Latest ms handle Tenders | Government ms handle Tenders

Central Government/Public Sector

CTN :45733178

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ubl/gsd/0002/ beaters/26/c [pl no.98051118] condemned and un- serviceable beaters scrap consisting of beaters full/broken with/without wooden handle, pick axles, and other similar scrap. available under the custody of cdms/rs ward/gsd/ubl. note: bidder has to physically inspect the lot before bidding. location: road no-2 rs-ward-shead no:01 remarks-. delivery should start from one end. no pick and choose allowed.

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45730943

02 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of locker cabinet of ms , colour -silver or any other colour like silver gray, grey, bottle green etc...... specification:- steel cloths 12 cage locker. type of locker:- 12 locker. material of locker:- mild steel. material of door handle:- electroplated ms handle. locking system:- 5 lever lock. colour of locker:- ilver or any other colour like silver gray, grey, bottle green etc...... [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45710531

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot non ferrous scrap - scrap & cond.aluminium blind socket assembly of sort & sizes, complete or incomplete,with or w/o attachments, as it is,us & ur qty:- 3450 kgs loc:- lying at room no.d,bin no-19,27 and on floor in nbg judw. remarks:- 1)loading by purchaser 2)compositon of blind socket approx. percentage as below:- 1. aluminium = 47.50 % 2. stainless steel handle = 17.40 % 3. brass handle = 17.40 % 4. insulator = 17.10 % 5. copper = 0.60 % 3) delivery will be given by actual weight on electronic weighing scale cap.-1000 kgs..

Central Government/Public Sector

CTN :45702799

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98090616: cond. & u/s. hand tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers, different type of screw driver, hacksaw frame & blades, hammer ball, slege hammer, nose pliers, pipe wrench, hand crimping, faring tool,chisels, torque wrench and all types of wrenches, augars,iron plair, beater, sickle,knife,crow and claw bars,ratchet, tong smith, chiesel, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, tool holder, inside, hammer, feeler gauge, screw gauge, pickaxe,outside micrometres, all types of gauges, handle tap, grease gun adopter, spikes extractor, of sorts and sizes and all other scrap tools as is where is condition with/without attachment of wood/plastic handle. location:tub no.7 inside of ward04/ssd/ptj.

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is

CTN :45697468

10 Jul, 2026 NA

Multi City - Multi State

Tender For auction sale of - cleaning and removal of residual coal and other materials from empty boxn wagons of rakes halting at hagari railway station within the time waiting for line clearance and stock at a nominated place as per the rough sketch attached. - towne & refilling of dcp 05, toeing & refillim of dcp , ton & refillin dcp, ten & refofdcp 7.5 kg, tesving & refilling of dcp 09 k, train & refilling of dcp 10 kg, texting & reling dcp 75 kg, ting & refine of dcp 75 k tilly, trating & refilling coc 02 k, teting & reliling of co2 3.2 kg, tening & refilling of cx2 4.5kg, toodast & refilling of co2 5 k, tin & refilling of co2 fik, testing & refiling co2 6.5 kg, training (2.6kg, trating & refilling cc 09k, toning & refilling of co2 22.3 ke, testing & refilling f type 91m, 35l , p&f of spars of fire extinguishers, dcp5kg/6kg 7.5kg, docharge grip, hose pipe, saliny clip, tip cap, dcp 10 kg k, discharge cimp, discharge nozzle, ducharge valve, hose gh natal, hese pipe, new cartride, rubber washer, safidy clip, de det, dcp 15 kg, discharge inp, dichage nozzle, discharge valve, hime lift noel, home pipe, rubber washar, saficty clip, tupp, trolly whari, 2kg 3.2 4.5 kg co2, discharge valve, hise pipe, safitty clip, toudly wheal, 10 001, valve, hine lift noel, ms hamille, rubber washer, trolly bracket, discharge valse, hose pipe, ms handle, rabber washer, sality clip

Ms Handle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors