Latest ms flange Tenders | Government ms flange Tenders

Central Government/Public Sector

CTN :45531590

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms structure consisting of angle, girder, ms gate, filter tank, iron battery boxes, ms plates,tie bar fencing, loose tie bar, ms jali,ms water tank ,pipe structure, heavy blower,rail trolly wheel ,empty stater,crane structure ,shutter ms gate, empty rru and empty pannel structure,ms saria,gate boom,pipes,protective screen fob's and rob's and all type heavy structure similar items with or without undetchable ms ci and nf attachment intact. note - cutting allowed for easy loading only.note-while delivery if any other non-ferrous or non-similar items found in the lot will not be delivered. no pick and chose allowed.qty. on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

corporations/Associations/Others

CTN :45522558

25 Jun, 2026 NA

Amreli - Gujarat

Tender For auction sale of all allu. alloy. conductor,acsr scrap (normal size),abc cable scrap without messanger wire,misc iron scrap,meter scrap as per lot description,m.s. scrap (mild steel scrap),scrap of ctpt unit (without oil) 11 kv,vehicle spare scrap,transformer scrap as per lot description,gi scrap,empty oil barrel 205 ltr capacity,vir/pvc wire (allu),wooden scrap,water cooler scrap,ceiling fan scrap,xlpe conductor / cable scrap,crgo alluminium wound 10 kva/11 kv,3 phase poly carbonate meters scrap,lead scrap,dot matrix printer

corporations/Associations/Others

CTN :45522620

25 Jun, 2026 NA

Dewas - Madhya Pradesh

Tender For auction sale of u/s empty open and close mouth ms drum 200 itrs capacity,u/s dry and wet wooden scrap in different variety and size,u/s metal dust (iron metal dust derived from cutting of machines),u/s plywood box & cover with g.i. strips

State Government

CTN :45282107

15 Jun, 2026 63.00 Lacs

Patti - Punjab

Tender For corrigendum : supply of supply of 11 kv v type cross arm clamp , supply of 3 phase dis. box clamp with nut and bolts , supply of connecting cable , supply of l.t. fuse set protection box , supply of tinned copper fuse wire different size , supply of hdpe pipe , supply of stone pad , supply of holding clamp , supply of ms angle , supply of t-off chhanel , supply of top chhanel 125x65x240 , supply of dropper channel 100x50x2028 mm. , supply of danger board with clamp and nut and bolt , supply of g.i. patti clamp nut and bolts , supply of l.t. tail less unit , supply of copper l-pieace , supply of 11 kv f clamp , supply of suspension clamp , supply of dead end clamp , supply of eye i hook , supply of eye bolts for guarding , supply of j hook , supply of lt clamp , supply of pearcing connector , supply of alluminium lug 120 sq.mm. , supply of alluminium lug 240 sq.mm. , supply of alluminium lug 70 sq.mm. , supply of nut bolts and washers off size , supply of guarding angel , supply of guarding angel clamp , supply of m.s. angel iron 65x65x6 mm. , carriage of 9 m stp pole-sp- 55 galvanised , carriage of 11 m stp pole-sp- 55 galvanised , carriage of 8.5 m pcc pole , carriage of v type cross arm for 11 kv , carriage of 11 kv pin insulator with pin , carriage of disc insulator with fitting t and c 45 kn , carriage of 11 kv fuse set , carriage of 11 kv tpmo with polymer insulator , carriage of complete stay , carriage of distribution transformer 25 kva , carriage of distribution transformer 63 kva , carriage of distribution transformer 100 kva , carriage of distribution transformer 250 kva , carriage of acsr dog conductor , carriage of acsr weasel conductor , carriage of m s earthing rod 20 x2540 mm , carriage of lt al. xlpe cable size 1x240 sq.mm. , carriage of lt pvc cable 1x120 sq.mm. for dtr , carriage of lt pvc armoured cable size 3.5x70 or 35 sq.mm. , carriage of 11 ) /bid number : gem/2026/b/7551524 * /dated: 20-05-2026 & & / bid document 1 / 54 kv xlpe cable 3x185 sq.mm. , carriage of lt ab cable 3x120 sq.mm. , carriage of lt ab cable 3x50 sq.mm. , carriage of lt ab cable 3x95 sq.mm. , carriage of lt pvc armoured cable size 4x25 sq.mm. , carriage of 33 kv xlpe cable 3x300 sq.mm. , carriage of 33 kv indoor or outdoor jointing kit , carriage of 11 kv indoor or outdoor jointing kit , carriage of 33 kv straight through , carriage of 11 kv straight through size 3x185 sq.mm. , carriage of 11 kv vcb , carriage of g.i. wire 6 or 8 swg for guarding , carriage of three phase distribution box , erection of l.t. fuse set protection box , execution of chemical earthing with g.i. patti clamp nut and bolts , execution of pipe earthing with g.i. patti clamp nut and bolts , erection of l.t. tail less unit with all respective material , laying of acsr dog conductor , laying of acsr weasel conductor , laying of lt ab cable 3x120 sq.mm. , laying of lt ab cable 3x50 sq.mm. , laying of lt ab cable 3x95 sq.mm. , mounting of 3 phase distribution box , erection of double pole structure , erection of single pole structure , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of distribution transformers , plinth work , installation of transformers 11 or 0.4 kv t or f 25 kva , installation of transformers 11 or 0.4 kv t or f 63 kva , installation of transformers 11 or 0.4 kv t or f 100 kva , installation of transformers 11 or 0.4 kv t or f 250 kva , laying of cable 11 kv xlpe cable 3x185 sq.mm. , laying of cable 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit , installation of 11 kv indoor or outdoor jointing kit , installation of 33 kv straight through , installation of 11 kv straight through , installation of 11 kv vcb , dismentlling of jarjar g.i. wire and weasel conducter , received back of distribution transformer

CTN :45298738

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

CTN :45511939

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For angle iron picket , ms flat of size 40 x 6mm length 2 point 10m long , barbed wire , chain link fence shall be fabricated using hot down gi wire of dia 4mm and size of mesh 50x50mm including two line wire , ms nut and bolt 10x50mm with two washers of 3mm thickness , 600mm dia punched type concertina coil , gi binding wire 0 point 9 mm dia , ms round bar 03 nos 10mm dia 4 point 20m long , synthetic enamel paint of og colour 1st quality , zinc chromate primer , thinner , paint brush 3 inch , paint brush 2 inch , fd protection barrier relocatable hesco basket

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45373622

13 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of supply and installation of bottle basket , supply and installation of plate basket , supply and installtion of plain basket , supply and installtion of cutlery basket , supply and installtion of cabinet hinges , supply and installtion of wall mounted empty cutlery holder case , supply and installtion of fruits or vegetable kitchen rack 3 layer , supply and installtion of pyramid kitchen chimney 32 inch , supply and installtion of hvy dty steel dule bowl sink wt all fits 37x18 x9inch , supply and installtion of plywood 18 mm , supply and installtion of wooden false ceiling 6mm , supply and installtion of plywood 10 mm , supply and installtion of sunmica 0 point 8 mm , supply and installtion of sunmica 0 point 5 mm , supply and installtion of mounted spice rack , supply and installtion of led strip light warm , supply and installtion of ppr pipe 25 mm 10 ft long , supply and installtion of kitchen wash basin mixer , supply and installtion of angle cock , supply and installtion of bib cock long neck , supply and installtion of wall moted mtipuse cabi for kitch 6 dor mt finish , supply and installtion of fevicol , supply and installtion of heatex , supply and installtion of nails 1 point 5 inch 14 swg , supply and installtion of nails 1 innch 17 swg , supply and installtion of modular exhaust fan 200mm , supply and installtion of modular board with swith socket 16 a and 6 a , supply and installtion of wiring with casing capping 4mm , supply and installtion of aluminium ceiling hanging light , supply and installtion of ceiling light 2 ft x 2 ft warm , supply and installtion of non skid kitchen floor tiles , supply and installtion of 10 mm screed 1 is to 6 , supply and installtion of wooden door 6 ft x 3 ft , supply and installtion of ms iron hinges 100 mm , supply and installtion of ms sliding bolt 300mm , supply and installtion of tower bolt 150mm , supply and installtion of handle 150mm , supply and installtion of stopper 140mm , supply and installtion of non skid floor tiles 1 ft x1 ft , supply and installtion of 10 mm screed 1 is to 6 for fixing of tiles , supply and installtion of wall tiles 1 ft x 1 point 6ft , supply and installtion of 10 mm screed 1 is to 4 for fixing of tiles , supply and installtion of window glass 6mm , supply and installtion of electric wiring with casing capping 4 mm , supply and installtion of wooden door 8 x 3 point 5 ft , supply and installtion of wall tiles , supply and installtion of 10 mm screed 1 is to 4 , supply and installtion of wooden door 8 ft x 4 ft , supply and installtion of electric wiring with casing capping 4mm , supply and installtion of exhuast fan , supply and installtion of kitchen shelf 4 x 4 ft wooden , supply and installtion of verandah chequred tiles //bid details 2 / 52

CTN :45504813

04 Jul, 2026 10.00 Lacs

Bhilwara - Rajasthan

Tender For sale of various types of scrap - milk packing machine (double head). make :- rmc transformer 500 kva make :- bharat bijli running condition ice cream candy machine scrap. deep freeze scrape. refrigerator scraps. water cooler scrap. compressor (bmc) scrap. ro membrane scrap. ms trolley (pick-up) scrap. scrap of various types of motors. scrap of various types of electrical items. scrap of computer accessories. (led-05 nos., printer -10 nos., cpu-02 nos. keyboard & mouse) iron scrap. aluminum scrap. stainless steel scrap.

Ms Flange Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government