Get complete information related to latest Ms Conduit Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Conduit Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Conduit Tenders.
Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di
Tender For bid to ras corrigendum : supply of dish end with fabricated items c c - tori sphercial dish end id 4201x25 as per drawing no 4-81-060-05282 rev00 for ntpc , torisphercial dish end id 2743x20 as per drawing no 4-80-468-68687 rev00 for ntpc , torisphercial dish end od 2500x16 as per drawing no 4-80-999-97325 rev01 for ntpc , fabricated reducer drg no 3-81-060-02881 rev02 -od932/od508 for ntpc , stand pipe assy as per drg 3-81-060-02635 rev01 for ntpc , stand pipe asyy- a level gauge as per drg 2-81-036-00694 rev00 for ntpc , stand pipe asst- b level tranmitter as per drg 2-81-036-00695 rev01 for ntpc , tori sphercial dish end id 4201x25 as per drawing no 4-81-060-05282 rev00 for non-ntpc , torisphercial dish end id 2743x20 as per drawing no 4-80-468-68687 rev00 for non-ntpc , torisphercial dish end od 2500x16 as per drawing no 4-80-999-97325 rev01 for non-ntpc , fabricated reducer drg no 3-81-060-02881 rev02 -od932/od508 for non-ntpc , stand pipe assy as per drg 3-81-060-02635 rev01 for non-ntpc , stand pipe asyy- a level gauge as per drg 2-81-036-00694 rev00 for non-ntpc , stand pipe asst- b level tranmitter as per drg 2-81-036-00695 rev01 for non-ntpc
Tender For supply of instrument consumable fittingssupply of instrument consumable fittings - rustlick 631,370 ml spray bottle , qd-electrical contact cleaner , pipe wrench heavy duty,straight,length-14 inch,taparia , gi 1 inch to half inch reducer socket both side female thread , gi 1 1 by 4 inch to 1 inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 1 by 4 inch reducer socket both side female thread , gi 1 1 by 4 inch to 1 by 2inch reducer socket both side female thread , gi 1 1 by 2 inch to 1 by 2 inch reducer socket both side female thread , gi 1 by 2 inch to 3 by 8 inch reducer socket both side female thread , ss 1 by 2 inch to 3 by 8 inch reducer socket both side male thread , ss 1 by 2 inch npt m to 3 by 8 inch npt f reducer socket , ss 1 by 2 inch npt f to 3 by 8 inch npt m reducer socket , ss 3 by 8 inch to 1 by 4 inch reducer socket both side male thread , ss 1 by 2 inch to 1 by 4 inch reducer socket both side male thread , ss 1 by 2 inch to 3 by 4 inch reducer socket both side male thread , ss 1 by 2 inch npt m to 3 by 4 inch npt f reducer socket , ss 1 by 2 inch npt f to 3 by 4 inch npt m reducer socket , gi 1 inch union , gi 1 by 2 inch union , gi 1 1 by 4 inch union , gi 1 1 by 2 inch union , ss 1 by 2 inch union , gi 1 inch nipple 6 inch length both side thread , gi 1 inch nipple 4 inch length both side thread , gi 1 by 2 inch nipple 6 inch length both side thread , gi 1 1 by 4 inch nipple 6 inch length both side thread , gi 1 1 by 2 inch nipple 6 inch length both side thread , gi 2 inch nipple 6 inch length both side thread , ss 1 by 2 inch nipple 6 inch length both side thread , ibr 1 by 2 inch nipple 6 inch length both side thread , gi 1 inch tee all side female thread , gi 1 by 2 inch tee all side female thread , gi 1 1 by 4 inch tee all side female thread , gi 1 1 by 2 inch tee all side female thread , gi 1 by 2 inch elbow both side female thread , gi 1 inch elbow both side female thread , gi 2 inch elbow both side female thread , lugs pin type 1.5 sq
Tender For supply of 40mm (nb) erw pipe, plain ends in standard length as per is-11961 , 8" dia 90 degree long elbow, standard: astm a234, sch: 40, gr. wpb, bw, non ibr, dimension: ansi 16.9 , 8" dia to 6" concentric reducer, as per annexure-a.
Tender For bid to ras supply of field water supply scheme c c - gi pipe 75mm and 10 ft length , gi socket 75mm , gi l bend 75mm , gi t bend 75mm , gi nipple 75mm , gi reducer t bend 75mm and 25mm , gi union 75mm , gi end cap 75mm , gi pipe 25mm x 10 ft length , gi l bend 25mm , gi t bend 25mm , gi socket 25mm , gi union 25mm , gi tank connector 25mm , gi gate valve 25mm , gi gate valve 75mm , float valve 25mm , gi nipple 25mm , gi flanges 75mm with leather washer , gi solution m seal 100gm , daga motawala , upvc pipe 75mm x 10 ft , upvc socket 75mm , upvc solution 500gm , water tank 5000 ltrs , 12.5 hp high head pump with starter , 1.5 hp pump , 1 hp pump , mcb 20 amp , twin core 10 sqmm wire , cement , sand , 20mm aggregate , 40mm aggregate
Tender For bid to ras supply of reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 25 mm , gate valve 32 mm , m seal 150 gm pkt , taplon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend 110 mm dia , p trap , s trap , pvc air pipe 25 mm dia comma length 3 mtr , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , electric geyser 25 ltr , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass chromium plated shower rose 100 mm dia with bend , urinal pot vitreous china bowl urinal pot flat back , pvc t 110 mm dia , brass cp jet water spray with 1 point 2m long flexible tube for ewc , ppr reducer socket 32 to 25mm , ppr plain socket 20 mm dia , ppr elbow 20 mm dia , distribution box 6 way spn comma 240 volts copper bus bar and neutral link , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w 230v box type 4 feets with crca body pre coated white and prewired for led tube complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug of 1 1 oblique2 inch size isi marked 100 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , cable pvc insulated electric cables heavy duty aluminum conductor of size 6 sqmm twin core , ceiling rose three terminal snow white , led bulk head fitting high with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , plastic body fresh air fan with louvers shutter of 200mm sweep , cable pvc insulated elecric cables heavy duty 1100 volts copper conductor of size 4 point 0 sqmm single core , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , monoblock pump set single phase capcity 2hp , distribution box 2 way with mcb spn 240 volts 10 amp , pvc flexible suction hose pipe 25mm dia , non return valve nrv metal 25mm dia , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp //bid details 2 / 76 nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg w