Latest ms clip Tenders | Government ms clip Tenders

Central Government/Public Sector

CTN :45733111

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 72029563125 bobr (2 )er 72029577863 bobr (3)se 10079663020 boxn (4)nr 99038713280 brhn (5)er 99028736237 brhn (6)er 72029560995 bobr (7) wr 10089560210 boxn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 07 nos (83.990 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 07 nos (83.990 mts) advice n0te no.-25-03287 dt-02.03.26,25-03316 dt-20.03.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45733112

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 12029801919 boxnhs (2 )er 72029563699 bobr (3)er 72029561718 bobr (4)se 12079660047 boxnhs (5)se 10079763133 boxnhs (6)er 72029562241 bobr (7) se 99079243807 brhn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 07 nos (75.370mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 07 nos (75.370 mts) advice n0te no.-25-03316 dt-20.03.26,25-03287 dt-02.03.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45733113

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - steel scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)ser 25079759208 boxnr (2 )er 10029660093 boxnr(3)se 25079662270 boxnr r(4)wr 25089860420 boxnr (5)se 10079661859 boxnr (6) se 25079765407 boxnr . note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos(44.240 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod.not returnable items 1. foot step l 2. loaded tie rod 3.sets of pipe. lot qty. on approx basis weight 06 nos(44.240 mts) advice note no.- 25-03391 dt-20.03.26 and 25-03385 dt-20.03.26note- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45703049

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - pressure foot guide am (18341/28), throat plate screw (23473/28), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/18), looper screw (6789/18), looper nut (6790/18), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/18), needle tension spring (2710/b), screw special (16791/18), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), looper oscillating block screw (3010/e), looper clamp assly (20792/38), looper drive link (3010/0), looper drive link taper pin (3010/ca), nibbler knife (11025/38), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog am bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog am pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/38), looper (3010/j), needle (30), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/18), fibre disc retaining screw (2714/j), thread eyelet (196), feed dog arm shaft nut (2710/an)

Central Government/Public Sector

CTN :45578647

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For corrigendum : supply of supply of needle bar guide , supply of pressure foot guide arm , supply of throat plate screw , supply of thread tension screw , supply ofthread tension nut , supply of tension disc , supply of tension spring , supply of feed dog arm pin , supply of feed dog arm pin nut , supply of drive pin , supply of needle bell crank taper pin screw , supply of needle drive arm bearing cap , supply of needle drive arm end screw , supply of sewing head fixing nut , supply of looper screw , supply of looper nut , supply of grub screw eccentric , supply of grub screw special , supply of pressure foot roll screw , supply of needle tension spring , supply of screw special , supply of needle drive sleeve , supply of one byfour dia brt ms washer , supply of five by sixteen dia plain washer , supply of oscillator bar , supply of feed dog 8 teeth , supply of throat plate , supply of pressure foot assly , supply of looper oscillating block screw , supply of looper clamp assly , supply of looper drive link , supply of looper drive link taper pin , supply of nibbler kinfe , supply of needle bar thread eyelet , supply of needle clamp nut , supply of feed dog arm bell crank , supply of feed dog arm pin sleeve , supply of feed dog arm pin spring , supply of oscillator pin , supply of feed dog strut , supply of fee dog strut retainer , supply of assly oscillating block complete , supply of looper , supply of needle , supply of needle drive link , supply of needle drive link taper pin , supply of grub screw standard , supply of nut special , supply of needle bar bush , supply of pressure foot hinge pivot screw , supply of fibre disc retaining screw , supply of thread eyelet , supply of feed dog arm shaft nut , supply of thread guide , supply of feed dog arm shaft , supply of looper drive sleeve , supply of arrgt of oscillating block , supply of pressure foot guide stud , supply ofneedle drive sleeve clamping screw //bid details 2 / 61

Central Government/Public Sector

CTN :45678589

15 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of assy ball joint upper , assy ball joint lower , assy front shock observer , front axle cv shaft cv assy lh abs , front axle cv shaft cv assy rh abs , chart pin for roll or cotter , retainer nut , sprint wave washer , nut hex pinion , axle oil seal , washer thrust , front axle cv shaft axle fin , snap ring , bushing synthetic , needle roller bearing assy front , assy hub bearing front set , front brake pad set , steering column cross , assy tie rod set , assy center link rhd set , gear lever bush set , anti-roll bar rubber bush , anti-roll bar rubber bush mtg. , assy link front anti roll bar , rear wheel cylinder , rear brake shoe set , rear brake shoe lock and sprig , hand brake cable both side , u bolt hex nut , pivot bush assy front upper , rear suspension bush kit complete set , assy orvm with turn ind both side , drop arm bush , suspension lower arm bolt , ana bond tube , head light assy with bulb rh , upper arm rubber damper , 4x4 front axle actuator 4 pin , anchor bolt for torsion bar

CTN :45692120

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of wood screws (q3) , cloth tapestry superior quality 48 inch , looking mirror glass 15 inchx48 inchx8mm , chain 5 no size for tapestry stitching , top for table dining ors 1800x600mm size 18 mm , runner zip 5 no size for chair of sofa tapestry , cora cloth cloth white bi 48 inch wide for sofa , top for peg table 450x300mm of size 18 mm thick plywood , top for table dining size 1500 x 900 mmof size 18 mm plywood , u foam 40 density 6 feetx 3 feet x 3 inch , top for table 3 feet x 2 feet of size 18 mm thick plywood , top of table writing size 1200 x 600 mm size 18 mm thick plywood , u foam 40 density 6 feetx 3 feet x 4 inch , top for teapoy 450x600mm of 18 mm thick bwr grade 1 plywood , u foam 40 density 6 feet x 3 feet x2 inch , chandrus , top for table centre of size 900 x 450 x 400 mm 18 mm thick plywood , leg of first class teakwood for table dining 6 person , cleaning cloth 1 mtr wide , hook for almirah shelf fixing , top of teapoy varandah 900 x 450 mm madeup of 18 mm plywood , leg of first class hard seasonal hardwood for table dining ors , peg brass for hat stand , long rail first class teak wood for bed ply top , leg of first class hard wood for table 3feet x 2 feet , plano hinges ss 1 inch x3 by 4 inch x 6 feet , leg of first class hard wood for teapoy wooden , leg of first class hard wood for peg table , hanging ms clip for mirror gents hat stand , leg of first class hard wood for table centre , leg of first class hard wood for table writing , tape for beading fixing roll of 10mtr 15 nos in pkt , u foam rubber foam 40 density 6 feet x 3feet x1 inch , plano hinges ss 1 inch x1 inchx 6 feet inch , hard wood rail 3 inchx1 point 5 inchx 6 feet , powder amber as per sample , rubber 7 step solution of one ltre pack , wax , needle sewing different size , pvc ring for chair table wooden pkt of 100 , wheel for revolving chair , nut bolt for chair steel seat fixing , powder mangani , nut bolt for bed charpoy steel frame fixing , putty gold glazing for above all items see att pdf , hardwood rail of 1 inch x 2 inch x 6 feet of hardwwod , hardwood rail of 2 inch x 2 inch x 6 feet of hard wood , u foam 40 density 6feet x 3feet x 15 mm , hardwood rail of 1 inch x 1 point 5 inch x 6 feet of hardwood , hard wood rail of 1 inch x 1 inch x 6 feet of hardwood , powder rosana , hardwood rail of 1 inch x 0 point 5 inch x 6 feet of hardwood //bid details 2 / 47

CTN :45492754

24 Jun, 2026 4.50 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : supply of retainer , rivit bird cage , cover , pan om , clip , plug rockersw , cover hvac , insert threaded , cap end , knob , sleeve , bumper , instruction , bushing keyed , bushing , clevis rod end , spring centering , pin hardende clevis , stand seat , foam panle , foam edge , foam panel , panel lh , cover pan flor , foam front , boot , foam pan floor , pedal assy lh , hinge rear door , handle latch door , retainer plastic , roller , stop , channel , stud weld on , grip lever , plug , pin pivot tapered , knob clamping , bushing wear , fitting grease , damper , bushing weld on , bushing pivot , ftg grease strainth , ftg grease 90 , ftg grease straght , spring compression , lever tach , pin , cover drain , plug recessed pipe , link , gasket liquid , cover access , cover plate , bearing axle , key wood ruff , vent breather , bushing press fit 5 , mount man fold drain , fitting hyd connector , clamp , mount bulkhead , strap , clamp tube khead , tee , fitting hyd elbow , clamp hose , decal danger , strap tie , clamp 10 , spacer tube , mount valve , mount boom down , handle control , adapter hyd , seal bushing , pin clevis , pin hair * /bid number : gem/2026/b/7640814 + /dated: 09-06-2026 ' ' / bid document 1 / 66

Central Government/Public Sector

CTN :45616664

01 Jul, 2026 NA

Vadodara - Gujarat

Tender For supply of ms clips 31.5 mm (range: 30 mm to 50 mm) ss-304 is 4762: 2002 (rev-2) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45574598

26 Jun, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - needle bar guide (as21), pressure foot guide arm (18341/2b), throat plate screw (23473/2b), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/1b), looper screw (6789/1b), looper nut (6790/1b), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/1b), needle tension spring (2710/b), screw special (16791/1b), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), screw special (29), feed dog 8 teeth (10674/2b), throat plate (20145/3b), pressure foot assly (9764/3b), looper oscillating block screw (3010/e), looper clamp assly (20792/3b), looper drive link (3010/c), looper drive link taper pin (3010/ca), nibbler knife (11025/3b), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog arm bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog arm pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/3b), looper (3010/j), needle (3d), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/1b), fibre disc retaining screw (2714/u), thread eyelet (198), feed dog arm shaft nut (2710/an), nut special (2710/am), thread guide (2703/w), feed dog arm shaft (2710/af), needle drive arm end screw (2714/m), looper drive sleeve (3010/d), arrgt of oscillating block (14584/3b), screw special (122), screw special (2714/f), pressure foot guide stud (2703/n), needle drive sleeve clamping screw (1250/1b)

Ms Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors