Get complete information related to latest Ms Frame Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Frame Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Frame Tenders.
Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in
Tender For procurement of cat b stores - wire brush 8" x 3", coir brush size 8" x 3" wood base consisting of 3 long coir strands placed in brush arranged in 8 column and 4 rows, mason thread, ms wire nails, size: 1/1.5", as per 15-723, specification rust free, ms wire nails, size: 2/2.5", as per is-723, specification rust free, ms wire nails, size: 3", as per is-723, specification rust free, ms wire nails, size: 4", as per is-723-specification rust free, ms wire nails, size. 5", as per is-723 specification rust free, ms wire nails, size: 6", as per is-723 specification rust free, pbs roll 1mtr width x 1mm thick x 20 mtz roll, make: superior quality, rope manila 20mm dia, rope manila, 30mm dia, rope manila, 40mm dia, bow handle 6", bow handle 4, glass pane 6'x3x4mm,, make: saint govain/si certification marked, glass pane 6'x4'x5mm,, make: saint govain/si certification marked, glass pane 2 x 1 x 3mm, make: saint govain/is! certification marked, frosted glass panes 30 cmx30cmx4mm, frosted pin headed glass sheet 4mm 91 x 1 mir, glass putty, make: jk/birla, pvc mosquito proofing mesh 15 mir roll, wire mesh 3mm roll of 15mir, wire mesh 6mm roll of 15mir, wire mesh 10mm roll of 15m, wire mesh 12mm roll of 15m, wire mesh 20mm roll of 15m (welded mesh), hessian cloth 54" width, hinges 4", with screw, make:bita/golden/girson/diamond/isi, hinges 2" with screw, make bita/golden/girson/diamond/isi, hinges 3" with screw, make bita/golden/girson/diamond/isi, ms bolt hinges/ butt hinges (100mm long), ms bolt hinges/ butt hinges (75mm long), m seal 100gm, ms screw size: 20mm (3/4") (100 nos/pkt), ms screw, size: 25mm (1") (100 nos/pkt), ms screw, size: 50mm (2") (100 nos/pkt), ms screw, size: 75mm (2") (100 nos/pkt), ms screw, size: 100mm (4") (100 nos/pkt), green cloth, curtain ring, wall putty (20 kgs pack), make: jk/berger, weather coat exterior primer 20 ltr drum, sunmica top wooden finish, size: ext, sliding ball with screw size: 10inch, sliding bolt with screw size: 8inch, sliding bolt with screw size 12inch, door stopper, size: 140mm, item discription: aluminium alloy body and toungh, anodised with hard drawn steel spring fixed in floor, tower bolt size: 8, tower bolt size: 6, brass tower bolt barrel type 150mm, brass lower bolt barrel type 100mm, door window handle 100mm, door window handle 150mm, hydraulic door closer make: godrej, sand paper 80no, sand paper 120no, sand paper 60no, wood primer make: shalimar, varnish 1 lir pack make: asian/pidilite berger, looking mirror 450x800mm, make gold plus/saint gobin/modiguard, while cement (1kg pkt) make jk/birla, floor tiles 1'x1'x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, floor tiles 2 x2 x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, wall tiles 8" x 12' make, somany/jhonson/kajaria/nitco/orient, wall tiles 1' x 1' cerarnic/vitrified), make somany/jhonson/kajaria/orient, pvc false ceiling panels,, colour : white, size: 10x10 long 6-8mm thick, with gi channel and concealed fixing arrangement to roof truss and top side of panels all fitment complete., make: sarah/raunaq/equivalent, drill bit 20mm, drill bit 18mm., drill bit 12mm, drill bit 5mm, plastic rope size: 10mm, gi wire 4mm, cornfirming to is-280: 2006, gypsum screw size 1 (100 nos/pkt) pvc door (out to out size 0.85 x 1.90 mtr), frame 50 x 47 mm made out of 5 mm plan colour pvc sheet reinforce with ms square tube incl pvc shuller 30 mm thickconssting of frame made out of ms tube for top and bottom rail with pvc sheet strip 20 mm width suitable pvc steel bedding complete indis 100 mm ss hinge-30 nos a/u handle 125 mm-02 nos a/u tower bolt 150 mm -02 nos, stainless steel hasp and staple 100mm, door stopper (brass/ordinary type), magnate catch, (make:, amar/mahamaya/crown), gas sparker (gas lighter), gas pipe (lpg), hinges 1" width 3" length, stainless steel curtain rod 20mm dia 1.5mtr length, stainless steel bracket (for 20mm dia curtain rod), stainless steel nobe (for dia curtain 20mm dia),
Tender For supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk - supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk, providing & foxing set of recycled plastic dustbin with msframe stand and top cover capacity upto 60-60l and bin size 2 x 1 x 1 ft. bin thickness 8 mm frame thickness 8 mm weight of minimum 15 kg. and logo of nagar parishad sikar and dustbin written on two side, complete as per direction of officer incharge., providing & fixing of recycled plastic bench with thickness of 18 mm. size: 4.5 x 2.5 x 3 ft. weight loading capacity upto 300 kg. weight of bench approx 70 kg. with logo of nagar parishad tonk written on bench complete as per direction of officer incharge., providing & foxing of square recycled plastic tree guard, with thickness of 8 mm, size: 4ft x 1.3 ft 1.3 ft. with nagar parishad sikar logo on it complete as per direction of officer in charge., supply & fixing of eco friendly products toilet made by recycled waste in various places at nagar parishad tonk with all complete fittings, providing and fixing of recycled plastic peacock for show piece and beautification purposes in parks. with support of msframe isi marked. frame of ms and covering it by lumbers made by mlp waste plastic , also screwed by ss screws. peacock in front made by metal frame internally for support and outside recycled plastic sheets. made by recycled plastic sheets termite proof , water proof , fire retardant and anti thef each lumbers size-: l-4ft, b-6 inch. thickness of recycled plastic sheets-: 8mm and 18mm used. in front flower pots size of 6 inches and big pot size of l-2ft. b-1ft. size can be variable as per officer in charge on site. also coloured as per requirement., outdoor round table (1) , chairv(4) material-post consumer plastic waste thickness-18mm waterproof, fire retardant, strong, screw holding, termite proof & anti- microbial. corrosion free, rust free, heat resistant sturdy & tough
Tender For supply of chairs for branch - ind pre 27(kurlon 32 d foam wooden polish handles class 3 gas pump fiber + metal baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 27 mb(kurlon 32 d foam wooden polish handles class 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 35(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide multi lock mechanism 590 gsm rexineregal castor wheel), ind pre 35 mb(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind pre 14(kurlon 32 d foam chrome handle with foam pedclass 3 gas pump chrome baseworldwide single lock mechanism 590 gsm rexineregal castor wheel), ind net 11(mess back net moulded seat plastic handle powder coated basesingle lock mechanism regal castor wheel), curved sofaproviding and fixing salwood frame inside with 4elastic belt, 4foam with upholstery size 10ft length, curved sofasingle chair providing and fixing salwood frame inside with 4elastic belt, 4foam with upholstery size 3ft length, centre table providing and fixing msframe, glass 10mm with levler bush, centre table providing and fixing marble top with ms with pvd coating base/legs, carpetproviding and fixing fully upholstery fabric material size 4 x 4
Tender For supply of dismantling of old worn out false ceiling material with frame structure of xtr hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of false ceiling in transmitter hall and other technical area at leh, ladakh as per respective drawings , providing and applying of 50mmx50mmx12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and other technical area at leh, ladakh , dismantling of old worn out wall paneling with frame structure of transmitter hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of wall paneling treatment in transmitter hall and technical area at leh ladakh as per respective drawings , providing, fabrication and fixing of cedar or teak wooden planks 75 mm x 15 mm in transmitter hall and other technical area at leh ladakh , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and other technical area at leh ladakh , providing, fabrication, fixing and polishing of wooden table for transmitter hall with console table top 25mm thick wooden board or commercial ply with 1mm thick sunmica sheet , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls surface in xtr hall and technical area, after touching on corners, joints and screw heads , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , fixing of 1ftx1ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out false ceiling material with frame structure of transmitter hall & other technical area, shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling in transmitter hall & other technical area at leh (ladakh) as per drawing sg-10150, 10178/4 and respective drawings. description of scope as per measurement taken at site: providing, fabrication and fixing of g.i metal 22 swg channel (size of channel in mm: 15 x 50 x 50 x15) frame structure base channel frame of transmission booth studio, control room, talk studio and other technical area. providing, fabrication and fixing of frame structure with gi metal sheet channel. for hanging arrangement wall to wall 40mm x 40mm x 2mm ms slotted angles with strap hangers shall be provide as per site requirements to support the gi frame structure. these slotted angles shall be further supported 8mm ms tie rods and 10mm ms fasteners from the real ceiling to make the entire structure in level and //bid details 2 / 24
Tender For repairs painting and replacement of various parts of steel furnitures and charpoy gi iron frame ip folding and bed hard iron frame at umroi mil stn under ge umroi
Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c