. , n.p.k. , chlorpyrifos 20% ec , fungicide (bavistin powder) , petrol-operated spray pump (20 liters) skid steer loader , gi pan (tagari) – 15-inch , plastic pan (tagari) – 20-inch , shovel (with ms handle) , hand trowel (khurpi) , watering can , pickaxe , crowbar – 25 mm x 5 ft , double-wheel barrow trolley (ms) – size: 600 x 480 x 600 mm , nylon rope – 12 mm dia. (for borewells) , nylon rope – 10 mm dia. (for borewells) , gi pipe – 2.0 inch (for borewell use) , earthworms (species: *eisenia fetida*) , pvc casing pipe – 6-inch , pvc casing pipe – 8-inch , ro water filter (with cooler; capacity: 40 liters) , gi profile strip – length: 4 meters , gi (galvanized iron) zigzag spring , 2-way fogger , polysheet 200 micron, 800 gauge , 40 mm perforated rainpipe (length 100 m) , 40 mm jointer pipe (pvc) , mta 32 mm x 40 mm (pvc) , end cap 40 mm (pvc) , mta cock 32 mm x 40 mm , 45 mm perforated rainpipe (length 100 m) , 2.5" adapter, c-clamp type (hdpe) , 2.5" sprinkler pipe head (hdpe) , 2.5" sprinkler pipe tail (hdpe) , black polythene bag (size 15x25, 250 gauge) , white polythene bag (size 15x25, 400 gauge) , black polythene bag (size 15x25, 400 gauge) , white polythene bag (size 20x30, 400 gauge) , black polythene bag (size 20x30, 400 gauge) , black ldpe sheet , vermicompost bag, 100g, printed (size 22x36 inches; capacity 50 kg) , neem bag, 100g, printed (size 22x36 inches; capacity 50 kg) , green net (shade net) — 50% shade , green net (shade net) — 75% shade , green net (shade net) — 95% shade , chain-link fencing — 1.5 m , chain-link fencing — 2 m , chain-link fencing — 2.5 m , barbed wire , angle iron 50x50x5 mm — 2 m , angle iron 50x50x5 mm — 2.5 m angle iron 50x50x5 mm, 3 mtr , iron rebar (reinforcement bar) 6 mm , iron rebar 8 mm , iron rebar 10 mm , iron rebar 12 mm , m.s. pipe 1"x1" , m.s. pipe 1.5"x1.5" , m.s. pipe 2"x2" , m.s. pipe 2.5"x2.5" , m.s. pipe 3"x3" , cement (bag weight: 50 kg) , sand (for construction) , crushed stone aggregate (40 mm) , crushed stone aggregate (20 mm) , crushed stone aggregate (6 mm) , bricks (kiln-fired) , g.i. profile sheet , vitrified tiles (4"x2") (glossy double charge) thickness 9-10 mm,

Central Government And Public Sector

CTN :45280929

01 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of allen key 8 mm , allen key 10 mm , allen key 22 mm , slugging wrench , slugging spanner , reversible ratchet handle half inch , reversible ratchet handle three fourth inch , torque wrench , outside micrometer , soft face hammer 40 mm with steel handle , center punch , straight air drill machine , air grinder , measuring tape , tungsten rotary cutter 6x5mm , tungsten rotary cutter 6x13mm , tungsten rotary cutter 6x10mm , flat file , half round file single cut grades of cut second , half round file single cut grades of cut bastard , half round file double cut grades of cut second , half round file double cut grades of cut bastard , needle file , cutting wheel , grinding wheel or dc wheel , gas cutting torch , welding rod ms 7018 36 h , welding rod ss 308 , welding rod ss 309 , emery paper grade 120 , emery tape fine grade , cleaner , developer , penetrant , rustolene rust disintegrator , wire brush , tefflon tape , tig electrode , air hose pipe wire embadded , masking tape 50 mm , ss wire 1.6mm , ss wire 2.4mm , masking tape 75 mm , half inch impact hexagon bit socket 6 mm drive , half inch impact hexagon bit socket 8 mm drive , half inch impact hexagon bit socket 14 mm drive , half inch impact hexagon bit socket 17 mm drive , size 19mm three fourth inch drive socket 12 point , jack up bolt m10 x 150mm , jack up bolt m12 x 150mm , jack up bolt m16 x 150mm , buff flap wheel , 11mm deep socket 6 point , combination plier , circlip plier set , hydraulic hand pump , hydraulic jack button type , hydraulic jack with hand pump , air micro grinder 120 degree angle grinders 3 collet , air micro grinder 90 degree angle grinders 3 collet , curbide rotary burrs 5x10 mm , curbide rotary burrs 3x15 mm , oil stone size 150mmx50mmx25mm fine grade , klinger gasket 1.5mm, non metallic , tinsnips , cylindrical grinding stone 10x20 mm , taper grinding stone 10x20 mm , taper grinding stone 21x50 mm , cylindrical grinding stone 20x50 mm , chain hoist , triple boiled linseed oil sealing compound , premium polyester rope , dowsil rtv sealant 736 , pneumatic connector with coupling allen key 8 mm,size: lenghth of the long arm=100 mm, lenghth of the short arm=36 mm, moc: chrome vanedium steel, black finsh, allen key 10 mm,size: lenghth of the long arm=112 mm, lenghth of the short arm=40 mm, moc: chrome vanedium steel, black finsh, allen key 22 mm,size: lenghth of the long arm=200 mm, lenghth of the short arm=80 mm, moc: chrome vanedium steel, black finsh, slugging wrench, size: 1 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, slugging spanner, size: 3/4 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, reversible ratchet handle 1/2'',head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, reversible ratchet handle 3/4'', head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, torque wrench, 1/2 inch square drive, 7-35 kg, widtht: 50 mm, height: 29 mm, length: 805 mm (approx. ), weght: 3.9 kg (approx. )., torque wrench, size :1/2 inch square drive, 25- 135 nm, torque wrench, size :1/2 inch square drive, 50-220 nm, torque wrench, size :3/4 inch square drive, 135-675 nm, outside micrometer, range (200-225)mm, graduation: 0.01mm, material of the frame: stainless steel, material of the spindle and anvil: hardened stainless steel, soft face hammer 40 mm with steel handle, center punch, length: //bid details 2 / 59

CTN :45292908

01 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of cement , fine sand , rcc block , liquid water proofing compound , binding wire , paint olive green , paint sand , paint dark brown , thinner , red oxide primer , paint brush 2 inch , paint brush 4 inch , window , ms chain , door , chhajja or attachment , chhajja or attachment above loop hole , angle iron picket , srt , ismb , ppgi sheet , sand bag , app based polymeric membrane , bitumen , plywood , thermacol , wooden scantlings , wooden plank , anti termite , mild steel pressed handles , mild steel sliding door bolts , bed , door hinges , loop hole hinges , bed hook , folding bed leg , top outer panels , top upper outer panels , door upper outer panels , middle panels , nut and bolts for srt , steel rack , hiring of plant , construction tools as per appx a , expendable stores as per appx b

CTN :45292912

04 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of chain link mesh , ms angle posts , strut posts , concertina coil , gi binding wire, tension wire, clamps, turnbuckles

CTN :45291428

02 Jun, 2026 NA

Jhajjar - Haryana

Tender For supply of norgren 802050 m 80 pneumatic cyl , norgren 802050 m 100 pneumatic cyl , norgren 802050 m 160 pneumatic cyl , c96kdb 40 400c pneumatic cyl , smc c96kdb 40 300c pneumatic cyl , smc cq2wb63 40dz lifting cyl , metalwork 50x320 pneumatic cyl , single pilot valve , solenoid valve sov 25 valve , solenoid valve sov 35 valve , wheels for 24h carousel , load cell flintec 200kg c3 s , belt for 24h carousel 30 meter , keypad for cuc mk iv , display for cuc mk iv , sprocket 14 teeth 65 bore , sprocket 8 teeth nylon bush , 213 bearing ntn , sprocket 42 teeth 60 bore duplex , needle valve hoke , taper strip ms 1800 mm , 1550 mm uhm taper 90 degree bend , 1850 mm uhm taper 90 degree bend , inlet star 4 pieces each set , outlet star 4 pieces each set , pcb 250 kg c3 s load cell flintech , ss plate 3 mm thick , 802050 m 40 pneumatic cyl , toggle joint for gd pt festo , roller bearing for gd pt , sensor ni10 m18 y1x h1141 , lower bell gd , load cell cable mkiv , flow control valve 1by8inch 4mm , quick exhaust valve 1by4inch 8mm , nrv 1by4inch festo , straight conveyor section gi , conveyor bend without chain gi , leg support conveyor gi , conveyor drive section gi , conveyor tail end section gi , sply of double stopper , pu tube 4 mm tube , pu tube 6 mm tube , pu tube 8 mm tube , flow control valve 1by4inchx8mm , brass block 230b938 gd pt , wl 24x430 reflective sensor sick , wll 24x430 optical sensor sick , wt 24 2x400s26 proximity sensor , manual hot air gun , load cell cable mkiv 3 meter , load cell cable mkiv 2 meter , gd sensor cable 0.75 mtr mkiv , bearing 6024 z2 , piston rod hex 40 300 , cpv ex pilot valve coil , shaft 40x380 mm en 8 , shaft 60x750 mm en 8 , shaft 60x660 mm en 8 , plummer block with ntn 212 bearing , ss wheel with grooves , angle joint for c channel , c channel for 90 degree bend , anchor fastener size 12 mm , anchor fastener size 14 mm , anchor fastener size 16 mm , spiral tube length 10 mtr dia 8mm , sxe9561 e86 00 valve norgren , dead man switch dp045r61 janatics , 10 mm bolt length 40 mm

CTN :45290125

29 May, 2026 4.43 Lacs

Rupnagar - Punjab

Tender For providing and fixing pvc coated chain link fencing with ms gate for nursery area, iit ropar

CTN :45228398

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of bottom ash and wet ash spares for overhauling of unit 3 under ahp mm - nozzle for air washer (dry for fly ash system size: 5 mm dia,for ahp-ii, nozzle with insert # tip dia 9 mm of insert,moc-ss 410 (nozzle),ceramic,hardness 7708 mohs,ahp-i# for 10in wetting head,make-dcips,pn-6,7, inlet section fr wetting head10" of ahpi ( one side bevelled and others side plain (b/p),after 90 degree 10" elbow for wetting head. moc: durite 450bhn ), adaptor for collector tank ( one side bevelled and others side flanged with holes. mat: durite 450bhn ), adapter b/b # for ahp-i,below wetting head# for collection tank ( both sides bevelled. mat: durite 450bhn ), tail piece after combining tube,ahp-ifor ba slurry line,make-dcips ( one side bevelled and others side plain (b/p),after combining tube. moc: durite 550bhn ), complete assembly of jet pulsion p/p moc: durite 550 bhn for body,ss-410 for nozzle tip,ceramic 7 moh min for nozzle insert,cap.-60 t/h,pr.-10 kg/cm2 for ahp-i, combining tube # dcips make-dcips,part no.-1,moc: durite,550 bhn,for ahp-i ( hydrostatic test pressure at shop: 9 kg per sq cm (g). ), drain pit jet pump,ejector type # complete assy with water inlet elbow,pipe with flange,bolts and nuts and foundation bolts ( discharge rate of 35 # 50 cubic mtrs. / hour, horizontal distance of 150 # 160 mtrs with an elevation of 10 mtrs from gound level (0.00 mtrs), sump volume : 45 cubic mtrs. one no. orifice for discharge line with each of ejector jet pump is required with other accessories. ), ba hopper,feed sump/chute for bottom ash hopper, nozzle # of seal trough,for ba hopper,ahp-i# for ba hopper,ahp-i ( nozzle with holder. ), inspection window assembly looking glass dia 224 mm th 12 mm for ahp-ifor ba hopper, inspection window glass,200m # ( moc: borosilicate glass. ), shaft sleeve for clinker grinder for make-ucc/dcips,pno. 15 moc ss 410, 350 bhn, for ahp-i, cambolt,nut,locknut # moc-ss 410(cambolt) heat treated to rc 32-34,metric m 20 coarse a2-70,is 1363 (nut# for ba clinker grinder ( 1set=32 nos 1. moc: ss-420 (cam bolt) heat treated to rc 32-34. metric m20 coarse a2-70, is 1363 (nut). 2. 01 set: ), packing gland follower # moc: bronze ltb-2 is 318,for ahp-1 ( for ba excen crusher 1. part no.-12 2. moc: bronze, ltb:2 is:318 ), labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips ( for ba excen crusher 1. part no.-13 2. moc: ms is 2062 gr-a. ), chain # no of link-118,for ahp-i ( for clinker grinder of ahp-i. no of link: 118. ), small size sprocket for ahp-1 bktpp for gear box,for ahp-i, packing gland housing # moc: ci fg 220 is: 210,for ahp-i ( for ba excen crusher 1. part no.-9 2. moc: ci fg 220 is: 210. ), slinger for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582 ( for ba excen crusher 1. part no.-14 2. moc: ms is 2062 gr-a. ), cam for clinker grinder # heat treated & normalised for ahp-i# for moc:hi chrome alloy with 22% to 27% cr, gate face of feed gate # moc-ss 316 for ahp-i ( moc: ss - 316. including m12x65, csk hd soc. cap bolt, nut, washer. ), adjustable seating wedge # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate. moc: ms, is: 2062 gr a. ), roller # moc-steel.is:1030 for-ahp-i ( for feed gate of ba crusher. moc: steel, is: 1030. ), gland follower for indicator rod dcips of feed gate, ahp-i, guide angle l.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), guide angle r.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), indicator rod # moc-s.s,size: 21mm dia.(solid) and 1400 mm long with both ends threaded and nuts,stg-i# for bottom ash hopper feed gate

CTN :45261968

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, chain, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap location; - south side of oil godown. beside road lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

corporations/Associations/Others

CTN :45160985

25 May, 2026 NA

Salem - Tamil Nadu

Tender For mtps i - civil circle replacing the damaged rcc fencing supports by providing new ms angle from north east corner to south west corner (phase i) and painting of chain-link fencing (ch 0-350m) in switch yard at mtps i

corporations/Associations/Others

CTN :45189375

29 May, 2026 NA

Salem - Tamil Nadu

Tender For mtps i - civil circle replacing the damaged rcc fencing supports by providing new ms angle yard leading from south west corner to north east corner (phase ii) and painting of chain-link fencing (ch-351m-720m) in switch yard at mtps i

Ms Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others