Latest ms clamp Tenders | Government ms clamp Tenders

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

CTN :45324763

07 Jul, 2026 8.72 Lacs

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawar - parker gear pump -27cc/ rec., 275 bar , shaft coupling for motor and pump hub (l- 190) , oil level indicator , oil filter cartridge , pressure gauge (0-280 bar) glycerin filled bcpm , poppet valve for rail clamp power pack , oil filter cartridge , shaft coupling of hugland power pack , bladder for accumulator 2.5 i ltr type (pre charged 9 bar) , bladder for accumulator 1 i ltr type (pre charged 15 bar) , level gauge type- sna-254-b-n , pressure gauge (0-60 bar) type- 2750-63-0-060-21 , pressure gauge (0-400 bar) type- 2750-63-0-0400-21 , butterfly valve ab16s-50-he

CTN :45627363

03 Jul, 2026 NA

Ratnagiri - Maharashtra

Tender For corrigendum : supply of 110v.dc high thrust low current maganetic field motor as per irs:s-37/82 with drg.no.s-10910 & 10850, suitable for irs:s:24/2002 & latest amd.(clamp type point machine using for 52 kg. rail, manufacturer crompton greaves and dtpl) ]

CTN :45321470

07 Jul, 2026 8.72 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawar. - spares for parker/hugland make hydraulic power pack , parker's gear pump -27cc/ rec., 275 bar , shaft coupling for motor & pump hub (l-190) , oil level indicator , oil filter cartridge , pressure gauge (0-280 bar) glycerin filled bcpm , poppet valve for rail clamp power pack , oil filter cartridge , shaft coupling of hugland power pack , bladder for accumulator 2.5 i ltr type (pre charged 9 bar) , bladder for accumulator 1 i ltr type (pre charged 15 bar) , level gauge type- sna-254-b-n , pressure gauge (0-60 bar) type- 2750-63-0-060-21 , pressure gauge (0-400 bar) type- 2750-63-0-0400-21 , butterfly valve ab16s-50-he

CTN :45733123

08 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For auction sale of pway scrap - us ms scrap (a-slide chair plate 52 kg-287 nos, b-fish plate 90r 18"-06 nos, c-fish plate 52 kg 24"-46 nos, d-spl bearing plate 52 kg-37 nos, e-jn.fish plate 90r/52kg-10 nos, f-gauge tie plate off sizes, g-fish plate 52kg & 60 kg (1.oo m off sizes)-18 nos, h-joggle fish plate 52kg-180 nos, i-strecherbar with clite off sizes 52 kg-230 nos,j-rail screw off sizes-6360 nos,k-joggled clamp with bolt,l-ms bolt off sizes-1250 nos,m-ms rail flange 52kg & 9r& n-misc ms scrap (in up state)

CTN :45720695

20 Jul, 2026 NA

Tikamgarh - Madhya Pradesh

Tender For supply of implant and implant consumable during the year 2026-27 - tens nail ss set, tibia nail ss set, femur nail ss set, proximal tibia plate ss set, distal femur plate ss set, ss wire, k- wire ss, external fixature ss, pfn ss, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper

CTN :45701508

07 Jul, 2026 NA

Patiala - Punjab

Tender For supply of material for classroom i.a.s. and allied services training centre at pup - curtains of size 3'-6"x11'-0" made of superior quality with provision of pvc rings complete in all respects, curtain rod " (heavy quality), m.s. clamp (per nos).

CTN :45318214

06 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of 5241420280 gasket for set w6 , em6290b-5285302783 modular system , em6290b-5285302883 modular system , em6290b-5295308212-s0001 plug-in board not adjusted , em6290b-5552031780 gasket , em6290b- 700292008400 tab washer , em6290b-700368022001 sleeve rubber , em6290b-700429018005 o-ring for set w5 , em6290b-700429065000 o ring , em6290b- 700429130003 o ring , em6290b-700429140000 o-ring for set w5 , em6290b-700429160001 o ring , em6290b- 700429190001 o ring , em6290b-700429244000 o ring for set w6 , em6290b-705100502035 cylinder roller bearing , em6290b-7603038101 washer a cop s2000 by 4000 , em6290b-8499970065 gasket for set w5 , em6290b-8499970066 gasket for set w5 , em6290b- 915007013000 transition socket , em6290b- e0010106951 injector , em6290b-x00041391 actuator vlv , em6290b-xp52499100226 v-band clamp , em6290b- xp52717300024 key , em6290b-xp52717300077 washer , em6299b-5240384110 conrod bearing upper half , em6299b-5272030080 gasket , em6290b-x00043422 battery , em6290b-x00055829 by 50773 sealant , em6290b-x00e50200575-76 plug in board , em6290b- x00e50700032 wiring harness for on-engine sensor , em6299b-700429010004 o-ring , em6299b-ex00036684 coolant pump , em6299b-x00040978 fuel delivery pump , em6299b-x52405500177 cylinder head cover , em6299b-x52820500001 sealing ring for seawater cooler , em6299b-x59308300058 easychange fuel filter , em6299b-x59407700023 hp fuel line , em6299b- x59499100165 sealing ring , em6299b-x59599100145 hose , em6290b-5240780824 conn fuel rail rear , em6290b-0000170660 ring c e , em6290b-0000530126 valve collet , em6290b-0000741893 spring , em6290b- 0002000017 base complete , em6290b-0055345410 switch , em6290b-111b14009 tapered compression piston ring , em6290b-111b14010 1 ring oil control , em6290b-5272010153 spacer sleeve , em6290b- 5295308712 plug-in board , em6290b-5550111610 cylinder liner , em6290b-700429021002 o ring , em6290b-700429030002 o ring , em6290b-700429043000 o ring , em6290b-x00e50208386 pressure sensor , em6290b-x52408100002 link , em6290b-xp58420400009 gasket , em6299b-ex59507300003-87 hp pump , em6299b-700429012004 o ring , em6290b- ex52710100050 exhaust turbocharger lift side , additional charges em6290b-x00012879 fuel filter, em6299b-8699950012 clamp, em6299b-x00009934 o-ring, em6299b-x00044862 sealing ring, em6299b-x52404200042 gasket for cylinder head, em6299b-x59414500018 exhaust pipe bellows, em6299b-x59420200238 restrictor, em6299b-x59499100160 o ring, em6299b-x59512500026 gasket f air transfer valv, em6299b-xp52717300001 sealing ring, em6290b-000-092-17-05 filter element, em6290b-000000000668 clamp, em6290b-0000187135 crankcase breather, em6290b-0000920260 gasket, em6290b-0000943268 contam indicator, em6290b- 0001400182 exh pipe bellows, em6290b-0002033286 valve cover, em6290b-0002033746 end plate, em6290b-0005356660 thermocouple, em6290b- 0005382130 screw driver 2 point 5 x 0 point 4, em6290b-0005382330 screw driver 4x0 point 6, em6290b-0005382530 screw driver 9x270, em6290b- 0005382735 computer accessories trackball, em6290b-0005382830 screw driver phillips 4 point 5, //bid details 2 / 72

Central Government And Public Sector

CTN :45704062

06 Jul, 2026 5.16 Lacs

Darbhanga - Bihar

Tender For supply of modernization of distribution infra 2x400 kva substation companybagh b b -dismantling and refurbishing of electrical distribution system , itc of existing load bank with static meter , itc of existing load bank , trimming and pruning of four trees , transportation of one dismantled lt panel darbhanga to mzp , removing of old faulty outlived mv panel , provision of structural iron channels mounting framework for the lt panel , re-furbishment of existing mv panel , brickwork for minor structural alterations near the lt panel support base , straight through joint 185 , straight through joint 50 , removing and relaying of existing cement interlocking bricks , laying of 1.1 kv grade of 35 sqmm to 185 sqmm direct in ground , dressing of cables , finishing of the lt bus bar box , 20w surface-mounted led tube light , a. horizontal type tpn db 8 way with double door , b. horizontal type tpn db 8 way single door , a. vertical type, 415 v, tpn db 8 way double door , dressing of dbs , a. single pole mcb 6 to 32 a , b. four pole isolator 63 a , c. four pole isolator 40 a , d. double pole isolator 40 a , e. tp mcb 63 a , f. 125 a tp mccb 16 ka , 3 pole mccb of 250a, 25 ka , itc of existing lt bus bar box , sitc wall mounted heavy-duty air circulators fans of 600mm metal blades , supplying and fixing of 5mm thick m.s.chequered plates , fixing of ms stand of pac outdoor unit , providing double coat spray painting , sign writting numbering on all panel proper marking of its connectivity , a. wiring for light point group-a , a. copper conductor, single core cable 2 x 1.5 sq. mm , a. medium class pvc conduit 20 mm , shifting re- installation of submersible pump staters , making opening of wall to suit the size of 380 mm sweep exhaust fan , supplying fixing of exhaust fan of 380 mm sweep heavy duty , a. blanking plate , b. 5 pin 15 a socket , c. 15 16 a piano type switch , d. 5 6 a piano type switch , e. 3 pin 5 6 a socket outlet , f. 3 pin 15 a top , g. wall fan , h. down rod for ceiling fan installation 3 ft length hook , a. 100 watt flood light , b. 24 w led rimless surface panel light , sitc of 100 a 3 phase neutral copper bus bar in sheet steel enclosure , dressing of existing distribution system of type ii staff qtr , itc of 100 a 3 phase neutral bus bar with 100 a mccb in sheet steel enclosure , supplying fixing of double pole spn mcb 32 a in the sheet steel enclosure , s l 2 1.5 sqmm copper conductor , removing the faulty lt cable of size 3.5 core 240 sq.mm , ms clamp on four pole structure for fixing the ht cable , extracting of spare main ht cable 11 kv 95 sq mm size from the soil , extracting of faulty spare ht cable 95 sq mm from the duct manual labour , fastners nut bolt, al lugs, socket, cu lugs socket, washers, screw, pvc clips , acrylic sheet of 2 mm thickness , hrc fuse of 200 a //bid details 2 / 49

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Ms Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government