Latest ms hinge Tenders | Government ms hinge Tenders

CTN :40130273

09 May, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing open jim upkaran at pathankunwa (near pani ki tanki) in ward no.36 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4in

CTN :40133943

01 May, 2025 2.89 Lacs

Hisar - Haryana

Tender For mayyar, hisar1, supplying and installation of gym equipment (mp) (rt) - mayyar, hisar1, supplying and installation of gym equipment (mp), multy gym six station (leg pull, leg curl with leg extension, biceps with trlceps, pec dee fly):-consists of 4 weighted stations and z light stations: and it is omhinalion of 8 type of excerslce thls is macle up of mainly olympic rectangular pipe of 4 x2 with 2.15mm thickness with steel twisted wire with pvc/nyioncoated cable5mm-6mm: with pvc coated weight plates for noiseless working/ movements, weight plates stack moves/slides in stainless steel pipes for smooth and noiseless movement throughout lifespan of equipments, ball bearing mouted fibre/pvcpullys, heavy ct shion padding on 12mm plys with special non abrasive fabric nontearing tauric.each weight stackis 7skg sheavy., functional trainer mechine :-all pipes made up size 2 x4 of hot rolled hollow rectangular ms pipe with size 193x100x230 cm and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly. bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., superior olympic bench incline :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx. 163x165x137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special non abrasive fabric non tearing fabric. with two vertical pipes have clamp forresting rodonit,used for doing incline level pattern chest press at one fixed incline level)., heavy olympic weight plates stand/rack in tree shape :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.96x63x120 cm with 2.15mm thickness, with 6 round pipes welded { 3 pipes on each side}on which weigh plates are hanged/holded), heavy dumbells stand/rackin double platform :-(made up of mainly olympic rectangular pipe of 4 x2 approx.:more nearest to approx.209x81x83 cm with 2.15mm thickness, with angleiron welded with flat patti with rubber pasted on which dumbbell srestonit,two platform/ shelves), dumble 250 kg. (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect., plates 250kg (20,15,10,5,2.5)made from high quality rubber.tear proof, soundless and bouncy effect, rods 7f/3 and 3f/2 =27f, rod stand, providing and designing and fixing leg press size 153x137x152cm fabricated with 2`x4` recangular hollow pipe complete all respect., arm wheel: providing ,designing and fixing arm wheel in a pair of size 850x800x1800 mm, superior olympic bench flat: ( made up of mainly olympic rectangular pipe of 4`x2` approximate : more nearst to approx. 170x 168x137 cm with 2.15 mm thickness,heavy cusion pedding on 12 mm plys with special non-abresive fabrc etc., superior olympic bench decline:-made up of mainly olympic retangular pipe of 4`x2` approx.: more nearest to 210x166x137 cm with 2.15 mm thickness etc., spare flat bench for dumbbell

Central Government/Public Sector

CTN :40121955

29 Jul, 2025 NA

Harnaut - Bihar

Tender For supply of chest handle (commercial quality) icf/std 4-3-016/col.-i, alt.-'b'. [ warranty pe riod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40098232

14 May, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of gym equipment and installation - dip chin assist machine , horizontal pin loaded chest press machine , preacher curl bench , leg extension machine , standard smith machine with functional trainer , gym bench , multi station gym with 6 exercise stations , professional heavy dipping belt , leather powerlifting belt , adjustable exercise stepper , rowing handle , cable machine attachments , lat pulldown attachments , electronic weighing scale , anti slip yoga mat , barbell squat pad , massage ball , barbell collars , resistance strength bands , gym gloves with wrist support , nylon wrist supporter , ab roller , skipping rope , tricep rope attachment , olympic barbell 7 feet , olympic barbell , olympic barbell holder , medicine ball , half coating kettlebell , motivational poster , ajanta quartz digital wall clock , wooden chess board , bug zapper machine , usi universal punching bag filled , carrom striker , t 3000 commercial treadmill , jpl320 chest press lat pull down , pl4003 shoulder press , pl4007 row , incline chest press machine , flat chest press , e1080 ab coaster , challenge 190kg olympic weightlifting set , hexagon dumbbells , battle rope 9 mtrs br 10 viva fitness

CTN :40091309

13 May, 2025 NA

Belgaum - Karnataka

Tender For supply of 2000 lph ro plant with ss storage tank , sintex tank 3000 ltrs , cpvc pipe 2 inch , cpvc float valve 2 inch , cpvc tee 2 inch , cpvc elbow 2 inch , cpvc tank nipple 2 inch , cpvc union 2 inch , cpvc socket 2 inch , cpvc gate valve 1 inch , cpvc union 1 inch , cpvc pipe 1 inch , cpvc tee 25x20 mm , cpvc brass elbow 20x15 mm , cpvc bib tap 15 mm , cpvc elbow 1 inch , cpvc socket 1 inch , cpvc pipe 20 mm 20 mm , cpvc socket 20 mm , cpvc elbow 20 mm , cpvc tee 20 mm , cpvc union 20 mm , cpvc angle valve 20 mm , supplying of pvc connection pipe , supplying of solvent , ms square pipe 25 mmx25 mm thickness 2.6 mm wt 1.69 kg slash mtr , ms square bar 10mm size wt 0.785 kg slash mtr , ms hinges 4 inch , ms sliding door bolt 250mm , welding rod

CTN :39809377

25 Apr, 2025 NA

Dehradune - Uttarakhand

Tender For bid to ras supply of plywood items - nails wire 0.5 inch , nails wire 1 inch , nails wire 2 inch , nails wire 3 inch , nails wire 4 inch , nails wire 5 inch , nails wire 6 inch , ms hinges 2 inch , ms hinges 3 inch , ms hinges 4 inch , ms hinges 6 inch , ply wood 8ft x 4ft x 4mm , ply wood 8ft x 4ft x 6mm , ply wood 8ft x 4ft x 8mm , ply wood 8ft x 4ft x 12mm , ply wood 8ft x 4ft x 19mm , beeding wooden 0.5inch x 1.5inch x 10ft long , planks chirwood 1 and half inch x 12inch x 10ft , planks chirwood 1inch x 12inch x 10ft , planks chirwood , scantling timber 4inch x 3inch x 10ft , scantling timber 4inch x 4inch x 10ft , scantling chirwood 2inch x 2inch x 10ft , scantling chirwood 3inch x 3inch x 10ft , scantling chirwood 2inch x 3inch x 10ft , lime unslaked , wire mesh 2 mm x 2mm roll of 100sqm , wire mesh 4mm x 4mm roll of 100 sqm , binding wire , ams 200 microfilm thickness hdpe film for shuttering purpose , pbs roll size 1m x 20mtr long

CTN :40072961

12 May, 2025 5.85 Lacs

Bareilly - Uttar Pradesh

Tender For work of installing 10 pieces of open gym equipment in north city colony park in ward-26. - excavation in foundation in ordinary soil including lift upto 1.50 m, prviding and layng cement concrete in 1:4:8 (1 cement:4 coarse sand:8 stone ballast), m-150 class b/w in 1:4 cement csand mortor in f/p incuding supply of all materials, 12mm thick plaster in 1:5with cement csand sand and mortar, finishing wall with acrylic smooth exterior paintof required, cement concrete with 2cm gauge approved stone ballast, approved coarse sand and cement, earth work for filling or embankment in ordinary soil, supply and laying ofc.c interlocking tiles 80mm thick in road pavement, s/f chest pres 100nb gi b-class pipe leg frame:32nb, s/f hand rower frame:80 nb gi-fun rower seat handle frame:32, s/f back extention the main frame of the back extention is to be, s/f cycle 100nb gi-class pipe arm frame :40nb gi-, s/f of circular pul up station the main frame of circular pull up, s/f of abs board double main frame: 80 nb g.i. pipe, s/f of hip twister double circular main frame 100nb, s/f of shoulder exerciser centr pipe:100 nb gi b-class, s/f of leg press double centre pipe :100nb gi b-class, s/f sky/cross walker 100 nb g.i pipes. foot rest pipe, supply and instalation of open air gym outdoor eqipment, supply and placing of doormat on the floor of open gym area

Central Government And Public Sector

CTN :40065883

08 May, 2025 1.80 Crore

Delhi - Delhi

Tender For supply of toy testing equipment for crcl - degree automatic flammability tester , horizontal and vertical flame , mouth-actuated catapult endurance tester for toys , push pull test stand , pen-cap air flow tester , noise testing stand , wide-mouth clamp , clamp for wheel tension , hook test fixture for cords and loops , toys chest lid tester , baby stroller testing machine rotating test , test finger probe and accessibility probe , baby trolley dynamic durability testing machine , baby trolley handle durability , toy kinetic energy tester , baby stroller handle dynamic durability tester , laboratory drying oven , glow wire test apparatus , impact test table , seam clamp for toys tension , mouth-actuated tester , toys flammability tester , sharp edge tester , sharp point tester , flammability testing nailed , dynamic strength tester and 2 , high chair comprehensive testing , toys scooter steering tubes strength tester , small part cylinder , high chair back and arm impact testing machine , ball impact tester , kinetic energy tester , colour fastness to dry cleaning , noise meter , surface flash tester , small torque fixture , rattle test template , middle torque fixture , flexure tester , long - mouth clamp , two pronged clamp , three pronged clamp , average speed tester , brake performance tester , motor brake performance testing ramp , small ball test template , large torque fixture , hand held metal detector , ring gauge , imada digital force gauge , flat clamp , tensile tester , compression test disc , bite tester , tension clamp , motor horizontal brake performance tester , en drop tester , gap test round , short mouth clamp , liquid leak test needle , hair clamp , bench vice , feeler gauge , static strength test , test platform block , dynamic strength test load , static strength test load , overload test loads for ride-on toys and seats , air compressor , loads for stability test , toy handlebar resistance to separation tester , electronic metronome , wheeled toys tumble test steps , plastic and film thickness gauge , toy tester jaw entrapment risk test fixtures , torque gauge gt-tohnichi , part 1 weight cantry crane , toy calibrated test weight , yo-yo balls measurement , breakaway feature separation , toy tester separation tester , part 1 self-retracting ropes tester , toy safety tester self-retracting ropes tester , part 1 length of ropes and chains tester , test instruments length of ropes and chains tester , perimeter of ropes and chains tester , part 1 rattle test template stand , digital torque tester , digital cap torque tester , sound level calibrator , push-pull scale force gauge , drop tester , pacifier tester , part 1 12mm feeler gap gauge

CTN :40045078

30 Apr, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing open gym equipments and playing equipments at various place in ward no. 24 dewas - gym equipments :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipm

CTN :40045084

30 Apr, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing open gym upkaran at anukul nagar ganesh mandir garden, shri ram mandir garden and anukul nagar shitla mata mandir garden in ward no.11 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe

Ms Hinge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector