Latest ms chequered plate Tenders | Government ms chequered plate Tenders

CTN :45519531

13 Jul, 2026 40.00 Lacs

Guna - Madhya Pradesh

Tender For supply of water supply pipe line hand pump bore well repair anf repairing material under np raghogarh - water supply materiasl, cid joint 80mm dia class 15, cid joint 100mm dia class 15, cid joint 80mm dia class 10, cid joint 100mm dia class 10, ci sluse valve 50mm dia heavy duty, ci sluse valve 80mm dia heavy duty, ci non return valve 50mm dia heavy duty, rubber packing sheet, nut bolt all size, ci flang 50mm dia heavy duty, ci flang 80mm dia heavy duty, threst plate, acp pipe 150mm dia class15, hand pump rod socket 12 mm, hdpe pipe 75mm dia pe100/10kg, starter oil p, gi pipe 32mm dia with socket class b heavy duty 5 kg/rmt, gi pipe 50mm dia with socket class b heavy duty 8 kg/rmt, gi socket 50mm dia seamless, gi socket 50mm dia, gi bend 50mm dia, gi clamp 50mm dia 150mm length, main switch 63 amp., main switch 100 amp., gi nipple 50mm dia 100 mm length, gi redeuser 50mm x 75mm, copper cable 3 core 16 sqmm (falcon or finolex make), bore cap 6 inch, bore cap 8 inch, gi end cap 2 inch, gi end cap 3 inch, submerciable moter pump single phase 3 hp 160m., gi elbow 2 inch, gi elbow 3 inch, gi/ci t 2 inch, gi/ci t 3 inch, cpbc pipe heavy duty 16mm dia, handle hand asembly compleate, padestanal heavy duty, water chamber, ci cylender heavy duty (deep well), upper valve assembaly compleate, check valve assembaly compleate, ms rod 3m - 12mm, hexagonal nut bolt, chain nut bolt, chain with cupler, handle excell, bearing 6204 heavy duty\, naitril washer, leather washer, rubber sealing ring, uppor valve guide seat, submercible motor pump 15 hp motor 12 stage pump (falcon /texmo/cri or equelent make), starter 1 hp to3 hp switch penal, starter 10 to 15 hp delta, control penel board oil starter 20 to 35 hp (two button), control penel board oil starter 20 to 35 hp (trhee button), rubber ring 80 mm, rubber ring 100 mm, auto switch 7 wire semi, 9 wire wth, pvc cable 3x4 sqmt standard make (falcon /finolex or equlent make), pvc cable 3x6 sqmt standard make (falcon /finolex or equlent make), copper cable three core 16sqmt standard make (falcon/finolex or equlent make), nariyal rassa, pvc rassa, teflon tap, clamp 1/2 ", clamp 1 ", clamp 1 -1/4", clamp 2", clamp 2-1/2", clamp 3", black roll pipe 3/4 ", black roll pipe 1", black roll pipe 1-1/4", tala 50mm, tala 60 mm, tala 75 mm, penchkas, plaash, pipe rinch 12 ", 18" & 24", 7/16 coper wire, 1.5 coper wire, 1" over flow footwall, 63 a. kit kat, 100 a. kit kat, 63a. m.c. b. for pol, 100a. m.c. b. for pol, 125a. m.c. b. for pol, 1 hp open well moter ci body, over head tank 1000l.

CTN :45519945

22 Jun, 2026 37.35 Lacs

Chhabra - Rajasthan

Tender For requirement of spares of m/s ingersoll rand make conveying air compressor model r-160i-x 7.5wc and up5-22-7 for dry fly ash dense phase system,unit#3 and 4, ctpp, chhabra - model no. r160i-x7.5 wc, seal, shaft high pressure part no. 89292445, element, seprator tank 18 inch part no. 23566938/ 23545841, oil cooler, water cooled part no.23572415, after cooler, water-cooled part no.23572423, cap screw m6x25 soc hd cap w/nylon insert part no.22168710, pressure transducer 0-225 psig part no.47545275001, pressure transducer 0-15 psig part no.47560902001, assembly gear set 160 kw single stage 7.5 bar part no.23521859, pin dowel [motor] part no.39194915, pad pre filter part no.23523772, actuator service kit part no.23467251, inlet valve part no.23421217, elbow 1/4" 90 degree straight thread ms part no.96757604, spacer gear (ce177g) part no.39326483, sleeve motor shaft 4.25 od m132/160 part no.89292478, key,square both ends 0.88sq x1.25 part no.95135638, valve in line check part no.23453020, tube gear case scavenge part no.23453129, air cleaner assembly nlg37-42 pico standard part no.23390156, ultra coolant (208 litres) drum part no.39433743, key, rect one round end part no.96759212, clamp, plate part no.35295336, screw, socket head part no.32555819, housing, seal part no.22880744, gasket, gear case part no.39454558, pin, dowal [air end] part no.35295336, valve, orifice [separator tank] part no.23449200, oil filter assembly part no.23523434, o ring set part no.ok002222, pressure transducer cable part no.23529373, temprature sensor part no.23522246, valve min press check 132-160 kw part no.23521297, 5sv solinied cable part no.23562432, model no. up5-22-7, element coolant filter part no.54672654, element seprator 194cfm (spin-on) part no.54749247, pad pre filter part no.22053722, element air filter part no.89295976, kit, inlet valve repair part no.22067177, kit-mpcv part no.22064695, kit thermal valve repair part no.22393326/ 22832885, valve solenoid 125 inch npt part no.54774302, valve solenoid 1/2 in npt 110 volt part no.54654652, spring gas part no.54749114, elbow .31tx .50sae part no.95993572, elbow , 90deg male 37a10c3xz2 part no.95937686, tube oil feed (rear bearing) part no.85581858, tube, vmc block to bare part no.85581866, belt part no.89265052, ultra coolant (20litres) drum part no.38459582, tempreture sensor part no.22137848, conteroller part no.22128763, tube nylon part no.39124813, tube nylon part no.39124821, elbow part no.39155650, elbow part no.39155577, nipple part no.22354989

CTN :45484588

18 Jun, 2026 3.78 Lacs

Kamrup - Assam

Tender For supply of replacement of existing ms iron plate of driver cabin upper side of pbs of size 15 ft x 2 ft and thick 6 mm. , replacement of existing 02 x glass of crew cabin. , supply and fixing 1 x exhaust fan for kitchen room. , supply and fixing of 04 x iron net for air wind pipe of outer side. , supply and fixing 1 x ac dc panel. , supply and fixing of 26 x 5 amp socket. , supply and fixing of 36 x led tube light. , supply and fixing of 09 x switch board with 5 amp. , replacement of existing 06 x navigation light with glass protection. , replacement of existing rotary pump of pbs as per existing specification. , repair of leakage defect of pt pump of sbs. , replacement of existing 02 x iron battery box as per existing specification including all charges. , replacement of existing fuel tank of aux engine generator as per existing specification.

Central Government/Public Sector

CTN :45505998

20 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of ms angle - 50 x 50 x 6mm is 2062 grade b , ms angle - 75 x 75 x 8mm is 2062 grade b , ms angle 75 x 75 x 8mm is 2062 e250 grade a , ms chequered plate - 1219 x 4876 x 5mm

Central Government/Public Sector

CTN :45466892

16 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] rprg,duct 55.000 to,[2] disman,fab,str 54.000 to,[3] chng,tube of roof 162.000 m,[4] rprg of receiving chute 11.700 to,[5] disman,pipe,manhole 27.000 ea,[6] disman,fab&ern,damaged str 54.000 to,[7] disman,pipe,ms 7.200 to,[8] ern of pipe,ms 7.200 to,[9] rprg of brg housing 68.000 ea,[10] remove & fix cross beam 32.000 le,[11] rprg,car frame 50.000 ea,[12] rprg of platform 14.400 to,[13] ern,bottom stiffeners of ladle 27.000 to,[14] ern,damaged shell of ladle 23.400 to,[15] ern,top shell complete 22.500 to,[16] rprg,trunion of hot metal ladle 11.700 to,[17] rprg,brick retainers in ladle 36.900 to,[18] disman of concrete 32.400 m3,[19] fab,stand,rack,bin&fencing 18.000 to,[20] ern,stand 18.000 to,[21] disman of damaged str 13.500 to,[22] align,cross travel gearbox&mtr 1.000 ea,[23] streng&fixg,side guard plate 9.000 to,[24] disman,co gas pipe 5.000 to,[25] disman,roller,end stopper housing 2.000 to,[26] fitg,trunion by wldg&finishing 4.000 ea,[27] chng,chrgng spout w/bend plate 18.900 to,[28] dism/fab/ere shell of ldl 22.500 mt,[29] dismantl of recup from bottom shell 15.000 mt,[30] rprg,ladle supporting str 11.250 to,[31] rprg,converter shell 27.000 m2,[32] testing of optical fiber cable 4.000 ea,[33] ultrasonic testng, repaired steel ladle 4.000 ea,[34] rprg,pouring out spout shell plate etc 5.400 to,[35] changing nut,bolt&screw f/centrifuge r20 41.000 ea,[36] ern of steel/slag car main beam etc 9.000 to,[37] fitg,trunion by wldg&finishing 12.000 ea,[38] rprg,brg housing 13.000 ea,[39] ern,cage bracket,link etc 11.250 to,[40] repair,str frame 22.000 to,[41] align,g/box mtr&base 10.000 ea

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

State Government

CTN :45317388

16 Jun, 2026 16.37 Lacs

Raichur - Karnataka

Tender For corrigendum : procurement of steel items for cam-2 of rtps - ms chequered plate 1250x5000x6mm, ms plate 16 mm, ms plate 12mm_, ms plate 8mm_, m.s plate 6mm_, ms flat 50x6, ms flat 100x10 mm, ms channel ismc 125x65x5, ms channel ismc 100x50mm_, ms channel ismc 75x40mm, ms angle (isma) 65x65x10, ms angle 65x65x6mm, ms angle 40x40x5mm, ms round (solid) 16mm

Central Government/Public Sector

CTN :45468535

13 Jun, 2026 NA

Porbandar - Gujarat

Tender For providing of repair and overhauling service - air conditioner-is 1391; l 1645 insulation failure is occurred in the main incomer cable of edc 6 to ensure safe and reliable power supply the incomer cable running from msb i to edc 2 415 v3 core size 3x185 sqm lengt..,repair and overhauling service - air conditioner-is 1391; l 1646 gun deck and boat deck led flood light base plate is deteriorated base plate is to be replaced hot work involves ms welding and cutting; yes; buyer premises,repair and overhauling service - air conditioner-is 1391; l 1647 03 nos fire flap of engine room ventilation system es1 es2 and es4 is not working the defect is to be rectified and system to be proved for satisfactory operation; yes; buyer premises

CTN :45459814

19 Jun, 2026 60.00 Lacs

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of ms chequered plate form over the newly constructed sump at khanyar scheme, 320 kva d.g. set and other allied works

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

Ms Chequered Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Co-operative