Latest ms mould Tenders | Government ms mould Tenders

Co-operative

CTN :43181456

23 Dec, 2025 2.36 Lacs

Mehsana - Gujarat

Tender For supply of incubator - 4002236, 1.000, hot air ovenouter body made of thick mild steel sheet duly powder coated and inner ss. double walled construction with 2.5 inch gap with best quality glass wool.temperature range: +5 to 250 c fitted with thermostat controller, temperature controller knobperforated shelves and workable on 220 volts 50 hz ac mains. rubber feet are fitted at bottom from corners.with air circulating fancapacity- 45 l, chamber size- 350 x 350 x 350 mm, 4005543, 1.000, hot platemounted on a thick m. s. sheet body, a smooth surface cast iron plate with an electrically operated element laid under the plate. fitted with enery regulator. a three step rotary switch works on 220/230 volts a.c. controls heating. the plate is finished in heat resistant black and the body in stoved blue white painted.rectangular top type, 30 x 35 cm, power rating 1 kw, 4005570, 1.000, ph meter range ph: 0 to 14 phmv measurement : 0+/-1999 mv.(ph, mv and temperature measurement)automatic or manual temperature compensation.3 point ph calibration,display : 4 digit led displaystandard buffer capsules: 4,7 & 9.2 phelectrode:1 set of electrode, stand & clamp, 4063710, 1.000, paneer mouldmaterial: ss-304 (food grade, corrosion resistant).shape: square / rectangular (with perforated sides and bottom) dimensions (approx.):length: 150180 mm, width: 150180 mm ,height: 120150 mm, wall thickness: 1.01.2 mmfinish: smooth, polished, easy to clean. capacity: ~12 l milk curd (~250500 g paneer per mould).accessories: detachable lid/cover for pressing., 4020915, 1.000, pilot scale cream separatortype semi automatic tank capacity : 5 ltr 10 ltrbody material : ss 304 and ms

State Government

CTN :42975278

29 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

State Government

CTN :43163848

17 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For auction sale of (1) heavy duty air compressor (excluding motor) (2) light duty air compressor (excluding motor) (3) mould (mould for making plastic tools) (4) injection moulding machine (scrap condition with electric panel board-4 nos.) (5) grinding machine (excluding motor) (9) air cooler no.-3 (7) earth scooter (in broken condition no. gj-1 eg 6546) (8) m.s. cupboard and small rack 1 no. (9) prepared plastic container bags (10) frp cooling tower no.-1 (11) trolley with wheel no.-1 total items-11 (eleven)

State Government

CTN :43117877

22 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43117911

29 Dec, 2025 NA

Ujjain - Madhya Pradesh

Tender For supply, installation and repairing of laboratory equipments and smart class room items - projector, color laser printer, power hacksaw, bench drilling machine 13mm, portable tig & arc welding machine, power wrench, ultrasonic thickness gauge, digital caliper, liquid limit apparatus, sieve set 200mm, core cutter with mould, split spoon sampler, permeability apparatus falling head and constant head, orifice, venturi & rotameter test rig, bernoulli s theorem apparatus, losses in a pipe due to friction in pipe lines, reynolds s apparatus, losses due to pipe fitting, sudden enlargement & contraction, notch apparatus, emissivity measurement apparatus, stefan boltzmann apparatus, heat transfer through natural convection, heat transfer through lagged pipe, heat transfer through composite wall, thermal conductivity of insulating powder, thermal conductivity of insulating slab, rotary vacuum filter, frame & filter press, filter press, screw conveyer, belt conveyer, internet of things trainer kit, interactive panel, graphic tablet, tablet, ms office home & business 2024 edition 12 user, handheld scanner, ups, matrix led panel, digital notice board, cctv camera setup, supply and installation of smart class room items

CTN :42967147

19 Dec, 2025 8.00 Lacs

Banda - Uttar Pradesh

Tender For tender for gram panchaayat saimaree mein muktidhaam ka nirmaan kaary. - boring of 300mm3.5 met depth doubble under reamed pile in black cotton soil i/c all etc., rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in pile (dsr no. 5.1.3), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in beam (dsr no. 5.1.3), rc.c. in 1:1.5:3 cement sand & 20mm. gauge stone grit.in columns (dsr no. 5.2.2), m150 class brick work with 1/4 c/sand morter in foundation (dsr no. 6.3.2), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.inbeam (dsr no. 5.3 (a)), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in slab beem (dsr no. 5.3 (a)), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in slab (dsr no. 5.3 (a)), ms iron work in plain work such as rainforcementin rcc (dsr no. 5.22.1), 12mmthick plaster work with 1:4 c/sand morter i/c all etc (dsr no. 13.1.1), e/w work filling in room by 1km tt out of side to work site, laying 4cm thick dpc with p/s 13 mm stone grit (dsr no. 11.3), finishing wall with acrylic smooth exiterior water proof paint (dsr no. 13.46), providing , laying spreading and compacting stone dust in blanket coat compacted thickness on a prepared base and compacting with power roller including all materials,machinery,labour& t& p etc.complete, construction of granular sub-base by providing wellgraded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at omc and compacting with smooth wheel roller to achieve the desired density complete as per technical specification clause 401, supply and laying of 80mm th paver block rubber mould interlocking, supply & fixing sign board/photograph

Ms Mould Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

State Government

State Government