Latest ms clamp scrap Tenders | Government ms clamp scrap Tenders

Central Government/Public Sector

CTN :44113463

27 Feb, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released condemned :1) fiat bogie 11 nos., 2) fiat bolster 3 nos. custodian is : sse/fiat/pl location: near asrs & jumbo yard , ( un serviceable to railway use.) special conditions: 1.all the necessary material handling equipment such as hydra and the manpower required for loading of the above material should be arranged by the contractor only. no assistance shall be provided by railway in this aspect. 2. cutting of auctioned condemned bogies is permitted at a suitable location within lower parel workshop to facilitate easy transportation. however, the firm shall arrange all necessary tools, equipment and consumables (such as cutting gas) at their own cost. lower parel workshop will only provide the designated location for the cutting activity. the firm must ensure strict adherence to all safety precaution and guidelines during the cutting and handling of condemned bogies & bolsters.3.suitable trucks should be arranged by the contractor for movement of the above material. 4.contractor has to lift only the material given for disposal as advised by the custodian. they cannot lift any other material.

Central Government / Public Sector

CTN :44113090

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - casnub bogies of side frames bolsters : actual lot no. 03122602 0517 pl no. 98117117 (15) (hsn code 72044900-gst 18%-on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters,casnub bogie pcs. with or without attachments of spring planks brake beams push rods equalizing levers springs adopters wedges, brake blocks and rubber pads. (gas cutting is permitted only two cuts for side frames and bolsters, and six cuts for full bogies to reduce them to a lorry-loadable size).this material available at lot no. 0725. location road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government And Public Sector

CTN :44113116

25 Feb, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - ten nos iron and steel scrap cutup parts of cond. wagons and one no scrap stainless steel (irsm-44 body) cut up parts of cond. wagon to be sold without excluded fittings, 04 wheel sets with ctrb & 02 casnub bogies per wagon which are exist with wagon, excluded fittings as per letter no. mech/hq/003/007/4016 dt.12.11.18 and letter no. mech/hq/010/010/warranty.dated: 09.06.2020 casnub bogies and 04 wheel sets with ctrb per wagons which are exist with wagons to be handed over by purchaser to sse/c&w/bmy.

CTN :44050935

24 Feb, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/94/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058402/c gs 2) se 058293/c wgscn 3) se 058285/c wgscn 4) se 058283/c wgscn 5) se 058410/c gs 6) se 058304/c wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-01 (bogie no. 101920/10), srl no.04-01 (bogie no 815-1024 /06) srl no.05-01 ( bogie no. 130036/13) and srl no.06-01(bogie no. 101723/10) (c) the coaches are to be sold with 08 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-02, srl no 03-02, srl no.04-01no, srl no 05-01 and srl no 06-01. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44050936

24 Feb, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/mn/95/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058220/c wgscn 2) se 058233/c wgscn 3) se 058266/c wgscn 4) se 058291/c wgscn 5) se 058415/c gs nb: [1]. (a) all coaches are to be sold without 20 nos. wheel sets complete alongwith roller bearing against srl no 01 to 05 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-02 (bogie no. 501-4221/10 & scn -8031/17), srl no.03-01 (bogie no scn -6654/15) srl no.04-01 (bogie no.110351/11) (c) the coaches are to be sold with 06 nos.unserviceable bogies without excluded fittings. against srl no. 02-02, srl no 03-01, srl no 04-01, srl no.05-02nos. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 20 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Central Government / Public Sector

CTN :44050857

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 031326020109 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr , boxnr m2 , boxn m1 available on rails. 1) special repair boxnr 25069660248, 2) scr boxnr m2 25099636435 ,3) scr boxnr 10099617775, 4) scr boxn m1 10099627415. location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with all fittings,8. breake cylinder 355, 9. auxilary reservoir 100 10 sab , 11. boxn door, 12.yoke pin support (1st plate),13. safety plate with anchor plate (2n d plate 14. yoke support plate(3rdplate), 15. yoke pin,16.draft gear followers,17. knuckle pin 18.knuckle thrower.19.back stoppers ds8 no:0999603109. dt: 14.02.26. note to purchaser: before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 29.846 mt (m.s 21.542 , ss-8.304 ) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 04 nos.

Central Government / Public Sector

CTN :44050858

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 031326020113 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s.8 wheeler wagons,boxn m1, mboxn bcnm1 available on rails. 1) ser boxn m1 10079629170,2) scr boxn m1 10099662010 ,3) ser bcn m1 30079161500 , 4) nr bcn m1 30039161137 ,5) ser mboxn 93079160003 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with all fittings,8. breake cylinder 355, 9. auxilary reservoir 100 10 sab , 11. boxn door, 12.yoke pin support (1st plate),13. safety plate with anchor plate (2n d plate 14. yoke support plate(3rdplate), 15. yoke pin,16.draft gear followers,17. knuckle pin 18.knuckle thrower.19.back stoppers,20. bcn swing, 21.bcn flap. ds8 no:0999603113. dt: 14.02.26. note to purchaser: before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 53.271 mt (m.s 51.943, ss-1.328 ) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44050859

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 031326020110 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr , boxn m1,bcn m1 available on rails. 1) ser boxnr 25079663130 , 2) cr boxn m1 10019660973, 3) scr boxn m1 10099663215 ,4) er bcn m1 30029160676 ,5) er bcn m1 30029060631 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with all fittings,8. breake cylinder 355, 9. auxilary reservoir 100 10 sab , 11. boxn door, 12.yoke pin support (1st plate),13. safety plate with anchor plate (2n d plate 14. yoke support plate(3rdplate), 15. yoke pin,16.draft gear followers,17. knuckle pin 18.knuckle thrower.19.back stoppers,20. bcn swing, 21.bcn flap. ds8 no:0999603110. dt: 14.02.26. note to purchaser: before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.987 mt (m.s 45.582, ss-4.405 ) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44050860

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 031326020111 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s.8 wheeler wagons,boxnr, bcnm1 available on rails. 1) ser bcn m1 30079066461 ,2) nr bcn m1 30039016505 ,3) special repair boxnr 25069660231, 4) ser boxnr 10079671506 ,5) special repair bcn m1 30069060493 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with all fittings,8. breake cylinder 355, 9. auxilary reservoir 100 10 sab , 11. boxn door, 12.yoke pin support (1st plate),13. safety plate with anchor plate (2n d plate 14. yoke support plate(3rdplate), 15. yoke pin,16.draft gear followers,17. knuckle pin 18.knuckle thrower.19.back stoppers,20. bcn swing, 21.bcn flap. ds8 no:0999603111. dt: 14.02.26. note to purchaser: before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 53.352 mt (m.s 44.688, ss-8.664 ) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :44050861

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 031326020112 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s.8 wheeler wagons, boxn m1 , bcnm1 available on rails. 1) nr boxn m1 10039673236, 2) wr boxn m1 10089660316 ,3) cr bcn m1 30019160181,4) ser boxn m1 10079667318 ,5) nr boxn m110039660861. location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with all fittings,8. breake cylinder 355, 9. auxilary reservoir 100 10 sab , 11. boxn door, 12.yoke pin support (1st plate),13. safety plate with anchor plate (2n d plate 14. yoke support plate(3rdplate), 15. yoke pin,16.draft gear followers,17. knuckle pin 18.knuckle thrower.19.back stoppers,20. bcn swing . ds8 no:0999603112. dt: 14.02.26. note to purchaser: before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 39.167 mt. sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Ms Clamp Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors