Latest ms flat Tenders | Government ms flat Tenders

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

CTN :45511939

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For angle iron picket , ms flat of size 40 x 6mm length 2 point 10m long , barbed wire , chain link fence shall be fabricated using hot down gi wire of dia 4mm and size of mesh 50x50mm including two line wire , ms nut and bolt 10x50mm with two washers of 3mm thickness , 600mm dia punched type concertina coil , gi binding wire 0 point 9 mm dia , ms round bar 03 nos 10mm dia 4 point 20m long , synthetic enamel paint of og colour 1st quality , zinc chromate primer , thinner , paint brush 3 inch , paint brush 2 inch , fd protection barrier relocatable hesco basket

CTN :45526448

25 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for providing of entry gate on footpath of main entry - m.s. angle , m.s. flat , cutter blade , grinder blade , welding rod , m.s. nut bolt , red oxide primer , s/e black paint, t.t. oil ,painting brush , malmal

CTN :45520970

22 Jun, 2026 9.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of angle iron picket 65x65x6mm , liap support post for picket , chain link frence 100x100 box , ms flat 40x4mm , plain bar 8mm for chain link support , barbed wire 3 stands , construction material cement sand aggregate , fixing and labour charge for 300 meter fence

Central Government/Public Sector

CTN :45512099

26 Jun, 2026 15.09 Lacs

Champawat - Uttarakhand

Tender For supply of ms plate 3x1500x6300mm is2062e250,ms plate 4mm 4x1500x6300mm,ms plate 5mm 5x1500x6300mm,ms plate 6mm 6x1500x6300mm,ms plate 8 mm 08x1500x6300mm ,is2062e250,ms plate 16mm 16x1500x6300mm,ms plate 20mm 20mmx1500mmx3000mm,ss plate 304 thick 6mm 6x1500x3000mm,ss plate thickness 8mm 8x1500x3000 mm,ms flat 25x3mm 6 mtr length,ms flat 50x4 mm 6 mtr length,ms round bar 16mm 6 mtr length,ms round bar 25 mm dia conformity to indian standard 2062 6 mtr length,ss round bar 25 mm dia 6 mtr length,ms angle 50x50x5mm 6 mtr length,ms angle 75x75x5 mm 6 mtr length,ms beam 150x75 6 mtr length

Central Government/Public Sector

CTN :45492473

01 Jul, 2026 NA

Dakshina Kannada - Karnataka

Tender For supply of ms plain plate 10 mmx1250x6300 is-2062, gr a , ismb 200 x 100 is - 2062, gr-a , ismc 75x40 ms channel is- 2062, gr a , ismc 125mm x 65 ms channel, is 2062,gr a , ismc 150x75 ms channel, is 2062, gr.a , isa 65x65x8 ms angle is 2062 gr.a , isa 75x75x8 ms angle - is-2062, gr a , ms plain plate 8mmx1250x0x6300 is-2062, gr a , ms plain plate 12x2500x6300mm is-2062, gr a , 8mm thick ms chequerer plate is 3502 , 150x75 ms beams is-2062 gr a , 250x125 joist is 2062 gr a , 300x140 ms beams is 2062 gr.a , ms beams 400x140 is 2062 gr.a , isa 50x50x6 ms angle is 2062 gr.a , isa 130x130x10 ms angle, is 2062 gr a , 100 x 6mm m.s. flat is 2062 gr a , ismc 100x50 channel is-2062 gr.a

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

State Government

CTN :45488617

24 Jun, 2026 39.82 Lacs

Coimbatore - Tamil Nadu

Tender For engaging 18 nos of sweepers and 4 nos of sewer cleaner under the annual maintenance of 1848 msb flats under tamil nadu government rental housing scheme at kavundampalayam, coimbatore for the year 2026 2027 from 01 07 2026 to 31 03 2027

State Government

CTN :45488618

24 Jun, 2026 33.72 Lacs

Coimbatore - Tamil Nadu

Tender For engaging 8 nos of pump driver and 4 nos of electrician-i under the annual maintenance of 1848 msb flats under tamil nadu government rental housing scheme at kavundampalayam, coimbatore for the year 2026 2027 from 01 07 2026 to 31 03 2027

Ms Flat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government