Get complete information related to latest Ms Mesh Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Mesh Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Mesh Tenders.
Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu
Tender For bid to ras supply of maint of improved design of iaios , msmesh wire size 12.7 mm x 76.2 mm , msmesh wire size 2600 mm x 800 mm , punched tape concertina coi , punched tape baby concertina coil , fence post type circular hollow section , truss support post with rail end cap , truss support post with rail end cap ms steel tube , straining y arm for supporting top ptcc , intermediate y arm for supporting top ptcc , razor running tape , omega clamp 89 mm dia 35 mm width 3 mm thickness , brace band 89 mm 41 mm width 4 mm thickness , mushroom head bolt with breakable head , eye bolt with loop nut , anchor rod 10mm dia 300mm long , tie wire 1.4mm dia 100mm length , flat clamps for panel connection flat , ss 304 mushroom head bolt, m8x25 , manufacturing sand , aggregate 20mm. , aggregate 40mm. , quick setting compound conforming , ms binding wire , industrial leather safety gloves , heavy duty 4 lbs sledge hamme , steel gurmala planer fabricated from ms steel , cast iron plumb bobs , shovel square , adjustable hacksaw frame , wooden gurmala , bricktrowel , double edge , non metallic fiberglass measuring tape 5 mtr , non-metallic fiberglass measuring tape 30 mtr , heavy duty pickaxes , rivet gun machine , wire cutter 150mm , collapsible y joint 12 ft long , collapsible y joint 10 ft long , heavy duty cutting pliers , ratchet spanner with deep socket 14 mm , flexible transparent pvc leveling tube 25 meters , iron cutter heavy duty , ratchet spanner single socket13mm , hog ring machine with wire , helmet
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122606 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, msmeshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges, hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - 98412103]scrap/ cond /released /unserviceable ss air filters such as fresh air filter and return air filters with or without msmesh attachments on as is where is condition available under the custody of cdms 08ward ap (loc: bin no. 143a at scrap yard)
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0518pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, msmeshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. this material available at lot no.0530 location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0530pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, msmeshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. location road no. 3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0918 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, msmeshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments this material available at lot no.0636. location: road no.3to4cross and road 3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122604 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, msmeshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )