Get complete information related to latest Ms Panel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Panel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Panel Tenders.
Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, mspanel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete
Tender For sale of scrap materials through short term e-procurement - compactor machine no 2470 model 860 h, vibratory conveyers (3 mtr length), welding transformers, air compressor, hydraulically operated concrete block making machine double vibration system 6.5 hp items no 1.solid mould 16 inch x4 inch x8 inch items no 2. solid mould 16 inchx6 inchx8 inch items no 3. solid mould 16 inch x8 inchx8 inch, colour mixer-3hp-3 phase, vibrating table 2hp-3 phase, concrete mixing miller 5 hp, ms scrap materials like ms rods, ms pipe, ms grills, tmt rods, ms sheets and other ms related items, jolting machine, bending machine, mixer machine hp kirloskar engine (1 bag capacity)
Tender For supply of eee lab items - furniture, 5hp/3.75kw/415v1500rpm three phase(3 )synchronous motor with starting / loading arrangement and with work bench voltage:415v ac/220v dc for field excitation make: benn rating: 5hp/ 3.75kw speed:1500rpm no of poles : 4 synchronous starter dc excitation field current :0.8a digital voltmeter ac(0-500v) moving iron type:01qty digital ammeter ac(0-20a) moving iron type :01qty digital ammeter dc(0-2a) moving coil type :01qty digital power factor meter 600v/10a :01qty 3pole mcb/dc mcb with 20a fuse carrier and supply indicators (three pin plug socket should also be provided) :03qty digital rpm indicator with proximity sensor: 01qty banana connectors for motor/starter/supply outputs :01qty control panel (hylem sheet(5*1.5feet) with mspanel) :01 work bench spec: size: 4feet*3feet*2 1/2 feet height leg teak wood with top 3/4" inch plywood 18mm plywood withone mica sheet for finishing front side cupboard with door open and closed type back side wiring box with door open and closed type, performance of ultrasonic and moisture sensors(5v dc/15ma(40khz/digital output) arduino uno: microcontroller-atmega328p on-board digital sensor components two push button switches and dour leds buck converter and relay for 5v and potentiometer-one each 2x16 liquid crystal oscillator(lcd) and mini bread-one each onboard digital sensor modules: ultrasonic sensor module(3cm-100cm) and soil moisture sensor -one each all sensor modules should be mounted on legend size pcb, speed control of ac motor using variable frequency drive(vfd) (0.5hp/415ac/5a(3 )) variable frequency driver (vfd) unit: input voltage:single phase, 230v ac +-10%, 50hz output voltage : three phase output frequency range: 0 to 60hz suitable for 0.75kw motor output current 4.2a vf pattern of spwm control 2pole mcb for on/off control of mains ac voltmeter, ammeter and speed indicator should be provided external stop/start and frequency control should be provided output terminals should be provided and must be brought out in front panel experimental board should be housed in a cabinet with suitable cover three phase induction motor motor type:squirrel cage |rating:0.5hp voltage rating :415v ac speed :1440rpm+-5% insulation : class b/f
Tender For auction sale of depot miscellaneous scrap - unserviceable scrap ms different types of p-way and engineering tools such as crow bar, claw wire, beater iron, mould shoes, phawarah, scissors garden, belcha, ms shawel, gainti, pahari, hand hammer, local made spanner, chiesel, rod, auger and other similar type of p way tools, known or unknown ms items in various sizes. not fit for railway use. location;- west side of ward no ¿ 98 beside road lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208
Tender For auction sale of others - mspanel patches ¿ 80.000 mts- delivery on actual weightment basis. lot no 5312 26 05 07 gtl gy pp ap. available with sse c w gyscrap cond u/s released mspanel patches total qty: 80.000 mts.total quantity: 80.000 mt ( approx)available at behind atc scrap yard boxn depot gooty... ds-8 no. 531200004, dt. 21.05.2026. hsn code: 720429/gst18%).note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.
Tender For supply of equipment for electrical and electronics engineering department - supply of equipment forelectrical and electronics engineering departmen, loading rheostat 3 phase :specification :rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated mspanel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , loading rheostat 1 phase :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated mspanel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , single phase resistive load :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated mspanel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , three phase capacitor bank :specification :3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided , plc tranier kit:specification :plc make :allen-bradley / delta electronics / siemens orequivalentdigital inputs : 8 20 nos.digital outputs : 6 12 nos. (led / relay type indication)communication port : rs232 / usb / ethernet (if available)programming method : ladder logic programmingtoggle switches for digital input simulationled indicators for output status indicationanalog potentiometers for analog input experimentsproximity sensor interface providedrelay output interface providedinput supply : 230 v ac, 50 hzbuilt-in regulated 24 v dc power supplyladder diagram programming software to be providedcompatible programming software license to be providedsuitable for basic plc programming and automationexperiments
Tender For supply of ms chair w/o armrest to is:3499 (part-1) with mould. dimension shall conform to is:3663-1981, frame color-698 & seat color-353 of is: 5-94, packing instruction- pi012.as per attached specification[ warranty period: 30 months after the date of delivery ] ]
Tender For purchase of lab equipments for eee dept - purchase of lab equipments for eee dept, single phase transformer.itemcode:b002 single phase transformer,rating: 1 kva, 50 hz, input: 230 v acoutput: 115 v ac,type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation)., acidity test kit itemcode:b005specifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, dc stepper motor drive kit with stepper motoritemcode:b010specifications:stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet withprinted circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection, dc servo motor drive kit with servo motor itemcode:b011specifications:input supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided, three phase resistive load itemcode:b013specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated mspanel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, single phase single pulse / sinusoidal pwm inverter using mosfet/igbt kit itemcode:b028specifications:type : single phase pwm inverter trainer power device : mosfet / igbt based inverter circuit input supply : 12 24 v dc output voltage : 30 v rms ac output phase : single phase output frequency : 0 50 hz variable output power : 100 w single pulse pwm operation sinusoidal pwm (spwm) operation variable frequency control pwm generation and firing control circuit inbuilt gate drivercircuit provided test points provided for waveform observation and analysis built-in resistive load provision, on / off control of lamp using solid state relay kit itemcode:b029specifications:type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status, speed control of ac motor using vfd drive module with ac motor itemcode:b030specifications:type : variable frequency drive (vfd) module input supply : 415 v ac, three phase, 50 hz o