Latest ms joint Tenders | Government ms joint Tenders

State Government

CTN :40514371

03 Jun, 2025 NA

Delhi - Delhi

Tender For supply of mechanical items for various tubewells installed at loknayak puram, bakkarwala. - supply of gi pipe 50 mm dia, medium class with gi flange welded on both sides, each pipe 3mtr. long with threading work on each side of pipe, each flange should have 4 holes and cut for submersible cable. make: jindal / tata or any other make approved by djb., supply of gi tail piece medium class 0.5 mtr. long inclduing one end flanged and the other end threaded of 50 mm dia., supply of ms clamp 8 mm thick suitable for 8 inch bore dia, complete with nut and bolts and washers for holding the 50 mm dia pipe including bending and shaping etc. as required., supply of gi bend 50mm dia 90 deg. double flange. heavy class, make: ganesh / jindal/ tata / isi, supply of 6 mm thick steel wire rope to hold the pump., supply of required off size threaded nut bolts and washers of good quality., supply of ms bore cover 4 mm thick suitable for 8 inch bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center., supply of neoprene rubber packing 3 mm thick, suitable for 50 mm bore pipe and having 4 holes for nut / bolts.

Central Government/Public Sector

CTN :40511366

11 Jun, 2025 NA

Saharanpur - Uttar Pradesh

Tender For supply of clamps for wag-9hc to clw s specn. no. clw/ms/3/059 alt-6 [ each set is a loco set co nsisting of 4 items as per attached annexure-a ]

Central Government/Public Sector

CTN :40335863

16 Jun, 2025 NA

Roorkee - Uttarakhand

Tender For corrigendum : supply and installation of furniture items for offices and departments at iit roorkee, uttarakhand - executive table including back unit & side unit, executive table-1size: 2100w x 900d x 750h mm., executive table-2size: 1800w x 900d x 750h mm., executive table-3size: 1500w x 750d x 750h mm., back unitsize: 2100w x 400d x 750h mm., back unitsize: 1800w x 400d x 750h mm., back unitsize: 1500w x 400d x 750h mm., back unitsize: 1200w x 450d x 685h mm., chairs(high back, medium back & visitor), high back chairs(leatherette), high back chairs (mesh back), medium back chairs(leatherette), medium back chairs (mesh back), visitor chairs, office storage almirah, glass door almirah, ms almirah, work station, work station-1 (02-seater) size: 1800w x 1200 (600+600)d x 750h mm.partition: 1200(h) mm., work station-2 (01-seater) size: 1800w x 600d x 750h mm.partition: 1200(h) mm., work station-3 (02-seater) size: 1500w x 1200 (600+600)d x 750h mm.partition: 1200(h) mm., work station-4 (01-seater) size: 1500w x 600d x 750h mm.partition: 1200(h) mm., work station-5 (02-seater) size: 1200w x 1200 (600+600)d x 750h mm.partition: 1200(h) mm., work station-6 (01-seater) size: 1200w x 600d x 750h mm.partition: 1200(h) mm., work station-7 (l-type)size: 1800w1 x 1800w2 x600d x 750h mm.partition: 1200(h) mm., work station-8 (l-type)size: 1500w1 x 1500w2 x600d x 750h mm.partition: 1200(h) mm., overhead cabinet, wooden cabinetsize: 900w x 400d x 750h mm., glass door cabinetsize: 600 x 300 x 600 mm.

Central Government/Public Sector

CTN :40511851

12 Jun, 2025 NA

Hubli - Karnataka

Tender For supply of set of helical spring for wag-9hc, as per spec. no. clw/ms/3/spec/eldo bogie/004, alt-2 or latest. one set comprising of 04 items in 64 nos as under: 1) secondary spring (outer) as per drg no. ib 0 11-00842, item- 3 qty/set = 08 nos. 2) secondary spring (inner) as per drg no. ib 011-00842, item1 qty/s et = 08 nos. 3) primary spring (outer) as per drg no. ib 011-00843, item- 3 qty/set = 24 nos. 4) primary s pring (inner) as per drg no. ib 011-00843, item- 1 qty/set = 24 nos. [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :40529682

04 Jun, 2025 NA

Katni - Madhya Pradesh

Tender For paint enamel synthetic brushing finishing exterior black (packing in 20 ltrs new non retu rnable m.s. drum) "this is shelf life items and should be procured with staggered delivery period . supp lier to mention/print date of manufacturing on the item & item to be supplied within 60 days of manufa cture date." specn: is: 8662/2004 with additional requirement stipulated in icf specification no. icf/m/ d/spec 045 issue status 02 revision 03 except clause c3 of is: 8662/2004 the date of supply of the mat erial should b [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40529771

05 Jun, 2025 NA

Coimbatore - Tamil Nadu

Tender For supply of slide cover complete in set (made out of ms sheet with ci flaps) for electric point machine, each set comprising of 1. slide cover complete for drive rod and lock rod to drg. no.rdso/s.10848-a alt- 4/ptj with part drawings. as specified in assembly drawing-2 nos per set. 2. slide cover complete for dete ctor rod to drg no.rdso/s.10848-b alt-5/ptj with part drawings. as specified in the assembly drawing-2 n os per set. components shall be painted all over except on working surface with two priming coats, one of zinc chrome to is:104 followed by another of redoxide zinc chrome to is:2074 and a finish coat of dead bla ck paint to is:8662-2004 for both items 1 and 2 mentioned above. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40515574

06 Jun, 2025 NA

Bengaluru - Karnataka

Tender For procurement of gi pipe ms flange etc24 items

corporations/Associations/Others

CTN :40518860

12 Jun, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of scrap aluminium bars and tubes,scrapped kover cutting and punchings,scrapped pc boards and aluminium clading sheets,mixed miscellaneous scrap,scrapped electrical items,scrapped mild steel parts,scrapped equipments,scrapped electronic items such as printers etc,scrapped testing/measuring equipments panel etc,scrapped aluminium boring and shavings slightly mixed with ms/ss borings,scrapped ss and ms fasteners like nuts screws bolts, washers, rivets etc,scrapped mixed size pcb etc,scrapped metal cooling fans etc,scrapped brass cutting, punching wires, tubes, pipes and rods etc,scrapped various types of connectors attached to wires/cables,scrapped ventilator cabinets and related,scrapped forklift 13 ton,scrapped plastic of all kind,scrapped waste paper / plastic in mix form shredded papers, old records etc

Central Government / Public Sector

CTN :40529349

20 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of set of cab window assembly for wag9 locos as per clw specification no. clw/ms/3/0014 alt-5 consisting of 2 items. 1) cab window left hand side as per clw drawing no. 1209.09.133.005 alt-5. qty/set - 02 nos. 2) cab window right hand side as per clw drawin g no. 1209.09.133.006 alt-5. qty/set - 02 nos." [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40511449

09 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For supply of b check kit for 500 kva d.g. set of eog power car,engine model ,no. cpcb iv . consisting of thease items , (1) filter ,fuel part no -ax1017055 - 01.no, (2) foil, sealed test strips cc2602b , part no. 3403800- 01.no. (3) cartridge fuel filter,part no-5627726 - 01.no. (4) element lub oil filter , part no - ax101 7056 - 01.no. (5 ) filter def , part no, a059z389 (6) inhibitor corrosion 10 liter cap -part no, 4926654 - 01.n o. (7) lube oil ck4 , grade-15w40 - part no , 508305 - 55 leters can 01.no. (8) belt , v ribbed ,part no , 566 3603 - 01.no. (9 ) filter ,diesel exhaust fluid , part no, a035d361- 01.no. 01.set consisting above 09, ite ms. note : make : cummins ,engine model no, cpcb iv . [ warranty period: 30 months after the date of d elivery ]

Ms Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors