Latest ms pipe laying Tenders | Government ms pipe laying Tenders

State Government

CTN :41297505

18 Aug, 2025 16.31 Lacs

Asansol - West Bengal

Tender For additional work for laying different dia ms pipe through hume pipe and allied works at at 3 (three) nos. location at lalganj domohani road (zone-11) under rcfa division-i phe dte.

State Government

CTN :41227960

04 Aug, 2025 2.45 Lacs

Karaikal - Pondicherry

Tender For providing and laying hume pipe for a size of 300mm dia across bund crossing from thondamangalam road culvert to konnakaveli road bridge at varichikudy village in kottucherry commune

State Government

CTN :41128343

04 Aug, 2025 12.67 Lacs

Asansol - West Bengal

Tender For additional work for laying different dia ms pipe through hume pipe and allied works at kelejhora health centre more (zone-11) under rcfa division-i phe dte.

CTN :41230280

12 Aug, 2025 5.00 Lacs

Sagar - Madhya Pradesh

Tender For inviting rates for supplying of repairing and construction material/equipment the financial year 2025-26 - inviting rates for supplying of repairing and construction material/equipment the financial year 2025-26, boulder with spreading 0.75 to 20 c.m., fata with spreading rubble stone, stone- black / redstone masonary, steel bars 6,8,10,12,16mm dia hysd bars (as per isi specification), soft murrom with spreading, hard murrom with spreading, bajra with spreading, course sand as per specification, fine sandshahgad sand, crusher stone dust with spreading, 06 mm metalb.b. metal, 12 mm metalb.b. metal, 20 mm metalb.b. metal, 40 mm metalb.b. metal, 90 mm metalb.b. metal, crm( mix in plant ) for 45 mm max size, crm( mix in plant ) for 53 mm max size, red sand stone (flag stone)fine dressed with rough backing 70 mm thick, red sand stone (flag stone) fine dressed with rough backing 60 mm thick, red sand stone (flag stone)fine dressed with rough backing 50 mm thick, red sand stone (flag stone)fine dressed with rough backing 40 mm thick, red sand stone (flag stone) fine dressed with rough backing 300mm thick, flag stone 150 mm to 200 mm dasa, kota stone, green & black1 to 1 1/4, bricks (gitta)8 x 4 x 4 open bhatta, bricks (local)9 x 4 x 3 open bhatta, lime dust, limedingla, yellow soilpirotha, red soilgeyuri, half round r.c.c. pipe150mm dian.p.-2 with laying complete, half round r.c.c. pipe250 mm dian.p.-2 with laying complete, half round r.c.c. pipe300 mm dian.p.-2 with laying complete, half round r.c.c. pipe450 mm dian.p.-2 with laying complete, providing and placing in position r.c.c. hume pipe200 mm dian.p.-2, providing and placing in position r.c.c. hume pipe300 mm dian.p.-2, providing and placing in position r.c.c. hume pipe450 mm dian.p.-2, providing and placing in position r.c.c. hume pipe600 mm dian.p.-2, providing and placing in position r.c.c. hume pipe1000 mm dian.p.-2, providing and placing in position r.c.c. hume pipe n.p.3 300 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 450 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 600 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 1000 mm dian.p.-3, r.c.c. hume pipe n.p.3 1200 mm dian.p.-3 with laying complete, providing and placing in position r.c.c. hume pipe n.p.4 300 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 450 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 600 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 1000 mm dian.p.-4, r.c.c. hume pipe 1200 mm dian.p.-4 with laying complete, r.c.c. cement pole2.20 m-h2.20 m-h, r.c.c. cement pole2.40 m-h2.40 m-h, barbed wire steel9.38 k.g. per 100r. m., wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, winding wirewire, welding gaslabour complete with accessories, welding electriclabour complete with accessories, steel i sections all sizei.s.i. mark, steel door & windows with all fittingsangel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, collapsible shutter with all fitting (steel), iron chamber/drain grill (complete with labour and fixing), corrogated g.i. sheet0.63 mm, corrogated g.i. sheet0.80 mm, distemper asianinterior i.s.i., emulson asian companyinterior i.s.i., oil paints asian tractor all colouri.s.i. marka, brushes1 1 i.s.i, brushes22 i.s.i, brushes33 i.s.i, brushes44 i.s.i, brushes55 i.s.i, cement p.p.c. isi markisi mark each bag of 50 kg, cement o.p.c. isi markisi mark each bag of 50 kg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, lime washing labour, distemper washinglabour, emulsion wasinglabour, oil paints paintinglabour, putty double coat with finishinglabour, steel bindinglabour, transportation of malma with loading & unloading0 to 1 km, transportation of malma with loading & unloading1 to 2.5 km, transportation of malma with

CTN :41228018

04 Aug, 2025 11.68 Lacs

Chandigarh - Chandigarh

Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

State Government

CTN :41175103

01 Aug, 2025 NA

Shimla - Himachal Pradesh

Tender For providing and laying 600mm hume pipe culvert at rd. 7/200 and laying of pvc pipe in trench

CTN :41167800

25 Aug, 2025 15.00 Lacs

Damoh - Madhya Pradesh

Tender For inviting rate for construction material as given in the list for the financial year 2025-26 - inviting rate for construction material as given in the list for the financial year 2025-26, hard murrom with spreading, course sand sand, fine sand barman sand, crusher stone duststone dust, 06 mm metal crushed. metal, 12 mm metal crushed. metal, 20 mm metal crushed. metal, 40 mm metal crushed. metal, 90 mm metal crushed. metal, bricks (local)9 x 4 x 3, r.c.c. hume pipe300 mm dian.p.-3, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. cement pole2.40 m hight, wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, winding wire, iron chamber/drain grill (complete spot fitting with labour), corrogated g.i. sheet0.63 mm0.63 mm, cement o.p.c. isi markisi mark 50kg beg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, putty double coat with finishinglabour, roller machine with diesel & operetor, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 25mm thick kota stone, 16 to 18 mm thick granite stone of any colour and shade, vetrified tiles60 x 60 cm 10mm thick 15:15622, glazed tiles300 x 300 mm 10 mm thick 15:15622, tiles / marble fitting labour charge, pvc floor carpet, w.c. 580 x 440 mm with footrest & p-trap with fittingodisa petarn, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick ordnory cement, m.s. tube steel frame febrication work including all fitting labour charge, m.s. angle steel frame febrication work including all fitting labour charge, providing and laying cement concrete m20 grade work with required & equipmentlabour, aluminium fram work complete (glass/acp sheet/grill), hydra machine, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, wall painting with plastic emulsion paint of approved paint, removing white or colour wash by scrapping and sand papering complete, distempring with oil bound distamper water proof paint complete, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq mm including cutting the patches in propper shape, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing ply 19 mm thick, providing carpentar for furniture work, providing and fixing 60 mm thick paver block 30 n/sqmm, brick masonary work with open bhatta complete, water proofing treatment on roofs of slab by asian paint, indigo, etc with water proofing compound 3 layer with crakseal, putty, labuar complete, pvc pipe 3 inch dia 4kg/cm2, pvc pipe 3 inch dia 4kg/cm2 elvo

corporations/Associations/Others

CTN :41096449

29 Jul, 2025 NA

Mettur - Tamil Nadu

Tender For removal of accumulated fly ash silt from the lorry wash water shed drains, effluent collection sumps and dismantling the existing damaged rcc hume pipe and laying of flooring to lorry wash